Welcome to download the newest Pass4itsure 300-320 dumps: http://www.pass4itsure.com/300-320.html

Pass4itsure presents the highest quality of Adobe 9A0-061 practice material which helps candidates to pass the Adobe 9A0-061 exams in the first attempt.The Pass4itsure are the latest,authenticated by expert and covering each and every aspect of Adobe 9A0-061 exam.

QUESTION 108
Which is a system requirement for the use of a GPU transition?
A. a CPU that is at least 3.0 gigahertz
B. at least 512 MB of system memory
C. a graphics card that supports Direct X and hyperthreading
D. a graphics processing unit that supports Pixel Shader 1.3 or higher

Correct Answer: D QUESTION 109
Click the Exhibit button.
You have a video clip in Video Track 1. You have a white title in Video Track 2. You apply the Track Matte Key effect to the clip in Video Track 1 and set the Matte parameter to a value of Video 2 as shown in the exhibit.
What composited effect does this create?

A. a white title over a video clip
B. a black title over a video clip
C. video showing through the letters of the title
D. video showing everywhere except through the letters of the title

Correct Answer: C QUESTION 110
You want to overlay a timecode display on a video clip. What should you do?
A. apply the Timecode effect to the clip
B. generate timecode text with the Titler
C. choose the appropriate settings in the Playback Settings dialog box
D. drag the timecode display from the Timeline to the Program Monitor

Correct Answer: A QUESTION 111
Where is the default anchor point from which the position of the clip is measured?
A. the center of the clip
B. the upper left corner of the clip
C. the upper right corner of the clip
D. the center of the top edge of the clip

Correct Answer: A QUESTION 112
Which option in the Project Manager dialog box specifies extra frames in the Trimmed Project to permit minor edits?
A. Make Offline
B. Include Handles
C. Include Preview Files
D. Exclude Unused Clips

Correct Answer: B QUESTION 113
Which option in the Project Manager panel allows you to have extra footage at each end of your trimmed clips?
A. Include Handles
B. Include Preview Files
C. Include Audio Conform Files
D. Rename Media Files to Match Clip Names

Correct Answer: A QUESTION 114
You want to create a video project that does NOT conform to common DV, HD or HDV settings. You want to use this project as a template for future projects. What should you do?
A. click the Load Preset tab; expand the DV-NTSC folder; select the settings that match your video
B. click the Load Preset tab; expand the Adobe HDV folder; select the settings that match your video
C. click the Custom Settings tab; choose the settings that most closely match the attributes of your clip
D. click the Load Preset tab; select the appropriate preset that most closely matches the attributes of your clips

Correct Answer: C QUESTION 115
You want to create a still picture montage in your video. You also want all of the pictures to fit in the viewable frame. What should you do?
A. re-size the pictures to the desired scale by using Photoshop
B. use project settings that will match the size of most of your stills
C. choose Edit > Preferences > General > Default Scale to Frame Size
D. import the pictures and re-size them on an individual basis by using the Scale parameter in the Effect Controls panel

Correct Answer: C QUESTION 116
You want to ensure that your video playback is displayed in the Program Monitor. What should you do?
A. select the Desktop Video checkbox in the Playback Settings dialog box
B. select Compatible in the Desktop Display Modes area of the Playback Settings dialog box
C. select None from the Export External Device dropdown menu in the in the Playback Settings dialog box
D. select the Disable Video Output When Premiere Pro is in the Background checkbox in the Playback Settings dialog box

Correct Answer: A QUESTION 117
You have created an offline project. You need to bring this project into an online editing system, and you need to re-capture the files with high-quality settings. To accomplish this, you should use the Project Manager and create a Trimmed Project _____.
A. excluding unused clips
B. selecting Make Offline
C. selecting Include Handles
D. selecting Rename Media Files to Match Clip Names

Correct Answer: B
QUESTION 118
You want to play your NTSC video on a CD-ROM. Which export option reduces the data rate significantly without making the motion appear too choppy?
A. 24P
B. 30 fps
C. 15 fps
D. 29.97 fps

