350-401 Dumps 2023 Update | Overcome All The Difficulties Of The Exam

Pass4itSure 350-401 Dumps 2023

The Cisco CCNP 350-401 exam is a highly specialized exam with a large number of candidates competing. Competition is fierce and the 350-401 (ENCOR) exam requires adequate practice and preparation. Having said all this, the exam is not impossible to crack. With the right guidance, it can pass smoothly. For example, our latest update 350-401 dumps 2023 are here to help you overcome all the difficulties of the exam.

In this type of exam, the preparation must be strategic and well-planned. Pass4itSure 350-401 dumps https://www.pass4itsure.com/350-401.html is a good choice for your pass exam. Improve your knowledge and skills and better prepare for the exam by providing the latest study materials with 1044 exam questions.

What is the hardest thing about the 350-401 exam?

The possible factors that make the exam the hardest vary for different people. Some common factors include:

Time pressure: The Cisco CCNP 350-401 exam has a time limit and requires all questions to be completed within the allotted 120 minutes. For some people, time constraints can cause them to feel stressed and anxious, which can affect their performance.

Question Difficulty: Some of the questions on the 350-401 exam is very complex or involve abstract concepts that may require specific skills, knowledge, or experience to solve, which can be difficult for some people.

Nervousness and anxiety: The exam itself is a high-pressure environment, and even with good preparation, some people tend to feel nervous and anxious, which can affect their performance and thinking ability.

Lack of self-confidence: Some people may lack self-confidence and feel that they are not equipped enough to cope with the challenges of the 350-401 exam, which can also make it difficult for them.

In short, the most difficult factors of the exam vary from person to person and need to be analyzed and solved according to individual circumstances.

But it’s probably a few points outlined above, don’t worry, these can be solved.

The latest 350-401 dumps 2023 help overcome all the difficulties of the exam

The latest 350-401 dumps 2023, especially those provided by Pass4itSure, contain all 350-401 exam question types, which are difficult and easy, allowing you to fully understand the content of the exam, promote the understanding of knowledge, and master the difficult points. By practicing the exam questions, you will no longer be nervous and anxious, and face the final exam with more confidence.

Requires practice and thorough preparation by 350-401 dumps 2023

Do not fight unprepared battles. The highly competitive 350-401 (ENCOR) exam requires adequate practice and preparation. So, here is specially prepared for you to practice the latest exam part of the 350-401 dumps questions 2023 online, provided by Pass4itSure for free.

last update 350-401 dumps questionstime
free 350-401 questionsSeptember 28, 2022
Question 1:

A client on different floors in an atrium. The access points are joined to the same controller and configured in local mode. The access points are in different AP groups and have different IP addresses, but the client VLAN in the groups is the same.

What type of roam occurs?

A. inter-controller

B. inter-subnet

C. intra-VLAN

D. intra-controller

Correct Answer: D

Mobility, or roaming, is a wireless LAN client\’s ability to maintain its association seamlessly from one access point to another securely and with as little latency as possible. Three popular types of client roaming are:

1.

Intra-Controller Roaming: Each controller supports same-controller client roaming across access points managed by the same controller. This roaming is transparent to the client as the session is sustained, and the client continues using the same DHCP-assigned or client-assigned IP address.

2.

Inter-Controller Roaming: Multiple-controller deployments support client roaming across access points managed by controllers in the same mobility group and on the same subnet. This roaming is also transparent to the client because the session is sustained and a tunnel between controllers allows the client to continue using the same DHCP- or client-assigned IP address as long as the session remains active.

3.

Inter-Subnet Roaming: Multiple-controller deployments support client roaming across access points managed by controllers in the same mobility group on different subnets. This roaming is transparent to the client because the session is sustained and a tunnel between the controllers allows the client to continue using the same DHCP-assigned or client-assigned IP address as long as the session remains active.


Question 2:

Refer to the exhibit.

Update 350-401 exam questions 2

Communication between London and New York is down. Which command set must be applied to the NewYork switch to resolve the issue?

A. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode negotiate NewYork(config-if)#end NewYork#

B. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode on NewYork(config-if)#end NewYork#

C. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode passive NewYork(config-if)#end NewYork#

D. NewYork(config)#no interface po1 NewYork(config)#interface range fa0/1-2 NewYork(config-if)#channel-group 1 mode auto NewYork(config-if)#end NewYork#

Correct Answer: C


Question 3:
Update 350-401 exam questions 3

Which HTTP code must be returned to prevent the script from exiting?

