3COM, 3Com Certification

3Com 3M0-331 Cert, Download 3Com 3M0-331 Exam Dumps For Sale

No Comments

Where to free download the new 3Com 3M0-331 exam questions to pass the exam easily? Now,Flydumps has publised the new version of 3Com 3M0-331 exam dumps with new added exam questions.you can also get free VCE and PDF, and the new 3Com 3M0-331 practice tests ensure your exam 100% pass. Visit Flydumps.com to get the 100% pass ensure!

QUESTION 52
Which three are features of IP Security (IPSec)? (Choose three.)
A. Is a Layer 2 Virtual Private network (VPN) protocol
B. Is a Layer 3 Virtual Private network (VPN) protocol
C. Can transport IP, IPX, AppleTalk and other protocols
D. Supports two security modes: tunneling and transport mode
E. Requires Point-to-Point Protocol (PPP) as a transport protocol
F. Consists of three protocols: Authentication Header, Encapsulation Security Payload, and Internet Key Exchange

Correct Answer: BDF
QUESTION 53
What protocol does a network host use to communicate with a router to join a multicast group?
A. MBONE
B. Internet Group Management Protocol (IGMP)
C. Distance-Vector Multicast Protocol (DVRMP)
D. An IP packet with a physical address of zero (0)
E. Protocol Independent Multicast-Dense Mode (PIM-DM)

Correct Answer: B
QUESTION 54
When there are multiple IGMP-enabled routers connected to an IP subnet, which router will become the IGMP querier (IGMP-designated router)?
A. The router with the lowest Router ID
B. The router with the highest Router ID
C. The router with the lowest IP address
D. The router with the highest IP address
E. The router with the least cost route to the Internet

Correct Answer: C
QUESTION 55
What does a PIM Dense Mode-enabled router send to inform an upstream router that one of its downstream clients wants to join a multicast group?
A. IGMP query
B. Hello packet
C. Join message
D. Graft message
E. Membership report
Correct Answer: D
QUESTION 56
Which three protocols are used for creating Virtual Private Networks (VPNs)? (Choose three.)
A. IP Security (IPSec)
B. Dynamic Security Link
C. Layer 2 Tunneling Protocol (L2TP)
D. Network Address Translation (NAT)
E. Generic Routing Encapsulation (GRE)
F. Challenge Handshake Authentication Protocol (CHAP)
Correct Answer: ACE QUESTION 57
Which type of ACL must be used to define a rule for an Ethernet protocol type?
A. A basic ACL
B. An advanced ACL
C. A vlan-based ACL
D. A mac-based ACL
E. An interface-based ACL

Correct Answer: D
QUESTION 58
Which is the default match order used for ACL rules?
A. auto
B. LIFO
C. config
D. longest match
E. determined by ?bits

Correct Answer: C
QUESTION 59
Which three are characteristics of access control lists (ACLs)? (Choose three.)
A. Standard ACLs use only the source/destination port to filter traffic
B. A standard ACL has a router identification number between 1 and 999
C. Wildcard mask can be used to define bits in an IP address for packet filtering
D. ACLs can be used to control data flow through a router for Quality of Service (QoS)
E. Extended access control lists (EACL) can use any information in an IP packet to filter data
F. ACLs can examine IP source/destination address, source/destination port, and MAC address

Correct Answer: CDF
QUESTION 60
What is the speed of a digital data service (DDS) operating at the digital signal level 0 (DS0)?
A. T1/E1
B. 2,400 bps
C. 56/64 kbps
D. 155 mbps
Correct Answer: C
QUESTION 61
Which three are Integrated Services Digital Network (ISDN) customer benefits? (Choose three.)
A. Fast call setup
B. Always-on service
C. Digital signal quality
D. Flexible and reliable service
E. Inexpensive compared to xDSL and cable modem services
Correct Answer: ACD
QUESTION 62
Choose three statements that correctly describe BGP. (Choose three.)
A. BGP is a link-state routing protocol
B. BGP is a distance-vector routing protocol
C. BGP is both an internal and an external routing protocol
D. BGP is explicitly designed to avoid the occurrence of routing loops
E. BGP is an internal routing protocol, designed to transmit routing information about an autonomous system within that system
F. BGP is an external routing protocol, designed to transmit routing information between autonomous systems about each other

Correct Answer: BDF
QUESTION 63
Which two statements are true of BGP peers? (Choose two.)
A. Wherever they are, BGP peers must be directly connected
B. Wherever they are, BGP peers do not have to be directly connected
C. Within an Autonomous System, BGP peers must be directly connected
D. Between Autonomous Systems, BGP peers must be directly connected
E. Within an Autonomous System, BGP peers do not have to be directly connected
F. Between Autonomous Systems, BGP peers do not have to be directly connected

Correct Answer: DE
QUESTION 64
Which three statements about the BGP MED attribute are true? (Choose three.)
A. It never propagates between Autonomous Systems
B. A router might receive two different MED values for one route
C. A router might advertise two different MED values for one route
D. It is used to discriminate between multiple routes to the same prefix
E. All else being equal, a router will choose a route with a lower MED value rather than a route with a higher MED value
Correct Answer: BDE
QUESTION 65
What is the primary purpose of the Designated Router (DR) when using Open Shortest Path First (OSPF)?
A. It backs up the Border Gateway Router when it fails
B. It calculates all Best Path Routes for all OSPF routers in its area
C. It updates all other routers within the same network with new or changed routes
D. It updates all other routers within all reachable networks with new or changed routes
Correct Answer: C
QUESTION 66
What is the maximum number of hops supported by Routing Information Protocol (RIP)?
A. 8
B. 15
C. 64
D. 128
E. 255

Correct Answer: B
QUESTION 67
Click the Exhibit button. Referring to the diagram, which three OSFP routers should receive a dr-priority of 0? (Choose three.)

A. RTA
B. RTB
C. RTC
D. RTD

Correct Answer: BCD
QUESTION 68
Which three roles can routers be assigned when using Open Shortest Path First (OSPF) routing protocol? (Choose three.)
A. Backbone router (BBR)
B. Internal-area router (IAR)
C. Area border router (ABR)
D. Wide-area border router (WBR)
E. Independent system router (ISR)
Correct Answer: ABC
QUESTION 69
What is the structure of all ATM cells?
A. 5 octets header 43 octets payload
B. 5 octets header, 48 octets payload
C. 2 octets source, 2 octets destination, 48 octets payload
D. 2 octets source, 2 octets destination, 43 octets payload

Correct Answer: B
QUESTION 70
How is an ATM connection identified?
A. Local VPI/VCI pair
B. Global VPI/VCI pair
C. Source and destination socket pair
D. Source and destination address pair

Correct Answer: A
QUESTION 71
Which is the correct ATM hierarchy?
A. Physical Paths contain Virtual Channels which contain Virtual Paths
B. Physical Paths contain Virtual Paths which contain Virtual Channels
C. Virtual Paths contain Virtual Channels, which contain Physical Paths
D. Virtual Channels contain Virtual Paths, which contain Physical Paths

Correct Answer: B
QUESTION 72
Which three are characteristics of a router? (Choose three.)
A. Forwards packets between networks
B. Connects only networks of similar types
C. Finds the best path from one network to another network
D. Works at Layer 4, the Transport Layer according to the OSI model
E. Connects networks into physically unified internetworks, with each network retaining its own identity
Correct Answer: ACE
QUESTION 73
The PPP LCP protocol is associated with which layer of the OSI model?
A. Session
B. Physical
C. Data Link
D. Transport
E. Presentation

Correct Answer: C
QUESTION 74
Which two are limitations of using High-Level Data Link Control (HDLC) protocol for point-to-point and point-to-multipoint links? (Choose two.)
A. HDLC provides no error checking or recovery
B. HDLC does not support multi-protocol transmissions
C. As an older protocol, HDLC does not operate on many new routers
D. HDLC can only be used on point-to-point links, as it does not have a destination address
E. Each router vendor’s implementation is slightly different, making interoperability a problem