Correct Answer: C
QUESTION 119
You want to hide the preview thumbnail in the Project panel. What should you do?
A. choose View > Icon from the Project panel menu
B. choose Edit Columns from the Project panel menu
C. choose Thumbnails > Off from the Project panel menu
D. choose View from the Project panel menu and deselect Preview Area

Correct Answer: D
QUESTION 120
How does Adobe Premiere Pro treat 24P footage when you import it?
A. as 24 fps interlaced footage
B. as 23.976 fps interlaced footage
C. as 24 fps progressive scan footage
D. as 23.976 fps progressive scan footage

Correct Answer: D
QUESTION 121
What is the relationship between rendering a source clip and a nested sequence it is within?
A. A sequence is always rendered separately from the source clip.
B. Rendering the sequence will also render the source clip it contains.
C. Rendering the source clip will always render the sequence it is within.
D. Rending the source clip will render the sequence it is within as long as there are no effects or filters on the sequence.

Correct Answer: A
QUESTION 122
You are editing footage using the Multi-Camera Monitor. Which color is the active camera’s border while it is in Playback Mode?
A. red
B. blue
C. green
D. yellow

Correct Answer: D QUESTION 123
Which statement about a rolling edit is true?
A. It changes a clip’s speed to fit a duration.
B. It trims a clip and shifts subsequent clips in the track by the amount you trim.
C. It shifts a clip in time, while trimming adjacent clips to compensate for the move.
D. It trims an adjacent Out point and In point simultaneously and by the same number of frames.

Correct Answer: D QUESTION 124
What should you do to change the order in which your clips are playing in a sequence?
A. use the Ripple Edit tool; move the clip to the new position
B. use the Selection tool; press the Alt key; drag the clip to the new position
C. use the Selection tool; press the Control key; drag the clip to the new position
D. select the clip; drag it to a different layer; move the appropriate clips; position the clip in the new position

Correct Answer: C QUESTION 125
Click the Exhibit button.
Given the information shown in the exhibit, which statement is true?
A. Clips will be in sync if they start at the point in time where the CTI is.
B. The starting point of the master clip is used to synchronize the clips.
C. Synchronize the clips by placing the clips at the start of the sequence.
D. The In point of the clips in the sequence are used to synchronize the clips.

Correct Answer: D QUESTION 126
Click the Exhibit button.
In the exhibit, which display format is used to signify 30 fps drop-frame timecode?
A. A
B. B
C. C
D. D

Correct Answer: A
QUESTION 127
What happens when you use the Slip tool to drag the center clip of three clips to the left?
A. The duration of the center clip changes.
B. The In and Out points of the center clip change.
C. The Out point of the clip to the left is shortened.
D. The In point of the clip to the right is lengthened.

Correct Answer: B
QUESTION 128
Which statement is true?
A. All the sequences in a project share the same timebase.
B. Only PAL projects can have different timebases in their sequences.
C. Only NTSC projects can have different timebases in their sequences.
D. Different sequences in the same project can have their own timebase.

Correct Answer: A
QUESTION 129
You have a timecode value selected in the Timeline panel. Which keyboard sequence takes you directly to the 1450th frame of the clip?
A. :1450
B. +1450
C. ;1450
D. .1450
Correct Answer: D
QUESTION 130
Which function is performed when the Show Video option is selected in the Adobe Title Designer?
A. The video output is toggled on or off to an external monitor.
B. The frame of video where the CTI rests is overlaid on the title.
C. The title is overlaid on the frame of video where the CTI rests.
D. The frame of video where the CTI rests is displayed and saved in the backgroud of the title.

Correct Answer: C QUESTION 131
Click the Exhibit button.
Given the image shown in the exhibit, what happens if you click and drag the cursor to the right in the Effects Control tab?

A. Only the Wipe transition shifts to the right.
B. Only the position of the cut between the two clips shifts to the right.
C. The length of the movie increases by the amount dragged to the right.
D. Both the Wipe transition and the cut between the two clips shift to the right.