A. 200

B. 201

C. 300

D. 301

Correct Answer: D


Question 4:

Which solution do laaS service providers use to extend a Layer 2 segment across a Layer 3 network?

A. VLAN

B. VTEP

C. VXLAN

D. VRF

Correct Answer: C


Question 5:

Refer to the exhibit.

import JSON from requests import get

Headers = { “Content-Type” : “application/yang-data+json”, “Accept” : “application/yang-data+json” }

Devices = open(“devices.txt”, “r”)

for Device in Devices.deadlines():Hostname, IP, Login, Pass = Device.strip().split(“,”)URL = f”https://{IP}/restconf/data/Cisco-IOS-XE-native:native”Creds = (Login, Pass)

Response = get(URL, auth = Creds, headers = Headers, verify = False)

How should the script be completed so that each device configuration is saved into a JSON-formatted file under the device name?

Update 350-401 exam questions 5

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: A


Question 6:

Which LISP component is required for a LISP site to communicate with a non-LISP site?

A. ETR

B. ITR

C. Proxy ETR

D. Proxy ITR

Correct Answer: C

ETR, (Egress) from internal to External ITR, (Internal) from External to Internal


Question 7:

When voice services are deployed over a wireless environment, which service must be disabled to ensure the quality of calls?

A. Aggressive load balancing

B. Dynamic transmit power control

C. Priority queuing

D. Fastlane

Correct Answer: A

To have a successful voice deployment with 792x phones, not only do you need a professional site survey, you also need to make sure that the controller and the switched network are properly configured for voice.

The controller has several settings for a proper voice configuration:

Aggressive Load Balancing should be disabled.

Reference: http://what-when-how.com/deploying-and-troubleshooting-cisco-wireless-lan-controllers/configuration-cisco-wireless-lan-controllers/


Question 8:

What is the result when an active route processor fails in a design that combines NSF with SSO?

A. An NSF-aware device immediately updates the standby route processor RIB without churning the network

B. The standby route processor temporarily forwards packets until route convergence is complete

C. An NSF-capable device immediately updates the standby route processor RIB without churning the network

D. The standby route processor immediately takes control and forwards packets along known routes

Correct Answer: D

Stateful Switchover Routers specifically designed for high availability include hardware redundancy, such as dual power supplies and route processors (RPs). An RP is responsible for learning the network topology and building the routing table (RIB).

An RP failure can trigger routing protocol adjacencies to reset, resulting in packet loss and network instability.

During an RP failure, it may be more desirable to hide the failure and allow the router to continue forwarding packets using the previously programmed CEF table entries rather than temporarily drop packets while waiting for the secondary RP to reestablish the routing protocol adjacencies and rebuild the forwarding table.

Stateful switchover (SSO) is a redundancy feature that allows a Cisco router with two RPs to synchronize router configuration and control plane state information.

The process of mirroring information between RPs is referred to as checkpointing. SSO-enabled routers always checkpoint line card operation and Layer 2 protocol states.

During a switchover, the standby RP immediately takes control and prevents basic problems such as interface link flaps. However, Layer 3 packet forwarding is disrupted without additional configuration.

The RP switchover triggers a routing protocol adjacency flap that clears the roundtable. When the routing table is cleared, the CEF entries are purged, and traffic is no longer routed until the network topology is relearned and the forwarding table is reprogrammed.

Enabling nonstop forwarding (NSF) or nonstop routing (NSR) high availability capabilities informs the router(s) to maintain the CEF entries for a short duration and continue forwarding packets through an RP failure until the control plane recovers.


Question 9:

Which statement describes the IP and MAC allocation requirements for virtual machines on type 1 hypervisors?

A. Each virtual machine requires a unique IP and MAC addresses to be able to reach other nodes.

B. Each virtual machine requires a unique IP address but shares the MAC address with the physical server.

C. Each virtual machine requires a unique IP address but shares the MAC address with the address of the physical server.

D. Each virtual machine requires a unique MAC address but shares the IP address with the physical server.

Correct Answer: A

A virtual machine (VM) is a software emulation of a physical server with an operating system. From an application\’s point of view, the VM provides the look and feel of a real physical server, including all its components, such as CPU, memory,

and network interface cards (NICs).

