Pass4itsure has more than 10 years experience in IT certification Cisco 300-320 dumps exam training, including questions and answers. Pass4itsure latest updated CCDP ARCH v3.0 300–320 dumps pdf questions and answers free download for Cisco Network Service Architectures.
Exam Code: 300-320
Exam Name: Designing Cisco Network Service Architectures
Updated: Aug 11, 2017
Q&As: 389
[2017 New Updated Cisco 300-320 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWck1GZWpsWHY4ZU0
[2017 New Updated Microsoft 70-486 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWSG9tSWFYaFZMREE
On the Internet, you can find a variety of Cisco 300-320 dumps training tools.
Pass4itsure Latest and Most Accurate Cisco 300-320 Dumps Exam Q&As:
QUESTION 1
When limit-learning is configured on a port and the limit is reached the following traffic still flows to the port.
A. Packets destined for the active Mac addresses
B. Broadcast traffic
C. EDP traffic
D. All of the above
300-320 exam Correct Answer: D
QUESTION 2
Extreme ware 7.0 supports both level1 and level 2 IS-IS routers.
A. TRUE
B. FALSE
Correct Answer: A
QUESTION 3
The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP and OSI) routers.
A. True
B. False
300-320 dumps Correct Answer: A
QUESTION 4
In OSPF, the router type that is required to connect an area with another area is the
A. Designated Router
B. Back-up Designated Router
C. ASBR
D. ABR
Correct Answer: D
QUESTION 5
EAPS protection switching is similar to what can be achieved with the Spanning Tree Protocol but one of
the big advantages of EAPS is
A. EAPS also supports star topologies
B. EAPS has a recovery time of less than a second in case of link failure.
C. An EAPS domain supports multiple root bridges, thus alternative path
D. EAPS eliminates the need for protocols like ESRP or VRRP that bring defaultgateway redundancy.
300-320 pdf Correct Answer: B
QUESTION 6
On a RADIUS server you can distinguish between switch access and Netlogin authentication. Extreme
provides a vendor specific attribute ExtremeExtreme-Netlogin-only =disabled/enabled.
User authentication for both Netlogin and switch access is allowed when the value is disabled.
When the value enabled user authentication is restricted to Netlogin only.
A. True
B. False
Correct Answer: A
QUESTION 7
The following modes of operation are supported with the Network login feature.
(choose all that apply)
A. Secure mode
B. Campus mode
C. Quick Mode
D. ISP mode
300-320 vce Correct Answer: ABCD
QUESTION 8
An LSP is a link state packet used by which routing protocol?
A. OSPF
B. RIP
C. BGP
D. None of these
Correct Answer: D
QUESTION 9
It is possible to set an STP-threshold to switch from a shared tree to a shortest path tree. This switch over
will be initiated by
A. The Rendezvous Point
B. The Bootstrap Router
C. A last hop router
D. The router nearest to the source
300-320 exam Correct Answer: C
QUESTION 10
Exhibit
According to accompanying diagram and ACL configuration it is possible for Host A (10.10.10.100) and
Host C (30.30.30.100) to successfully communicate.
A. TRUE
B. FALSE
Correct Answer: A
QUESTION 11
The maximum number of EAPS domains supported per switch and ring is?
A. 64
B. 32
C. 16
D. 8
300-320 dumps Correct Answer: A
QUESTION 12
In Extreme Ware, which one of the following is an optional ESRP configuration that allows you to connect
active hosts directly to an ESRP master or standby switch.
A. ESRP Groups
B. ESRP Domain
C. ESRP Host Attach
D. None of these
Correct Answer: C
QUESTION 13
Which CLI command configures DVMRP on all IP multicast interfaces.
A. config dvmrp add vlan all
B. config dvmrp add all
C. enable dvmrp
D. enable dvmrp vlan all
300-320 pdf Correct Answer: A
QUESTION 14
The following CLI command is valid to advertise SLB virtual servers in OSPF ith a cost of 10.
Enable ospf export vip cost 10
A. True
B. False
Correct Answer: A
QUESTION 15
According to accompanying diagram and ACL configuration it is possible to telnet from host A to any of the
switch IP addresses.
A. True
B. False
300-320 vce Correct Answer: B
QUESTION 16
Extreme Networks IS? Chipset switches allows you to run simultaneously the Radius and Tacacs
+features.
A. True
B. False
Correct Answer: B
QUESTION 17
OSPF requires that all areas attach directly to the backbone area, and that all attachments are made with
a direct physical connection.
A. True
B. False
300-320 exam Correct Answer: B
QUESTION 18
An Ethernet Automatic Protection Switching (EAPS) domain relies on a control VLAN.
The ports in that control VLAN ports must be tagged, and participating in the ring only.
A. True
B. False
Correct Answer: A
QUESTION 19
In SLB, Port Translation Mode is similar to Translation Mode,except that in Port Translation Mode the
physical Port where the node connects to must be configured as a Fast Ethernet Half Duplex port.
A. True
B. False
300-320 dumps Correct Answer: B
QUESTION 20
In PIM sparse mode the Bootstrap Router election is based on the highest IP address.
A. True
B. False
Correct Answer: B
QUESTION 21
ESRP-enabled switches can utilize either an IP address or an IPX net ID for their protected VLANs.
A. TRUE
B. FALSE
300-320 pdf Correct Answer: A
QUESTION 22
An IP-only IS-IS router (or “IP-only” router) is defined to be
A. A router which uses IS-IS as the routing protocol for IP
B. Does not otherwise support OSI protocols
C. One of the IS-IS router types
D. All of the above
Correct Answer: D
QUESTION 23
On an Extreme Networks switch, how many bits comprise an OSPF area ID?
A. 32 BITS
B. 48 BITS
C. 64 BITS
D. 128 BITS
300-320 vce Correct Answer: A
QUESTION 24
What is the RP-set?
A. It is the information of which RP are available for what Multicast groups.It is send by the BSR towards
all PIM routers
B. It is the information of which multicast groups are activeIt is send by the RP towards all PIM routers
C. It is the information of which BSR are available for what Multicast groups.It is send by RP towards all
PIM routers
D. It is the information, stored by all RP, needed to find the BSR,
Correct Answer: A
QUESTION 25
The majority of Extreme Networks switches have a dedicated out of band management port and VLAN.
The 10/100BASE-TX Ethernet management port allows you to communicate directly to the CPU of the
switch. If you want the switch to forward traffic from the mgmt VLAN to other VLANS you just have to
enable ipforwarding on all VLANS including the management VLAN.
A. TRUE
B. FALSE
300-320 exam Correct Answer: B
QUESTION 26
Which of the following statements fit the description of PIM sparse mode? (choose three that apply)
A. PIM sparse mode is suitable for network with minimal multicast deployment.
B. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
C. In PIM sparse mode the RPF check depends on the tree type
D. An explicit join is not required in PIM sparse mode.
Correct Answer: ABCD
QUESTION 27
How many bits in the IP TOS field does a Summit 48i examine?
A. 4
B. 6
C. 8
D. 16
300-320 dumps Correct Answer: B
QUESTION 28
What is the CLI command you would use to configure a VLAN to be protected by ESRP?
A. enable esrp vlan <vlan>
B. enable esrp vlan <vlan> detail
C. config esrp vlan <vlan>
D. config esrp vlan <vlan> detail
Correct Answer: A
QUESTION 29
Correct Answer:
Pass4itsure Cisco CCDP 300-320 dumps is the best training materials. We offer the most comprehensive verification questions and answers, you can also get a year of free updates.If your budget is limited, but you need complete Pass4itsure https://www.pass4itsure.com/300-320.html dumps exam material.