Correct Answer: D
QUESTION 132
You are using the Adobe Title Designer. Which title property should you change to increase the space between lines of text in a title?
A. Aspect
B. Leading
C. Kerning
D. Tracking

Correct Answer: B
QUESTION 133
What happens when you use the Slip tool to drag the center clip of three clips to the left?
A. The duration of the center clip changes.
B. The In and Out points of the center clip change.
C. The Out point of the clip to the left is shortened.
D. The In point of the clip to the right is lengthened.
Correct Answer: B
We help you do exactly that with our high quality Adobe 9A0-061 Certification using the above training materials.Regardless of whichever computer you have, you just need to download one of the many Adobe 9A0-061 PDF readers that are available for free.

Welcome to download the newest Pass4itsure 300-320 dumps: http://www.pass4itsure.com/300-320.html

Adobe 9A0-061 Preparation Materials Free Dowload, The Most Recommended Adobe 9A0-061 Practice Exam On Sale

Flydumps is providing complete solutions for Adobe 9A0-061 that will help the candidates learn extensively and score exceptional in the Adobe 9A0-061 exam. Passing the Microsoft is not a dream anymore as our user friendly learning resources ensure guaranteed success.

QUESTION 75
What do you do to convert your static title into a rolling title?
A. choose Title > New Title > Default Roll
B. choose Title > Roll / Crawl Options > Roll
C. choose Title > New Title > Based on Template
D. choose Title > New Title > Based on Current Title

Correct Answer: B
QUESTION 76
You want to export a small portion of your Timeline to a movie file. To accomplish, this you should _____ and choose Work Area Bar as the Range to export in the Export Movie Settings panel.
A. select the clips you want to export
B. group the clips together that you want to export
C. scale the Timeline panel to show the clips you want to export
D. set the Work Area Bar over the portion of the Timeline you want to export

Correct Answer: D QUESTION 77
To export only a portion of a clip, you select the clip and _____.
A. choose File > Export > Trimmed Clip
B. place it in the sequence and then export the sequence
C. choose File> Export> Movie, then set the In and Out points
D. set In and Out points, choose File > Export > Adobe Media Encoder and set Range to In to Out

Correct Answer: D QUESTION 78
What do you do to export a movie to be played on a CD-ROM?
A. choose a codec that will work best in your system
B. choose a codec that will work best at slower bit rates
C. identify the limits of the fastest / newest system and encode the file, based on this system
D. identify the limits of the slowest/older system configuration and encode the file, based on this system

Correct Answer: D QUESTION 79
You want to crop a few pixels from the edges of a video that will be encoded to Windows Media format using the Adobe Media Encoder. Where is this function enabled in the Adobe Media Encoder Panel?
A. on the Video tab
B. on the Others tab
C. on the Source tab
D. on the Audiences tab

Correct Answer: C QUESTION 80
To make Clip Notes comments, you should play the video embedded in the PDF file, _____.
A. set markers and write comments on the markers
B. pause when needed, and write comments in the Text Box
C. write comments in the appropriate parts of the video image
D. write comments on a separate file, and combine them during export

Correct Answer: B QUESTION 81
How does enabling the Video Noise Reduction Filter in the Adobe Media Encoder Export Settings reduce noise?
A. by softening the image
B. by using 2 pass encoding
C. by increasing the bandwidth the file requires
D. by sharpening the images in the exported video file

Correct Answer: A QUESTION 82
What do you do to view Clip Notes comments that are inside a Clip Notes comments file?
A. choose File > Open and choose the Clip Notes file
B. choose File > Import and choose the Clip Notes file
C. choose Clip > Overlay; choose the Clip Notes file; double-click the Clip Note icons that appear in the Program Monitor or Timeline
D. choose Sequence > Import Clip Notes Comments; choose the Clip Notes file; double-click the sequence markers that appear in the Time Ruler

Correct Answer: D QUESTION 83
What should you do to export your sequence as a series of bitmaps?
A. choose File > Export > Bitmap
B. choose File > Export > Movie > Bitmap
C. choose File > Export > Frame > Bitmap
D. choose File > Export > Adobe Media Encoder > Bitmap

Correct Answer: B QUESTION 84
Which is the primary advantage of VST plug-in support in Premiere Pro?
A. VST effects do NOT need to be rendered.
B. VST effects may be applied to any audio clip.
C. VST effects may be applied to any audio track.
D. VST effects may be downloaded from third parties.