The virtualization software that creates VMs and performs the hardware abstraction that allows multiple VMs to run concurrently is known as a hypervisor. There are two types of hypervisors: type 1 and type 2 hypervisors. In type 1 hypervisor

(or native hypervisor), the hypervisor is installed directly on the physical server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are

more efficient than hosted architectures. Some examples of type 1 hypervisors are VMware vSphere/ESXi, Oracle VM Server, KVM, and Microsoft Hyper-V.

In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. answer \’Each virtual machine requires a unique IP and MAC addresses to be able to reach other nodes\’ big advantage of Type 2 hypervisors is that management console software is not required.

Examples of type 2 hypervisors are VMware Workstation (which can run on Windows, Mac, and Linux) or Microsoft Virtual PC (which only runs

on Windows).

Update 350-401 exam questions 9

Question 10:

DRAG DROP

An engineer plans to use Python to convert text files that contain device information to JSON Drag and drop the code snippets from the bottom onto the blanks in the code to construct the request. Not all options are used.

Select and Place:

Update 350-401 exam questions 10
Update 350-401 exam questions 10-2

Question 11:

Which HTTP status code is the correct response for a request with an incorrect password applied to a REST API session?

A. HTTP Status Code: 200

B. HTTP Status Code: 302

C. HTTP Status Code: 401

D. HTTP Status Code: 504

Correct Answer: C

Reference: https://developer.mozilla.org/en-US/docs/Web/HTTP/Status/401


Question 12:

What does Call Admission Control require the client to send in order to reserve the bandwidth?

A. SIP flow information

B. Wi-Fi multimedia

C. traffic specification

D. VoIP media session awareness

Correct Answer: C


Question 13:

An engineer measures the Wi-Fi coverage at a customer site. The RSSI values are recorded as follows:

Location A: -72 dBm Location B: -75 dBm Location C: -65 dBm Location D: -80 dBm

Which two statements does the engineer use to explain these values to the customer? (Choose two)

A. The signal strength at location B is 10 dB better than at location C

B. Location D has the strongest RF signal strength.

C. The signal strength at location C is too weak to support web surfing.

D. The RF signal strength at location B is 50% weaker than at location A

E. The RF signal strength at location C is 10 times stronger than at location B

Correct Answer: DE


Question 14:

What happens to the signal strength of an RF signal due to wave spreading?

A. The signal strength of the RF signal will fall off equally near the transmitter and also farther away

B. The signal strength of the RF signal will fall off quickly near the transmitter but more slowly farther away

C. The signal strength of the RF signal will fall off slowly near the receiver and more quickly farther away

D. The signal strength of the RF signal will fall off slowly near the transmitter but more quickly farther away

Correct Answer: B


Question 15:

Refer to the exhibit.

Update 350-401 exam questions 15

Which command set must be added to the configuration to analyze 50 packets out of every 100?

A. sampler SAMPLER-1 mode random 1-out-of 2 flow FLOW-MONITOR-1

Interface GigabitEthernet 0/0/0 ip flow monitor SAMPLER-1 input

B. sampler SAMPLER-1 no mode random 1-out-of 2 mode percent 50 interface GigabitEthernet 0/0/0 ip flow monitor FLOW-MONITOR-1 sampler SAMPLER-1 input

C. interface GigabitEthernet 0/0/0 ip flow monitor FLOW-MONITOR-1 sampler SAMPLER-1 input

D. flow monitor FLOW-MONITOR-1 record v4_r1 sampler SAMPLER-1 interface GigabitEthernet 0/0/0

ip flow monitor FLOW-MONITOR-1 sampler SAMPLER-1 input

Correct Answer: C

Everything is complete and configured correctly, we just have to apply it on an interface.


Preparing for the 350-401 exam is not easy. It requires commitment and practice, regularity, and sincerity. For more assistance with the Pass4itSure 350-401 dumps, click here to get 350-401 dumps https://www.pass4itsure.com/350-401.html More exam questions to overcome difficulties and earn certificates.

Continue Reading

350-401 Dumps (r 9.27) Brand-New 350-401 ECOR Exam Preparation Materials

Use our 350-401 dumps (r 9.27) to prepare for the Cisco CCNP 350-401 exam. Our new 350-401 dumps (r 9.27) contains 866 practice questions and answers to ensure you’re ready.

Pass4itSure 350-401 dumps (r 9.27) best 350-401 ECOR exam preparation materials. Go to the webpage for a 350-401 dumps: https://www.pass4itsure.com/350-401.html (latest).

Need to know the basics of the 350-401 exam?

350-401 ECOR Preparation Materials

To pass the 350-401 exam, understanding the basics of the exam is the first step. Therefore, it is necessary.