Correct Answer: BE
QUESTION 75
Which three are characteristics of Point-to-Point (PPP) protocol? (Choose three.)
A. PPP is a Layer 2 Data Link protocol
B. PPP supports only asynchronous links
C. Options are available for providing authentication for security
D. PPP is less capable than Serial Line Internet Protocol (SLIP)
E. PPP is extensively used today, i.e., for modem dial-up connections to an Internet Service Provider (ISP)

Correct Answer: ACE
QUESTION 76
Which four are important considerations when planning a wide area network design? (Choose four.)
A. Current and planned throughput requirements
B. Proper WAN traffic management to prevent serious congestion
C. Detailed plan for reconfiguring the WAN when expansion is required
D. Disaster recovery plan that facilitates backing up key corporate data
E. Determining if and how backup links will be incorporated into the WAN design
F. What is required to provide customers and partners reasonable access to your Web site

Correct Answer: ABEF
QUESTION 77
Frame relay is associated with which layer of the OSI model?
A. Network
B. Session
C. Physical
D. Data link
E. Transport
Correct Answer: D
QUESTION 78
What OSI layer do routers operate at in the OSI model?
A. Session
B. Network
C. Physical
D. Data Link
E. Transport
F. Application
Correct Answer: B
QUESTION 79
What are the objectives of a good queue-scheduling scheme? (Choose three.)
A. Allocate bandwidth, taking priority into account
B. Distribute bandwidth unused by one queue to other queues
C. Stop a badly-behaved application affecting other applications
D. Assign packets to output interfaces, taking priority into account
E. Respond to changing patterns of network usage and congestion

Correct Answer: ABC
QUESTION 80
Which queuing mechanism is most often used with RSVP to implement IntServ QoS?
A. Fair Queuing
B. FIFO Queuing
C. Priority Queuing
D. Custom Queuing
E. Class Based Queuing
F. Weighted Fair Queuing

Correct Answer: F
QUESTION 81
Which pre-defined type of DiffServ Per-Hop Behaviors (PHBs) provides a premium service, with low loss, low latency, low jitter and guaranteed bandwidth?
A. Priority
B. Default
C. Class-Selector
D. Priority-Selector
E. Assured Forwarding
F. Expedited Forwarding
G. Enhanced Forwarding

Correct Answer: F
QUESTION 82
Which three statements are true for Traffic Policing? (Choose three.)
A. It is used to adjust the input rate
B. It is used to adjust the output rate
C. It may cause higher layers to resend
D. Non-complying traffic is always buffered
E. It may increase network delay for some packets
F. Non-complying traffic is always dropped or remarked

Correct Answer: ACF
QUESTION 83
When configuring Resource-Shared DCC, DCC parameters can be configured directly on a Dialer interface, but not on a Physical interface.
A. True
B. False

Correct Answer: A
QUESTION 84
When configuring Circular DCC, DCC parameters can be configured directly on a Physical interface, but not on a Dialer interface.
A. True
B. False

Correct Answer: B
QUESTION 85
Dialer Backup can be configured using Circular DCC, but not using Resource-Shared DCC
A. True
B. False

Correct Answer: A
QUESTION 86
What is the length of an MPLS label?
A. 16 bits
B. 20 bits
C. 24 bits
D. 32 bits
E. 40 bits

Correct Answer: A
QUESTION 87
During the creation of a Label Switched Path (LSP), which two statements most correctly describe the binding to an FEC? (Choose two.)
A. The binding is distributed from downstream to upstream
B. The binding is distributed from upstream to downstream
C. The label for each binding is assigned by the upstream LSR
D. The label for each binding is assigned by the downstream LSR

Correct Answer: AC
QUESTION 88
When an IP packet traverses an LSP through an MPLS domain, what happens to the Time to Live (TTL) field in the IP header?
A. It is completely unchanged
B. It is incremented by 1 each time it passes through an MPLS router
C. It is incremented by 1 by the MPLS egress router, since the entire MPLS domain is seen as one hop
D. It is incremented by 2 by the MPLS egress router, since the ingress and egress routers are the only IP routers in the LSP
E. It is changed by the MPLS egress router to the value it would have had if it had traversed the same sequence of routers using IP routing instead of label switching
Correct Answer: E
QUESTION 89
Which protocol CANNOT be monitored by ASPF on a 3Com 5000 or 6000 series router using V2.x code?
A. FTP
B. HTTP
C. H.323
D. SMTP
E. RSTP
F. SNMP

Correct Answer: F

PDF format– Printable version, print 3Com 3M0-331 exam dumps out and study anywhere.Software format– Simulation version, test yourself like 3Com 3M0-331 exam real test.Credit Guarantee– Passtcert never sell the useless 3Com 3M0-331 exam dumps out.You will receive our 3Com 3M0-331 exam dumps in time and get CCIE Certified easily.

Continue Reading

ACSA, Apple

Apple 9L0-623 Exams, Most Popular Apple 9L0-623 Answers Will Be More Popular

No Comments

Passed Apple 9L0-623 yesterday on first attempt only using the Exampass premium vce and one corrected answers.Thanks a lot for your valuable update reagding premium dump.It will definitely help me for preparing for the exam before to write.

QUESTION 20
As an Apple Certified System Administrator in Apple.com.Your company has two Mac OS X Server v10.6 computers as Software Update servers. You want the Software Update service on one computer to retrieve available software updates from the other, instead of both computers downloading updates from Apple’s public Software Update servers.What should you do?
A. You should edit the file /etc/swupd/swupd.conf
B. You should edit the file /etc/swupd/swupd.plist
C. You should edit the file /usr/share/swupd/html/index.sucatalog
D. You should edit the file /Library/Preferences/com.apple.SoftwareUpdate.plist
Correct Answer: B QUESTION 21
As an Apple Certified System Administrator in Apple.com .You are defining a workflow in Automator that will automate the creation of custom NetBoot service images. Which statement is true?
A. The workflow must use actions available in Automator’s System library.
B. Workflow creating NetInstall images can use The “Add User Account” action.
C. The results of one Automator action become the input to the next action in the workflow.
D. The workflow can branch based on the results of an action, causing just one of several defined actions to be performed next.

Correct Answer: C
QUESTION 22
As an Apple Certified System Administrator in Apple.com. What can you perform with an Apple Remote Desktop task server?
A. You can check the client information.
B. You can check the local network for ARD client computers.
C. You can arrange tasks for offline client computers.
D. You can turn on powered-down client computers using the Lights Out Management protocol. Answer: C

Correct Answer:
QUESTION 23
There is one folder named ~/Library/Preferences/ByHost/ on a Mac OS X v10.6 computer. Please point out what information is stored in it.
A. The computer’s hardware settings
B. The user preferences that are tied to specific computers
C. The computer’s license information
D. The access control lists specifying the local files to which network users have Read/Write access

Correct Answer: B
QUESTION 24
Your organization has 100 Intel iMac computers. You are creating a NetInstall image on a Mac OS X Server v10.6 computer. Which Automator action should you add if you want to specify that the finished image can be accessed only by a specific subset of your iMac computers?
A. Define Image Source
B. Filter Computer Models
C. Filter Clients by IP Address
D. Customize Package Selection
E. Filter Clients by MAC Address
F. Apply System Configuration Settings

Correct Answer: E
QUESTION 25
As an Apple Certified System Administrator in Apple.com.Your company has a Mac OS X Server v5 computer. Which process should you use to implement software updates to client computers?
A. You should swupd_syncd
B. You should swsvrd_updated
C. You should useupdated
D. You should use httpd-1.3
QUESTION 26
Which statement best defines the term “bundle” as it applies to the Mac OS X v10.6 file system?
A. A folder that is invisible in the Finder
B. A folder of files that the Finder displays as a single file
C. A folder of files that have been gathered and organized for deployment
D. A hierarchical directory structure containing an executable code and related resources

Correct Answer: D
QUESTION 27
Which command-line tool can display the ID of a specific installation package?
A. pkgs
B. pkgutil
C. swupdate
D. packagemaker

Correct Answer: B
QUESTION 28
In Mac OS X v10.6, which tool do you use to restore a multicasted image to a target volume?
A. asr
B. hdiutil
C. diskutil
D. Disk Utility
E. System Image Utility

Correct Answer: A
QUESTION 29
Your organization has 100 Intel iMac computers. You are creating a NetInstall image on a Mac OS X Server v10.6 computer. Which Automator action should you add if you want to specify that the finished image can be accessed only by a specific subset of your iMac computers?
A. Define Image Source
B. Filter Computer Models
C. Filter Clients by IP Address
D. Customize Package Selection
E. Filter Clients by MAC Address
F. Apply System Configuration Settings

Correct Answer: E
QUESTION 30
You are adding a RAID system to your IT infrastructure. The new RAID system will consume electricity at a maximum rate of 600 watts and will be connected to a 120 volt outlet. How many amperes of electric current must be supplied in order to power this RAID system?
A. 1.8 amps
B. 5 amps
C. 8 amps
D. 10 amps
QUESTION 31
You have created the disk image shown in the screenshot below. Which command can you enter in Terminal to convert this disk image into four files that will appear as a single volume when they are downloaded and opened on a Mac OS X computer?