Correct Answer: D QUESTION 85
You have a stereo audio clip that was recorded with narration in the left channel and ambient sound in the right channel. You want to be able to easily adjust narration and ambient sound independently. What should you do?
A. send the clip to a Submix Track
B. use the Balance control in the Audio Mixer
C. use the Source Channel Mappings to map the source to Mono
D. use the Source Channel Mappings to map the source to Stereo

Correct Answer: C QUESTION 86
Where do you apply an Audio Track effect, without using keyframes?
A. in the Timeline panel
B. in the Audio Mixer panel
C. in the Effect Controls panel
D. in the Audio Waveforms panel

Correct Answer: B QUESTION 87
You want to adjust the levels of an audio track by using the automation modes of the Audio Mixer. During Timeline playback, you want the automation to begin recording volume keyframe adjustments when you drag the volume slider. You want to stay at that volume until you drag the slider to a new position. Which automation mode of the Audio Mixer accomplishes this?
A. Read
B. Write
C. Latch
D. Touch

Correct Answer: C QUESTION 88
Your workstation has an ASIO capable sound card which you want to use to record input audio devices directly to a sequence. Where should you set the input volume for these devices prior to recording?
A. the Audio Mixer
B. the Audio Hardware preferences
C. the audio track in the destination sequence
D. the audio settings for your ASIO capable sound card

Correct Answer: D QUESTION 89
What should you do to pan a track that is mastered to 5.1 surround?
A. use the Timeline and create Pan keyframes
B. use the Timeline and adjust the Pan keyframes
C. use the Audio Mixer and use Pan left / Pan Right
D. use the Audio Mixer and drag the puck anywhere within the square

Correct Answer: D QUESTION 90
How should you use the audio mixer to control all audio tracks, project-wide?
A. use only the Master Track settings in the Audio Mixer
B. set up a Master Sequence and nest the other sequences within it
C. set In and Out points in the Audio Mixer that surround the entire project
D. use the Show/Hide Tracks menu selection to make sure all the tracks in the project are visible

Correct Answer: B QUESTION 91
How should you edit an audio track that needs to be trimmed an amount less than a single frame?
A. set the timecode display to use audio units
B. adjust the timecode to display in fractional frames
C. zoom in on the audio track to get more resolution in the Timeline
D. set the work area to surround only the frame that contains the edit point

Correct Answer: A QUESTION 92
You want to move many of your audio clips to different locations in a sequence. You also need to adjust the volume of all of the clips. To accomplish this, you should adjust the volume _____.
A. on the clips then move the clips to the new locations
B. on the track then move the clips to the new locations
C. in the Master track then move the clips to the new location
D. using the Audio Mixer then move the clips to the new locations Correct Answer: A
QUESTION 93
What should you do to add a DVD marker to the Timeline?
A. drag the marker from the DVD Layout panel
B. drag the marker from the Tools panel to the sequence
C. place the CTI where you want the marker to be; right-click; choose Set DVD Marker
D. place the CTI where you want the marker to be; choose File > DVD > Set DVD Marker

Correct Answer: C
QUESTION 94
What is the maximum number of numbered sequence markers you can place in an individual sequence?
A. 64
B. 100
C. 128
D. unlimited

Correct Answer: B
QUESTION 95
Why would you choose to burn a DVD to an ISO Image rather than directly to Disc or Folder?
A. The encoding quality is better.
B. The encoding process goes faster.
C. You have the capability to burn the image to disk using other DVD burning tools.
D. Burning to an ISO Image supports more features than directly to Disc or Folder.