The 350-401 exam is also known as the 350-401 ENCOR. It requires you to answer 100 ± questions in two hours and get 750-850 out of 1000 points to pass. It costs $400 to take the exam.

Passing the 350-401 exam is closely linked to the following certifications:

  • CCNP Enterprise (CCNP Enterprise Core Exam)
  • CCIE Enterprise Infrastructure (CCIE Enterprise Infrastructure Qualifying Exam)
  • CCIE Enterprise Wireless (CCIE Enterprise Wireless Qualifying Exam)

How do I prepare for the Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) exam?

Pass the 350-401 exam, how to prepare is important. You can use Pass4itSure 350-401 dumps (r 9.27) to prepare for the exam. It has the latest 350-401 exam practice questions that will help you win exams easily.

What are the learning resources for the Cisco 350-401 exam?

  • Implementing Cisco Enterprise Network Core Technologies (ENCOR)
  • ENCOR training videos
  • ENCOR study materials

……

There are more, welcome to add.

Where are the free valid 350-401 ECOR exam preparation materials?

This blog provides you with free Cisco 350-401 ECOR exam preparation materials.

You can download the free 350-401 exam question: https://drive.google.com/file/d/1tkPwTavFjjXlt4gzLWBvpvUf9auk-Xlu/view?usp=sharing at [google drive].

Or read the online 350-401 exam questions directly below.

Cisco 350-401 Free Dumps: New 350-401 ENCOR Questions Test:

NEW QUESTION 1

What is the API keys option for REST API authentication?

A. a predetermined string that is passed from client to server
B. a one-time encrypted token
C. a username that is stored in the local router database
D. a credential that is transmitted unencrypted

Correct Answer: A

In REST API Security – API keys are widely used in the industry and became some sort of standard, however, this
the method should not be considered a good security measure.

API Keys were created as somewhat of a fix to the early authentication issues of HTTP Basic Authentication and other
such systems. In this method, a unique generated value is assigned to each first-time user, signifying that the user is
known. When the user attempts to re-enter the system, their unique key (sometimes generated from their hardware
combination and IP data, and other times randomly generated by the server which knows them) is used to prove that
they’re the same user as before.

Reference: https://blog.restcase.com/4-most-used-rest-api-authentication-methods/

NEW QUESTION 2

Refer to the exhibit.



An engineer has configured an IP SLA for UDP echo\\’s. Which command is needed to start the IP SLA to test every 30
seconds and continue until stopped?

A. IP SLA schedule 100 start-time now life forever
B. IP SLA schedule 30 start-time now life forever
C. IP SLA schedule 100 start-time now life 30
D. IP SLA schedule 100 life forever

Correct Answer: A

NEW QUESTION 3

In a Cisco SD-Access solution, which protocol is used by an extended node to connect to a single edge node?

A. VXLAN
B. IS-IS
C. 802 1Q
D. CTS

Correct Answer: C

SD-Access Extended Nodes provide the ability to extend the enterprise network by providing connectivity to non-carpeted spaces of an enterprise – commonly called the Extended Enterprise. This allows network connectivity and management of IoT devices and the deployment of traditional enterprise end devices in outdoor and non-carpeted environments such as distribution centers, warehouses, or Campus parking lots.

This feature extends consistent, policy-based automation to Cisco Industrial Ethernet, Catalyst 3560-CX Compact, and
Digital Building Series switches and enables segmentation for user endpoints and IoT devices connected to these
nodes.

Using Cisco DNA Center automation, switches in the extended node role are onboarded to their connected edge node
using an 802.1Q trunk over an EtherChannel with one or multiple physical link members. Extended nodes are
discovered using zero-touch Plug-and-Play.

Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-designguide.html#Network_Components

NEW QUESTION 4

How does a fabric AP fit in the network?

A. It is in local mode and must be connected directly to the fabric border node
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node
D. It is in local mode and must be connected directly to the fabric edge switch.

Correct Answer: D

NEW QUESTION 5

Refer to the exhibit.

During deployment, a network engineer notices that voice traffic is not being tagged correctly as it traverses the
network. Which COS to the DSCP map must be modified to ensure that voice traffic is treated properly?

A. COS of 5 to DSCP 46
B. COS of 7 to DSCP 48
C. COS of 6 to DSCP 46
D. COS of 3 to DSCP of 26

Correct Answer: A

NEW QUESTION 6

An engineer must configure a router to leak routes between two VRFs Which configuration must the engineer apply?