A. hdiutil convert -o data_part -count 4data_files.dmg Sample Test Mac OS X Deployment 10.6 Exam
B. diskutil convert -o data_part -count 4 data_files.dmg
C. hdiutil segment -o data_part -segmentCount 4data_files.dmg
D. diskutil segment -o data_part -segmentCount 4data_files.dmg

Correct Answer: C
QUESTION 32
In Mac OS X, what extension follows DVD and CD master disk image names?
A. .dmg
B. .dvd
C. .cdr
D. .dcm
E. .img

Ensure that you are provided with only the best and most updated Apple 9L0-623 Certification training materials, we also want you to be able to access Apple 9L0-623 easily, whenever you want.We provide all our Apple 9L0-623 Certification exam training material in PDF format, which is a very common format found in all computers and gadgets. Now we add the latest Apple 9L0-623 content and to print and share content.

Continue Reading

Acpt, Apple

Apple 9L0-620 PDF Download, Sale Latest Release Apple 9L0-620 Actual Test Online Store

No Comments

Hi,I just took CCNA Apple 9L0-620 test and passed with a great score.All examcollection and securitytut dump are no longer valid anymore.I recommend studying Exampass Premium VCE.I can confirm that all Apple 9L0-620 new questions appear on my test. Keep up the good work and good luck!

QUESTION 50
Which is a valid storage location for the file named “openldap-withstatic.plist”?
A. /etc/openldap/templ/
B. /var/db/dslocal/Default/mappings/
C. /Library/Preferences/DirectoryService/
D. /Library/Application Support/Directory Access/LDAPv3/Templates/

Correct Answer: D QUESTION 51
Please point out which process on an Open Directory replica receives notification of changes to an Open Directory master?
A. repld
B. slapd
C. slurpd
D. slapcatd

Correct Answer: B QUESTION 52
Please point out which data is replicated from an Open Directory master to an Open Directory replica?
A. System keychain
B. Kerberos public keys
C. BSD directory domain
D. LDAP directory domain

Correct Answer: D QUESTION 53
By setting the authentication search policy in Directory Utility, you set the order in which different directory domains are searched for account records
A. TRUE
B. FALSE
Correct Answer: A QUESTION 54
By setting the authentication search policy in Directory Utility, you set authentication policies for user accounts, such as password length
A. TRUE
B. FALSE
Correct Answer: B QUESTION 55
By setting the authentication search policy in Directory Utility, you set the password hashes that are allowed for login window authentication
A. TRUE
B. FALSE
Correct Answer: B QUESTION 56
By setting the authentication search policy in Directory Utility, you set the order in which user certificates are searched for public key authentication methods
A. TRUE
B. FALSE

Correct Answer: B QUESTION 57
You want to promote a standalone Mac OS X Server v10.5 computer to an Open Directory master. If the server has the DNS name “mainserver.Real-Exams.net Company”, How to perform the promotion?
A. You should use the command slapconfig -promote mainserver.Real-Exams.net Company
B. You should use the command ldapconfig -a mainserver.Real-Exams.net Company -u diradmin -p password
C. You should use the command ldapconfig -createldapmaster dc=mainserver,dc=Real-Exams.net,dc=com MAINSERVER.Real-Exams.net Company
D. You should use the command slapconfig -createldapmasterandadmin diradmin ‘Directory Admin’ 1000 dc=mainserver,dc=Real-Exams.net,dc=com MAINSERVER.Real-Exams.net Company

Correct Answer: D QUESTION 58
When should you use dseditgroup rather than dscl?
A. When you need to edit the Directory ACLs for your groups.
B. When you need to edit both the local and network directory domains.
C. When you need a GUID to be created automatically for new group records.
D. When you need to edit groups that reside in an Active Directory directory domain.

Correct Answer: C QUESTION 59
What information you can find in a TGT from a KDC?
A. The public key for the KDC
B. The user account password
C. The service key for all kerberized services
D. The date and time that the TGT was issued

Correct Answer: D
QUESTION 60
Please point out what is a Kerberos user principal?
A. Kerberos user principal is an entry in the local Keychain database that contains the private keys for a particular Kerberos user
B. Kerberos user principal is an entry in the LDAP database that contains the identification information for a particular Kerberos user
C. Kerberos user principal is an entry in the KDC database that contains the authentication information for a particular Kerberos user
D. Kerberos user principal is an entry in the local Directory Services database that contains the identification information for a particular Kerberos user

Correct Answer: C
QUESTION 61
You configure one Mac OS X v10.5 client computer to search both an Open Directory server and an Active Directory server for user authentication information. How does Mac OS X on the client computer perform the search?
A. Mac OS X only searches the Open Directory server. If the user is not found there, the user is not authenticated.
B. Mac OS X searches the Open Directory server first. If the user is not found there, Mac OS X searches the Active Directory server.
C. Mac OS X searches the directory that is listed first in the search path. If the user is not found there, the user is not authenticated.
D. Mac OS X searches the directory that is listed first in the search path. If the user is not found there, Mac OS X searches the next directory in the search path.

Correct Answer: D
QUESTION 62
You want to use a third-party LDAP server to support your Mac OS X v10.5 client computers, but the LDAP server needs additional data in order to do so. What are THREE ways to provide the missing data?
A. You should enter the missing data on the client computers as a schema addition in /etc/openldap.
B. You should enter the missing data on the client computers as static attribute values using the LDAP plug-in.
C. You should enter the missing data on the LDAP server in value fields of unused attributes that have compatible value types.
D. You should modify the directory schema on the third-party LDAP server, and enter the missing data in the new attributes in the schema.

Correct Answer: BCD
QUESTION 63
You use Directory Utility to bind a Mac OS X v10.5 client computer to an Active Directory server. What role does the client’s computer ID, “Mac1”, play in the binding process?
A. The client computer edits the AllowedClients attribute to include the value “Mac1”.
B. The client computer creates a computer record named “Mac1” in the Active Directory service.
C. The client computer uses the value of the KerberosPrincipal property inside a computer record called “Mac1” for SMB authentication.
D. The client computer checks the attributes of the AllowedClients record to verify that “Mac1” is allowed to bind to the Active Directory domain.

Correct Answer: B
QUESTION 64
You have configured a Mac OS X v10.5 computer for trusted binding to an Open Directory master. Which step takes place as part of the trusted binding process?
A. A computer record for the client is created on the Open Directory master.
B. User principals are downloaded from the Open Directory master to the client for the local KDC.
C. The search path order is downloaded from the Open Directory master to the client, and configured on the client.
D. SSL certificates are downloaded from the Open Directory master to the client to establish an encrypted connection.

Correct Answer: A
QUESTION 65
Which of the following statement exactly describe the architecture of an Open Directory replica system in Mac OS X Server v10.5?
A. An Open Directory master can have 64 replicas. Replicas cannot replicate other replicas.
B. An Open Directory master can have 1024 replicas. Replicas cannot replicate other replicas.
C. An Open Directory master can have 32 replicas, and each replica can have another 32 replicas.
D. An Open Directory master can have 64 replicas, and each replica can have another 64 replicas.