Correct Answer: C
QUESTION 96
How can you change a static DVD scene button to an animated button?
A. use the Flyout menu of the DVD Layout menu
B. import an animation sequence into the layer above the Timeline
C. double-click on the DVD scene marker on the Timeline and select the Motion Menu button
D. click on the Change Template button in the DVD Layout menu to find a menu that supports animated buttons
Correct Answer: C
QUESTION 97
What should you do to create a DVD menu?
A. choose DVD >Template > Apply
B. choose Template> Apply to Current Sequence
C. choose DVD markers from the DVD layout panel and choose Apply
D. choose Change Template from the DVD Layout panel and select a menu
Correct Answer: D
QUESTION 98
What happens when you double-click a text label on a DVD Layout?
A. You are able to assign links to the text.
B. The text opens in the Change Text dialog box.
C. The text color and font attributes may change.
D. The menu opens in the application designated as Edit Original.

Correct Answer: B QUESTION 99
Which statement about HDV editing in Premiere Pro is true?
A. HDV video must be converted before being captured.
B. HDV video may be captured via OHCI-compliant 1394 and edited in real time.
C. HDV video must be converted before being captured or exported back to tape.
D. HDV video may be captured via OHCI-compliant 1394 and can only be edited in real time with third-party plug-ins.

Correct Answer: B QUESTION 100
You want to capture video without audio by using the Capture panel. Where do you configure the settings to capture only video?
A. the General Preferences panel
B. the Logging tab on the Capture panel
C. the flyout menu on the Capture panel
D. the Device Control options in the Settings tab of the Capture panel

Correct Answer: C QUESTION 101
You want to record a sequence to videotape. Your device supports the RS-422 protocol. To accomplish this you go to the Preference files and choose _____ from the Device menu.
A. VTR Control
B. DV Deck Control
C. IEEE 1394 Control
D. Serial Device Control

Correct Answer: D QUESTION 102
What is the function of batch capture?
A. recaptures logged clips that are offline
B. captures multiple scenes simultaneously
C. detects scene changes for automated capture
D. applies filters to clips in batch as they are captured

Correct Answer: A QUESTION 103
Empty areas in an Adobe Illustrator file are converted to _____ when imported into Adobe Premiere Pro.
A. an alpha channel
B. a vector based mask
C. a solid colored background
D. an antialiased cropped area Correct Answer: A
QUESTION 104
Click the Exhibit button.
In the exhibit, which value will change when you drag the outer edge of the Fast Color Corrector wheel clockwise?

A. Hue Angle
B. Balance Gain
C. Balance Angle
D. Balance Magnitude

Correct Answer: A
QUESTION 105
You want to add borders to the Iris Star transition. What should you do?
A. select the transition and add a border with the Lens Flare effect
B. select the transition and adjust its properties in the Effect Controls panel
C. create a star in the Titler, and apply the Track Matte Key effect to the clip
D. add two transitions, one larger than the other, and make the larger one a different color
Correct Answer: B
QUESTION 106
Click the Exhibit button.
The exhibit shows the Program Monitor for the selected clip. The motion path indicates that this animation is using _____ interpolation.

A. Spatial Linear
B. Spatial Bezier
C. Temporal Ease In
D. Temporal Ease Out

Correct Answer: B QUESTION 107
Which statement is true?
A. Single-sided transitions fade to and from black.
B. You CANNOT use single-sided transitions in Premiere Pro.
C. Single-sided transitions are only possible in tracks 2 and up.
D. Single-sided transitions fade to or from a transparent state.

Correct Answer: D QUESTION 108

Flydumps.com New Adobe 9A0-061 exam materials provided eliminates the tacky and laborious process of studying and memorization as it provides direct Adobe 9A0-061 questions and answers that will help you feel confident.

Adobe 9A0-061 Dump, The Best Adobe 9A0-061 Guide Provider Online Shop