A. IP access-list extended ACL-to-red permit IP any 10.1.1.0 0.0.0.255 route-map rm-to-red permit 10 match IP address 50
IP vrf RED rd 1:1 import ipv4 unicast map rm-to-red
B. IP access-list extended ACL-to-red permit IP 10.1.1.0 0.0.0.255 any route-map rm-to-red permit 10 match IP address
ACL-to-red ip vrf RED rd 1:1 import ipv4 unicast route-map ACL-to-red
C. IP access-list extended ACL-to-red permit IP 10.1.1.0 0.0.0.256 any route-map rm-to-red permit 10 match IP address
ACL-to-red ip vrf RED rd 1:1 import ipv4 unicast map rm-to-red
D. IP access-list extended ACL-to-red permit IP 10.1.1.0 0.0.0.265 any route-map rm-to-red permit 10 match IP address acl-to-red IP vrf RED rd 1:1 import ipv4 unicast ACL-to-red

Correct Answer: D

NEW QUESTION 7

Which two statements about AAA authentication are true? (Choose two)

A. RADIUS authentication queries the router`s local username database
B. TACACS+ authentication uses an RSA server to authenticate users
C. Local user names are case-insensitive
D. Local authentication is maintained on the router
E. KRB5 authentication disables user access when an incorrect password is entered

Correct Answer: DE

NEW QUESTION 8

An engineer measures the Wi-Fi coverage at a customer site. The RSSI values are recorded as follows:
Location A: -72 dBm Location B: -75 dBm Location C: -65 dBm Location D: -80 dBm
Which two statements does the engineer use to explain these values to the customer? (Choose two)

A. The signal strength at location B is 10 dB better than at location C
B. Location D has the strongest RF signal strength.
C. The signal strength at location C is too weak to support web surfing.
D. The RF signal strength at location B is 50% weaker than at location A
E. The RF signal strength at location C is 10 times stronger than at location B

Correct Answer: DE

NEW QUESTION 9

Refer to the exhibit.

Which password allows access to line con 0 for a username of “Tommy” under normal operation?

A. Cisco
B. local
C. 0 Cisco
D. Tommy

Correct Answer: A

In this question, there are two different passwords for user “Tommy”:
+
In the TACACS+ server, the password is “Tommy”
+
In the local database of the router, the password is “Cisco”.
From the line “login authentication local” we know that the router uses the local database for authentication so the
password should be “Cisco”.
Note: “… password 0 …” here means unencrypted password.

NEW QUESTION 10

In a fabric-enabled wireless network, which device is responsible for maintaining the endpoint ID database?

A. fabric border node
B. fabric edge node
C. fabric wireless controller
D. control plane node

Correct Answer: D

NEW QUESTION 11

A network engineer configures a new GRE tunnel and enters the show run command. What does the output verify?

A. The tunnel will be established and work as expected
B. The tunnel destination will be known via the tunnel interface
C. The tunnel keepalive is configured incorrectly because they must match on both sites
D. The default MTU of the tunnel interface is 1500 bytes.

Correct Answer: B

NEW QUESTION 12

DRAG DROP
Drag and drop the wireless elements on the left to their definitions on the right.

NEW QUESTION 13

In a Cisco SD-Access wireless architecture, which device manages endpoint ID to Edge Node bindings?

A. fabric control plane node
B. fabric wireless controller
C. fabric border node
D. fabric edge node.

Correct Answer: A

SD-Access Wireless Architecture Control Plane Node Closer Look Fabric Control-Plane Node is based on a LISP Map
Server / Resolver Runs the LISP Endpoint ID Database to provide overlay reachability information
+
A simple Host Database, that tracks Endpoint ID to Edge Node bindings (RLOCs)
+
Host Database supports multiple types of Endpoint ID (EID), such as IPv4 /32, IPv6 /128*, or MAC/48
+
Receives prefix registrations from Edge Nodes for wired clients and from Fabric mode WLCs for wireless clients
+
Resolves lookup requests from FE to locate Endpoints
+
Updates Fabric Edge nodes, Border nodes with wireless client mobility, and RLOC information

Reference: https://www.ciscolive.com/c/dam/r/ciscolive/latam/docs/2018/pdf/BRKEWN-2020.pdf

Using the latest 350-401 dumps (r 9.27): https://www.pass4itsure.com/350-401.html makes it easy for you to pass the 350-401 exam.

Continue Reading