Correct Answer: C
QUESTION 66
You use the Server Admin to configure a Mac OS X Server v10.5 computer located at server.Real-Exams.net Company to provide directory information via LDAP. What is the default search base?
A. ou=server,o=Real-Exams.net,o=com
B. ou=server,ou=Real-Exams.net,ou=com
C. dc=server,dc=Real-Exams.net,dc=com
D. ou=server,dc=Real-Exams.net,dc=com

Correct Answer: C
QUESTION 67
A network user account named “Mike” is stored on an LDAP server. On a Mac OS X client computer whose computer name is “Mac1”, a user enters valid authentication information for the network account, but the login fails. From another Mac OS X client computer, “Mac2”, logging in with the same authentication information succeeds. What might be causing the problem on Mac1?
A. lookupd has quit on Mac1.
B. Mac1 does not have the LDAP schema extensions installed.
C. The user account’s password hash is not supported on Mac1.
D. Another account named “Mike” with a different password is stored in the local directory domain of Mac1.
Correct Answer: D
QUESTION 68
How to view cached Kerberos service tickets?
A. You should use the command-line tool kinit
B. You should use the command-line tool klist
C. You should use the command-line tool ktutil
D. You should use the command-line tool kadmin

Correct Answer: B
QUESTION 69
How to create a new user in the /BSD/local directory domain on a Mac OS X v10.5 computer?
A. You should use the tool dscl
B. You should use the tool vipw
C. You should use the tool dsaddusr
D. You should use the tool Workgroup Manager

Correct Answer: B
QUESTION 70
You set up an Open Directory master and a replica, and verified that both are available on the network. How do you configure a Mac OS X v10.5 client computer to bind to the current Open Directory master, and to look for the replica if the master becomes unavailable?
A. You should configure the Open Directory master to specify the replica address using managed client settings. Then bind the client to the Open Directory master with Directory Utility.
B. You should bind the client to the Open Directory master. The binding process will provide the client with the address of the replica that the client will use if it cannot contact the master.
C. You should configure the Open Directory master to specify the replica address using managed client settings. Allow the master and replica to sync at least once, and then bind the client to the Open Directory replica.
D. You should bind the client to the Open Directory replica. The binding process will provide the client with the address of the master, and the client will automatically look for the master before looking for the replica.

Correct Answer: B
QUESTION 71
What is the main difference between ldapmodify and slapadd?
A. slapadd can import LDIF files, but ldapmodify cannot.
B. ldapmodify can import LDIF files, but slapadd cannot.
C. slapadd can safely add records while the slapd daemon is running, but ldapmodify cannot.
D. ldapmodify can safely add records while the slapd daemon is running, but slapadd cannot.

Correct Answer: D
QUESTION 72
You are configuring your Mac OS X v10.5 client computers to access a third-party directory. You want to provide the client computers with mount records, without modifying the schema on the third-party directory. What should you do?
A. You should use Directory Utility to map VFSType to apple-user-homeurl on each client computer.
B. You should use the Active Directory schema rather than the RFC 2307 schema on the LDAP directory.
C. You should use Workgroup Manager to connect directly to the LDAP directory and create mount records.
D. You should supplement the third-party directory with a directory on Mac OS X Server to host the mount records.
Correct Answer: D QUESTION 73
Windows PDC allows Windows computers to use a network user account for logins.
A. TRUE
B. FALSE
Correct Answer: A QUESTION 74
Windows PDC provides Windows user account information to Open Directory replicas.
A. TRUE
B. FALSE
Correct Answer: B QUESTION 75
Windows PDC provides managed client settings to Macintosh clients bound to an Active Directory server.
A. TRUE
B. FALSE
Correct Answer: B QUESTION 76
Windows PDC provides authentication for a Mac OS X Server computer bound to an Active Directory server.
A. TRUE
B. FALSE

Correct Answer: B QUESTION 77
You create an LDAP configuration in Directory Access that maps the local UniqueID attribute to #3600. What will happen after that?
A. All user accounts provided by that LDAP configuration will have a UniqueID of 3600.
B. The directory server will only find and return user accounts that contain a UniqueID that ends in 3600.
C. The UniqueID and GeneratedUID values for user accounts provided by that LDAP configuration on that computer will be synchronized hourly.
D. Each new user account created on that computer is assigned a UniqueID value, starting at 3600, and incrementing the UniqueID value by 1 for each subsequent new account.

Correct Answer: A QUESTION 78
You want to add a third-party FTP server to the Kerberos realm hosted on your Open Directory master. Which TWO steps are required to accomplish your goal?
A. You should add a user principal to the keytab file on the FTP server.
B. You should add a service principal to the keytab file on the FTP server.
C. You should edit the user principals on the Open Directory master to support FTP.
D. You should add a service principal for the FTP service to the KDC on the Open Directory master.

Correct Answer: BD QUESTION 79
Please describe Kerberos keytab file contains secret keys for________.
A. user principal
B. KDC principal
C. client principal
D. service principal

Correct Answer: D QUESTION 80
You can use slapconfig to promote a Mac OS X Server computer to an Open Directory master
A. TRUE
B. FALSE
Correct Answer: A QUESTION 81
You can use slapconfig to edit the LDAP schema on a Mac OS X Server computer
A. TRUE
B. FALSE
Correct Answer: B QUESTION 82
You can use slapconfig to bind a Mac OS X computer to an Active Directory server
A. TRUE
B. FALSE
Correct Answer: B QUESTION 83
You can use slapconfig to configure LDAP record mapping on a Mac OS X computer
A. TRUE
B. FALSE

Correct Answer: B QUESTION 84
How should you configure a Mac OS X v10.5 client computer to require packet signing when it accesses an Active Directory server?
A. You should select “Digitally sign all packets” in Directory Utility.
B. You should enter the command dsconfigad -packetsign require in Terminal.
C. You should enable “Require Active Directory packet signing” in the Kerberos preferences.
D. You should enter the command dscl localhost -create /Config/ADPacketSign require in Terminal.

Correct Answer: B QUESTION 85
Based on the above pictures. How should you do to prevent the user Doug Doe from editing user information of members of the students group?
A. You should use Directory Access Controls (DACs) to limit Doug Doe’s read and write access to records in the directory.
B. You should use Network Access Control Lists (NACLs) to block Doug Doe’s access to Open Directory administration on the server.
C. You should use File system Access Control Lists (ACLs) to limit Doug Doe’s read and write access to configuration files on the server.
D. You should use Service Access Control Lists (SACLs) to prevent Doug Doe’s connection to Open Directory administration services on the server.

Correct Answer: A

Our material on our site Apple 9L0-620 is exam-oriented,keeping in view the candidates requirements and level of understanding.Apple 9L0-620 materials are in the most popular and easy-to-use PDF version. You can use it on any devices with you anywhere.

Continue Reading

ACSA, Apple

Apple 9L0-616 Answers, Up To Date Apple 9L0-616 Real Exam With The Knowledge And Skills

No Comments

I passed the Apple 9L0-616 exam this week with nearly 920 pts.I prepared myself with 140 Q&As, all questions from this dump.Apple 9L0-616 questions, 2hrs time limit.New questions in Exampass like “AD FS components in the environment”,“Windows PowerShell cmdlet ” “Office 365”.Just know all new Apple 9L0-616 questions you will be fine.

QUESTION 41
You are tuning an Xsan volume constructed from Xserve RAID LUNs.

Xserve RAIDs have an optimal transfer size of 1 MB (1048576 bytes). Given a block allocation size of 16
KB (16384 bytes), what is the optimum stripe breadth for the volume’s storage pools?
Click the Calculator button below to display a calculator for use with this question.
The C button on the Calculator clears all previous entries.
The CE button clears the last entry only.

A. 64 blocks
B. 65 blocks
C. 168 blocks
D. 256 blocks

Correct Answer: A QUESTION 42
Xsan volume names can only include ________.
A. low-ASCII characters
B. uppercase letters and numbers
C. lowercase letters and numbers
D. letters, numbers, and underscores

Correct Answer: D
QUESTION 43
You need to verify that an Xsan volume is running. Which process should you look for?
A. fsm
B. slapd
C. slurpd
D. lookupd
E. servermgrd

Correct Answer: A
QUESTION 44
Which THREE are valid Fibre Channel network topologies?
A. Star
B. Parallel
C. Token Ring
D. Point-to-Point
E. Arbitrated Loop
F. Switched Fabric
G. Unswitched Fabric
Correct Answer: DEF
QUESTION 45
In a RAID 5 array, what happens to the data on a hard disk drive that fails?
A. The data is reconstructed from parity data stored on a dedicated drive.
B. The data is reconstructed from data stored on the metadata controller.
C. The data remains in the array on a mirror drive that replaces the failed drive.
D. The data is reconstructed from parity data striped across the other drives in the array.

Correct Answer: D
QUESTION 46
The image above shows a portion of a pane in Xsan Admin. What happens if you click on the circled button?

A. A new LUN is created.
B. A new volume is created.
C. A new RAID array is created.
D. A new storage pool is created.

Correct Answer: D
QUESTION 47
A host bus adapter (HBA) is ________.
A. a copper cable that connects Fibre Channel nodes
B. a fiber-optic cable that connects Fibre Channel nodes
C. a command sent by the metadata controller to halt bus access by clients
D. an interface card that allows a computer to connect to a Fibre Channel network

Correct Answer: D
QUESTION 48
What tool should you use to view the World Wide Port Nodes (WWPNs) for an Apple Fibre Channel PCI card and an Apple Fibre Channel PCI-X card?
A. cvadmin
B. Xsan Admin
C. RAID Admin
D. Fibre Channel Utility

Correct Answer: D
QUESTION 49
You have created an Xsan volume with two storage pools, each composed of two LUNs. Where is the Xsan volume’s metadata and journaling information stored?
A. on the first LUN in each storage pool
B. on the second LUN in each storage pool
C. on the local drive of the metadata controller
D. on the first storage pool you added to the volume
E. on the second storage pool you added to the volume

Correct Answer: D
QUESTION 50
If you create multiple storage pools in a volume but do not use affinities, you should ensure that all the storage pools ________.
A. have different RAID levels
B. contain metadata and journaling data
C. provide the same data transfer rate to the user
D. appear as separate folders on the Xsan volume
Correct Answer: C
QUESTION 51
In an Xsan implementation, what TWO types of devices are connected to a Fibre Channel switch?
A. ISLs
B. SFPs
C. LUNs
D. targets
E. initiators

Correct Answer: DE
QUESTION 52
The aggregate bandwidth of a Fibre Channel fabric ________.
A. is 2 Gb/s (half duplex)
B. increases as nodes are added
C. decreases as nodes are added
D. cannot exceed 3200 MB/s (half duplex)

Correct Answer: B
QUESTION 53
You have created an Xsan volume with multiple storage pools, but no affinities. When you save a file to the Xsan volume, what governs the file’s physical storage destination?
A. the volume’s stripe breadth
B. the volume’s allocation strategy
C. the volume’s block allocation size
D. the storage pools’ configured access control lists

Correct Answer: B
QUESTION 54
You want to host three SAN volumes on an Xsan controller. What is the minimum amount of RAM that Apple recommends you install in the controller?
Click the Calculator button below to display a calculator for use with this question.
The C button on the Calculator clears all previous entries.
The CE button clears the last entry only.
A. 512 megabytes
B. 1.5 gigabyte
C. 2 gigabytes
D. 3 gigabytes

Correct Answer: C
QUESTION 55
Which THREE of these are valid directory domains for Xsan deployments in an environment that includes Windows computers running StorNext, and Mac OS X computers running Xsan?
A. NetInfo
B. etc/hosts
C. Active Directory
D. Network Information Service (NIS)
E. Open Directory configured as a replica
F. Windows NT primary domain controller (PDC)
G. Open Directory configured as a primary domain controller (PDC)
Correct Answer: CFG QUESTION 56
Xsan volume names can be no longer than ________ characters.
A. 16
B. 32
C. 70
D. 256

Correct Answer: C QUESTION 57
The image above shows a portion of an Xsan Admin pane. What is DELPHI, and what is its status?

A. DELPHI is a LUN in the Xsan volume, CAPRICA. DELPHI is running.
B. DELPHI is a LUN in the Xsan volume, CAPRICA. DELPHI is not running.
C. DELPHI is an Xsan volume in the SAN, CAPRICA. DELPHI is not running.
D. DELPHI is an Xsan storage pool in the Xsan volume, CAPRICA. DELPHI is running.

Correct Answer: C
QUESTION 58
In Fibre Channel terminology, the physical media that connect ports together in a SAN are called ________.
A. links
B. nodes
C. fibres
D. channels

Correct Answer: A
QUESTION 59
Which file contains the IP addresses of all metadata controllers?
A. fsmlist
B. fsname
C. fsmservers
D. fsnameservers

Correct Answer: D

The actual Apple 9L0-616 exam questions and answers will sharpen your skills and expand your knowledge to obtain a definite success.save your money and time on your preparation for your Apple 9L0-616 certification exam. You will find we are a trustful partner if you choose us as your assistance on your Apple 9L0-616 certification exam. Now we add the latest Apple 9L0-616 content and to print and share content.

Continue Reading

3COM, 3Com Certification

3Com 3M0-211 Cert, Sale Latest 3Com 3M0-211 Certification Exams With New Discount

No Comments

Attention Please:Professional new version 3Com 3M0-211 PDF and VCE dumps can now free download on Flydumps.com,all are updated timely by our experts covering all 3Com 3M0-211 new questions and questions.100 percent pass your exam.

QUESTION 41
Which three are Multilayer Giabit Software features of the Switch 40×0 Family? (Choose three)
Actualtests.com – The Power of Knowing
A. Supports RIP, RIP2 and ODPF
B. Protocol-based VLAN support
C. Link Aggregation and Resilient Links support
D. IP unicast routing with up to 256 router interfaces
E. Routed Access Control Lists based on application filtering
F. Multicast filtering with internet Group Multicast Protocol (IGMP) snooping and IGMP querier

Correct Answer: ACF
QUESTION 42
Which three are Smart IP Switch 40×0 family features? (Choose three)
A. Switch can function as a DHCP or BootP server
B. Supports both manual and automatic IP configuration
C. Uses SNMP trap to verify the availability of IP address pool.
D. Can select a random IP address from default assress range
E. Can receive an IP address from either a DHCP or BootP server
F. Network manager must release any automatically assigned address before the switch can be manually configured

Correct Answer: BDE
QUESTION 43
Which component of XRN technology is defined as: “An advanced routing implementation that allows multiple interconnected switches in an XRN solution to behave as a single active routing entity”?
A. XRN Interconnect
B. XRN Distributed Fabric
C. Distributed Link Aggregation (DLA)
D. Distributed Resilient Routing (DDR)
E. Distributed Device Management (DDM)
Correct Answer: D
QUESTION 44
Which two are valid XRN Fabric configurations? (Choose two)
A. Switch 4050 and Switch 4070
B. Switch 4060 and SuperStack 3 Switch 4950
C. Switch 4007 and SuperStack 3 Switch 4400
D. SuperStack 3 Switch 4400 and SuperStack 3 Switch 4900
E. Switch 4050 and Switch 4060,Swicth 4070 and SuperStack 3 Switch 4900

Correct Answer: AB
QUESTION 45
Which two 3Com switch families can currently be used to create an XRN Distributed Fabric (DF)? (Choose two)
A. 3Com Swicth 40×0 family
B. 3Com Swicth 4005 family
C. 3Com Swicth 4007 family
D. SuperStack 3 Swicth 4400 family
E. SuperStack 3 Swicth 4900 family

Correct Answer: AE
QUESTION 46
Which two components are required to create a geographically distributed XRN solution (excluding the appropriate 3Com switches)?(Choose two)
A. 4-port GBIC module
B. 3Com Network Supervisor
C. XRN Fabric Interconnect Modules
D. High-Bandwidth Interconnect Cable
E. Gigabit Multilayer Switching Software V4.X

Correct Answer: AE
QUESTION 47
What is minimum requirement to support the Resilient IP address feature of the SuperStack 3 Switch 4400?
A. Nothing – it is support by every switch
B. At least two switches must be stacked together
C. All the switches in a stack must have their own IP address
D. At least two switches in a stack, and both switches must have an IP address
Correct Answer: D
QUESTION 48
What is the procedure for upgrading a SuperStack 3 Switch 4400 SE to the enhanced switch feature set?
A. Enter the software upgrade code obtained from 3Com and reboot the switch
B. Copy the 3Com upgrade file to TFTP server on the same subnet as the switch, start the TFTP server and configure the switch, reboot the switch when the Power LED stops flashing
C. Copy the 3Com upgrade file to a TFTP server on the same network as the switch, start the TFTP server and configure the switch reboot the switch when the Power LED stops Actualtests.com – The Power of Knowing flashing
D. Purchase and obtain activation key for the Switch 4400 Enhanced Software Upgrade from 3Com using Command Line Interface (CLI) entry “system license add” enter activation key confirm.
Correct Answer: D
QUESTION 49
Which three Physical Layer components should you check when either the Switch 7700 or Switch 8800 is having a connection problem? (Choose three)
A. Link LEDs
B. Switch ARP tables
C. Switch VLAN assignments
D. MAC address for the link
E. RX error statistics for link
F. Link Speed, duplex mode and flow control

Correct Answer: AEF
QUESTION 50
Which three may be the cause of a Switch 7700 Network Layer 3 problem? (Choose three)
A. The switch trunk ports are not properly configured
B. The RIP versions are not the same between switches
C. The switches is not sending and receiving rout ipdates
D. Spanning Tree Protocol (STP) is disabled on the switch
E. The MAC address table “aging parameter” is set too high
F. Virtual Router Redundancy Protocol (VRRP) is not properly configured on the switch

Correct Answer: BCF
QUESTION 51
Which Switch 7700 command shows the prority used for input/output packet operations?
A. display priority-trust
B. display qos-interface all
C. display qos-interface traffic-priority
D. display qos-interface traffic-statistics

Correct Answer: A
QUESTION 52
Which three can be used to download a configuration fole on the Switch 7700?
Actualtests.com – The Power of Knowing
(Choose three)
A. Use IP PROTOCOL
B. Use FTP protocol
C. Use TFTP protocol
D. Use HTTP protocol
E. Use XMODEM protocol
F. Use the system “dump” command
Correct Answer: BCE
QUESTION 53
Which two are syslog features/ functions on the Switch 7700 and Switch 8800? (Choose two)
A. Responsible for all system information on output
B. By default, the syslog automatically clears its file every 30 days
C. Is divided into eight levels, which can be filtered based on a level
D. Serves as an information center of the system’s software modules
E. Can be dumped to aconsole, monitor, SQL database or ASCII text file

Correct Answer: CD
QUESTION 54
Which four are Link Aggregation features/functions on the Switch 7700? (Choose four)
A. The switch supports the IEEE 802.3ad standard
B. Link Aggregation ports must be consecutive switch ports
C. Link Aggregation ports should be set to TRUNK or HYBRID
D. Use the “display interface” command to see all ports within a group
E. Use the “display link-aggregation” command to see all ports within a group
F. A Link Aggregation port should be set to “access” if more than one VLAN is supported on the link

Correct Answer: BCDF

Preparing 3Com 3M0-211 exam is not difficult now.You can prepare from 3Com 3M0-211 Certification or 3Com 3M0-211 dumps.Here we have mentioned some sample questions.You can use our 3Com 3M0-211 study material notes for test preparation. Latest 3Com 3M0-211 study material available.

Continue Reading

3COM, 3Com Certification

3Com 3M0-300 Exam Sample, Latest Updated 3Com 3M0-300 Exam Dumps With Low Price

No Comments

Attention Please:Professional new version 3Com 3M0-300 PDF and VCE dumps can now free download on Flydumps.com,all are updated timely by our experts covering all 3Com 3M0-300 new questions and questions.100 percent pass your 3Com 3M0-300 exam.

QUESTION 37
When setting up QoS, Which of the following DSCP values have a higher priority than af11?
A. af43
B. cs1
C. cs7
D. ef

Correct Answer: D
QUESTION 38
For Maximum efficiency and assured Quality of Service, If Traffic has been marked on the ingress of all edge router interfaces. Where should the QoS policy be applied?
A. egress of all edge router interfaces
B. egress of all core router interfaces
C. egress of all router interfaces
D. ingress of all core router interfaces
Correct Answer: C
QUESTION 39
What attribute is essential to the method that BGP uses to avoid routing loops?
A. MED
B. Origin
C. AS path
D. Next hop
E. Local preference
Correct Answer: C
QUESTION 40
Which of the following statements about BGP Route Reflection is true?
A. There can be no more than one Router Reflector in an Autonomous System
B. Route Reflection allows some I-BGP routers to re-advertise routes obtained from I-BGP peers
C. Route Reflection allows some E-BGP routers to re-advertise routes obtained from I-BGP peers
D. Router 5000 series router does not support Route Reflection

Correct Answer: B QUESTION 41
Border Gateway Protocol (BGP) RFC 1771 defines an autonomous system (AS) as a set of routers under a single technical administration, using an interior gateway protocol and common metrics to route packets with the AS.
A. True
B. False

Correct Answer: A QUESTION 42
Router A, B and C are in one Autonomous System, while Router D is in another AS. Router A can only talk to Router D via Router B or if the Local-preference of Router B is set to 200 and the local-preference of Router C is set to 150. How will traffic be affected?
A. Traffic will be balanced
B. Traffic priority will be through Router B
C. Traffic priority will be through Router C
D. local-preference has nothing to do with traffic priority

Correct Answer: B QUESTION 43
After issuing a default local preference 200 command, What other command needs issued before the local preference can take effect?
A. save
B. reset bgp all
C. reset recycle
D. reset saved configuration

Correct Answer: B QUESTION 44
Which of the following commands is NOT required for MPLS to work?
A. lsr-id
B. mpls ldp enable
C. mpls l2vc 2.2.2.2

Correct Answer: C QUESTION 45
True or False: The lsp statistics Index begins at 0, but the lsp display starts at 1, therefore FEC1=LSP index 0
A. True
B. False

Correct Answer: A QUESTION 46
An IP frame in an Ethernet packet enters an MPLS domain. Where is the MPLS header inserted?
A. After the IP header
B. Before the Ethernet header
C. Between the Ethernet header and the IP header

Correct Answer: C QUESTION 47
When must clock master be set when using IPoA on the Router 5000/6000 series routers?
A. never
B. only when configuring a CPE device connecting to the network
C. only when configuring back to back connections between CPE devices
D. always

Correct Answer: C QUESTION 48
Which type of Virtual Circuits does the Router 6000 family support?
A. PVCs only
B. SVCs only
C. PVCs and SVCs

Correct Answer: A QUESTION 49
What does the following command do? [RTA-Serial 0/0] standby interface dialer0
A. defines the ISDN interface that will be used only if the primary interface fails
B. defines ISDN as the primary link and that there is a standby link called dialer0
C. shares the traffic load with the primary interface and will take the full load if primary fails
D. temporarily puts interface into standby state, interface will reconnect when link-state changes

Correct Answer: A QUESTION 50
Which of following QoS methods does nothing when used with DSCP to provide QoS for Voice?
A. Class-based Queuing
B. Weighted Fair Queuing
C. Weighted Random early Detection
D. Traffic Shaping Correct Answer: B

Well-regarded for its level of detail, assessment features, and challenging review questions and hands-on exercises,3Com 3M0-300 helps you master the concepts and techniques that will enable you to succeed on the 3Com 3M0-300 exam the first time.

Continue Reading

3COM, 3Com Certification

3Com 3M0-700 Exams, 100% Pass Rate 3Com 3M0-700 Actual Test With High Quality

No Comments

New Questions! Now more new added 3Com 3M0-700 exam questions and answers are available at Flydumps In Flydumps new 3Com 3M0-700 vce or pdf braindump file, you can get all 3Com 3M0-700 new questions and answers.We guarantee the 100% pass rate.

QUESTION 33
Which four components are required to use the NBX CTI Telephone Applications Program Interface (TAPI) solution? (Choose four.)
A. NBX CTI license
B. Any NBX system
C. H.323 protocol support
D. NBX TAPI service provider (NBXTSP) software
E. Computer supporting TAPI, for example, Microsoft Windows
F. Either IP On-the-Fly or Standard IP license for each NBX system
G. Desktop TAPI application software, for example, Desktop Call Assistant
Correct Answer: BDEG
QUESTION 34
What is Telephone Applications Program Interface (TAPI) Route Point?
A. NBX feature enabled in the System / TAPI Setup menu that provides intelligent Layer 3 IP routing for TAPI messages on a multi-system, company-wide bases
B. Virtual Network Call Processor (NCP) device or third party application that monitors and maps incoming calls, allowing the NCP to make intelligent routing decisions for the call
C. Virtual device within the Network Call Processor (NCP) to which outbound calls can be mapped, allowing 3rd party applications to make intelligent routing decisions for the call
D. Virtual device within the Network Call Processor (NCP) to which inbound calls can be mapped for a 3rd party application that monitors the route point and makes intelligent call route decisions

Correct Answer: D
QUESTION 35
Which three are features/requirements for using Unified Messaging for an NBX system? (Choose three.)
A. Requires NBX pcXset client software
B. Can use the computer default media player to listen to a message
C. APX messaging service functionality is provided by IMAP client on the NBX NCP
D. Requires a Windows-based PC with a minimum of 64MB RAM and full-duplex sound card
E. Users can use a TAPI4 compliant application to access and manage voice messages on a computer
F. Users can use an IMAP4 compliant application to access and manage voice messages on a computer

Correct Answer: BDF
QUESTION 36
Call Detail Reports can be customized, generated and printed by the administrator from the NetSet Operations Window.
A. True
B. False

Correct Answer: B
QUESTION 37
Which four are NBX Call Report (CDR) configuration options for an NBX system? (Choose four.)
A. Default setting is Disabled
B. Scramble the last digits for security
C. Determine if trunk-to-trunk calls are recorded
D. Choose how often a new tracking file will be created
E. Select what data fields will be tracked, for example, time of call, length, etc.
F. Compatibility format option, for example, Microsoft Excel or Lotus 123 formatting
G. Determine how long the tracking information will be retained before it is purged by the system

Correct Answer: ABCG
QUESTION 38
Which four are NBX CDR requirements? (Choose four.)
A. 24 MB of RAM
B. Linux Operating System
C. TAPI compliant application
D. Windows Operating System
E. IMAP4 compliant application
F. Adequate disk space for records
G. 12 MB of disk space for application
Correct Answer: ADFG
QUESTION 39
Which three changes require a NBX system reboot? (Choose three.)
A. New software version
B. Removing an interface card from an NBX chassis
C. Change to NCP information, for example, IP address, default gateway
D. Change to network protocol, for example, Standard IP or IP On-the-Fly
E. Change to Digital Line Card protocol, for example, Standard IP or IP On-the-Fly
F. Adding any new interface card to the NBX chassis, for example, Digital Line Card, Hub card, etc.

Correct Answer: ACD
QUESTION 40
Which four are NBX configuration backup/restore attributes? (Choose four.)
A. By default, NBX voice mail messages are backed up
B. Backup should be done after each major configuration change
C. Backup is normally onto the hard disk of the PC where you are running NetSet
D. To run a backup choose: System Configuration Icon, then Manage Data Tab and click Backup Database button
E. Data in a backup includes the Configuration database, Auto Attendant prompts, user voice mail greetings, and optionally all voice mail messages
F. To restore configuration information, choose the Operations Icon, Manage Data Tab, then select Browse to locate the configuration file and click Restore
G. To restore an individual user’s voice messages choose the Operations Icon, Manage Data Tab, input the users extension and click Restore Voice Mail Messages
Correct Answer: BCEF
QUESTION 41
Click theTask button.
Which of the interfaces is not currently active and reserved for future use?

A.
B.
C.
D.

Correct Answer:
QUESTION 42
Which of the following NBX Communication Systems supports software version R4.4?
A. NBX 100
B. NBX V3000
C. All NBX Systems
D. SuperStack 3 NBX

Correct Answer: B
QUESTION 43
Which four components are included with the NBX V3000 IP Communication System? (Choose four.)
A. System disk drive
B. One Analog FXS port
C. 16 MB memory module
D. Four Analog FXO ports
E. Two T1/E1 Digital Line ports
F. Network Call Processor (NCP)
G. Two Failover 10/100 Mbps Ethernet LAN ports

Correct Answer: ABDF
QUESTION 44
Which of the following NBX V5000 system components is field upgradeable or field replaceable?

A. CPU
B. Mirrored Disk drive
C. Analog Port Modules
D. Paging Port Modules
E. Redundant Power supply

Correct Answer: B
QUESTION 45
The NBX V3000 disk drive is field replaceable.

A. True
B. False

Correct Answer: A QUESTION 46
Click theTask button.
What icon would the administrator select to add a Page Zone or make modifications to an existing Page Zone?

A.
B.
C.
D.

Correct Answer:
QUESTION 47
Which four steps should the NBX administrator perform to set up a new Page Zone that includes an external broadcast over a public address (PA) system? (Choose four.)
A. Specify the MAC or IP address of PA system
B. Checkbox “Add External Page” to include PA system
C. Specify the Page Zone name and associated zone extension
D. Add new members by clicking on members in the “Member” list
E. Select User Configuration / Page Zones / Add to create a new page zone
F. Add new members to the page zone by typing in their extension and name
G. Select Device Configuration / Telephone Groups / Page Zones to create a new page zone

Correct Answer: BCDE QUESTION 48
NBX code releases prior to 4.4 have which paging capabilities? (Choose two.)
A. Up to nine (9) paging zones can be created
B. Users can disable paging on their individual phones
C. There is no limit on the number of users in a page zone
D. Page users through telephone speakers and/or external Public Address system
E. Can page all phones with speakers or devices connected to the paging port or both simultaneously

Correct Answer: DE QUESTION 49
Click theTask button.
What icon would the administrator select to change configurable operator system default values?
A.
B.
C.
D.

Correct Answer:
QUESTION 50
Click theTask button.
To override the default destination for System and Personal Operators what tab would a user select?
A.
B.
C.
D.

Correct Answer:
QUESTION 51
Which three office-to-office and/or office-to-remote user call options are supported by the NBX systems? (Choose three.)
A. With a single NBX system at HQ, users can call to/from a remote office across the data network WAN link using Layer 3 IP communications
B. With a NBX Network Call Processor (NCP) and NBX ConneXtions Gateways at each site, users can call to/from the sites via a Virtual Tie Line (VTL)
C. With a single NBX system at HQ and pcXset on the remote office PC, the remote user can call to/from HQ via any WAN link using TCP/IP Layer 4 communications
D. With a NBX Network Call Processor (NCP) at each location, users can call to/from the sites via a Virtual Tie Line (VTL) using IP On-the-Fly or a Standard IP license
E. With a NBX system and NBX ConneXtions Gateways at each location, users can call to/from the sites via a WAN link that supports IP protocol, for example, VPN, T1, E1 and Frame Relay

Correct Answer: ADE
QUESTION 52
Which three are features of the SuperStack 3 NBX system? (Choose three.)
A. Operates at 10Mbps
B. Supports up to 1500 devices
C. Supports up to 200 devices, including up to 100 central office lines
D. Redundancy options include dual power supplies and disk mirroring
E. Has two integrated, failover 10/100 Mbps Ethernet ports for LAN connectivity
F. System scales to 12 auto-attendant voice messaging ports and 80 hours of voice-mail storage
Correct Answer: BDE
QUESTION 53
Which of the following is not a benefit of convergence?
A. Single wiring infrastructure
B. Reduced cost
C. Increased costs
D. Increased productivity
E. Reduced maintenance
F. Simple moves, adds and changes

Correct Answer: C
QUESTION 54
Which two are required to use standards based 802.1p voice prioritization for an NBX phone system? (Choose two.)
A. VLAN tagging must be turned on
B. Requires NBX 3XXX model phones
C. Network switches must support IEEE 802.1p
D. Each NBX phone must be attached to the network through a PC that supports VLAN tagging
E. SuperStack 3 NBX Network Communication System and the NBX 100 Communication System do not support packet prioritization

Correct Answer: AC
QUESTION 55
Which three are true statements concerning Silence Suppression? (Choose 3.)
A. Enabling Silence Suppression prioritizes voice traffic
B. Enabling Silence Suppression reduces network traffic
C. Can be enabled or disabled for the entire system only.
D. A device that detects silence in a conversation will not send any packets to the other device during the period of silence
E. Can be enabled or disabled for the entire system, or for individual telephones and line card ports
F. A device that detects silence in conversation sends a small packet with a “silence indicator,”rather than a full packet of “digitized silence”

Correct Answer: BEF
QUESTION 56
When Silence Suppression is enabled, a device that detects silence in a conversation will not send any packets to the other device during the period of silence.
A. True
B. False

Correct Answer: B
QUESTION 57
Which four are hardware redundancy features of the SuperStack 3 NBX Communication System? (Choose four.)
A. Disk mirroring on the NBX V5000 Call Processor
B. Dual NCP support in the NBX V5000 Call Processor
C. Dual-homing support for T1/E1 Digital Line Card ports
D. Failover 10/100 Mbps Ethernet uplink ports for LAN connectivity
E. External Redundant Power Supply (RPS) for NBX V5000 Chassis
F. NBX V5000 Chassis internal backup power supply with load sharing
G. NBX V5000 Call Processor internal backup power supply with load sharing
Correct Answer: ADEG QUESTION 58
Click theTask button.
What icon would the administrator select to view current system settings such as software version, serial number, host name, and the NBX IP Address?

A.
B.
C.
D.

Correct Answer:
QUESTION 59
Which three are hardware attributes of the 3Com NBX 100 Communication System? (Choose three.)
A. Offers optional hot-swap power supply
B. Requires a Network Call Processor (NCP) for call setup and teardown
C. Provides one 10/100 Mbps Ethernet switched port on the NCP for network connectivity
D. Is a combination of two required chassis ?the Network Call Processor and the interface chassis
E. Requires only one Network Call Processor card, even if multiple NBX 100 Chassis are installed on a LAN
F. Has 7 card slots, 6 of which are useable with the top useable slot designated for the Network Call Processor Card
Correct Answer: BEF
QUESTION 60
Click theTask button.
Which NBX Phones support the IEEE 802.3af Power over Ethernet (PoE) standard? (Choose all that apply.)

A.
B.
C.
D.

Correct Answer: QUESTION 61
An Analog Terminal Card has how many RJ-11 ports?
A. 1
B. 3
C. 4
D. 5

Correct Answer: C QUESTION 62
Click theTask button.
What icon would the administrator select to modify an Analog Terminal Adapter (ATA) bandwidth compression settings?

A.
B.
C.
D.

Correct Answer:
QUESTION 63
Your department employees all have the same NBX Business telephones on their desktop. As the NBX system administrator for your group, you have been asked to setup the programmable buttons on the phones so they all have the same function. What is the easiest way to configure the NBX phones for your department?
A. Create a new Telephone Group with the required settings. Assign the users in the department to the new group
B. Program your phone with the button settings. Have the users copy the button settings by entering your extension in the User Device Setup menu
C. Program your phone using the NBX user configuration software. E-mail the file to the users in your department. The users load the file using the TAPI software
D. Create a new Telephone Group with the required settings. Have the users in the department choose the new Telephone Group in the User Device Setup menu
E. Program your phone with the button settings. Forward your user configuration via the phone to all the users in your department. Have them apply the configuration to the phone

Correct Answer: A
QUESTION 64
A manager at extension 3002 has asked you to setup a NBX Communication System to allow an assistant at extension 1010 to filter calls. You have decided the best way to do this is Bridged Station Appearance.
You have already setup the secondary phones button mappings. In the illustration of the primary phone button mappings, what is the correct extension number to add to the Bridged Extension Number Field?

A. 1010
B. 1010-2
C. 3002
D. 3002-2

Correct Answer: C

3Com 3M0-700 Questions & Answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the latest version of 3Com 3M0-700. We provide our customers with the excellent 7×24 hours customer service.We have the most professional 3Com 3M0-700 expert team to back up our grate quality products.If you still cannot make your decision on purchasing our product, please try our 3Com 3M0-700 free pdf

Continue Reading

Acpt, Apple

Apple 9L0-207 Braindumps, Offer Apple 9L0-207 Actual Questions With The Knowledge And Skills

No Comments

Because Apple 9L0-207 exam has changed recently,Flydumps presents the new version of Apple 9L0-207 practice test, which helps candidates to pass the Apple 9L0-207 exam easily.The exam dumps covers all aspect of Apple 9L0-207 exam.You can visit our website to free Apple 9L0-207 download the New Version VCE Player.

QUESTION 11
In the component isolation technique, if you do not get a startup chime and/or a flashing question mark, you check the components of the minimal system by _____.
A. visually inspecting them for damage
B. replacing them with known-good parts in any order
C. adding more known-good parts in a specified order
D. replacing them with known-good parts in a specified order
Correct Answer: D
QUESTION 12
When practicing component isolation, which ONE of the following components would NOT be a part of a minimal system configuration for a PowerBook G4 (12-inch 1.5GHz)?
A. SDRAM
B. Speaker
C. Hard Drive
D. DC-in Board
E. Backup battery
F. Power adapter
Correct Answer: C
QUESTION 13
A customer is experiencing intermittent battery drain while using her PowerBook G4 (17-inch 1.67 GHz) connected to a working power adapter. You have reset the PMU and the problem persists. What is the most likely cause of the problem?
A. Corrupt OS
B. Faulty PMU
C. Faulty logic board
D. Incompatible power adapter
Correct Answer: D
QUESTION 14
To isolate a video problem to hardware or software on a PowerBook G4 (17-inch 1.67GHz), which of the following steps should you try FIRST?
A. Replace the built-in display.
B. Reinstall the appropriate Mac OS.
C. Verify the hard disk with Disk First Aid.
D. Start up from a known-good startup disc.
Correct Answer: D
QUESTION 15
Which one of the following troubleshooting steps is NOT appropriate when troubleshooting an iBook or PowerBook with no video on its built-in display?
A. Hold a bright light against the screen.
B. Check if brightness settings are all the way down.
C. Connect an external display to the iBook or PowerBook.
D. Check the network settings on the iBook or PowerBook.
E. Check the internal video cables & connectors for damage.
Correct Answer: D
QUESTION 16
A customer’s iBook G4 (Late 2004) is freezing intermittently. Which of the following steps should you try FIRST to identify the problem?
A. Try quick fixes.
B. Repair the iBook.
C. Perform a split-half search.
D. Run appropriate diagnostics.
E. Escalate the problem to Apple.
F. Gather information about the problem.

Correct Answer: F
QUESTION 17
Which of the following is ALMOST CERTAINLY a software-related problem?
A. No video on display
B. Single beep at startup
C. No Internet connectivity
D. iPhoto quits when launched

Correct Answer: D
QUESTION 18
A customer states that he cannot open an AppleWorks file. What is the most productive question to ask him FIRST?
A. Can you open any files?
B. Can you open other AppleWorks files?
C. What version of AppleWorks are you using?
D. Is your Mac connected to a network?

Correct Answer: B
QUESTION 19
A PowerBook G4 has no video, but powers on with a normal startup chime, and normal startup sounds from the hard drive. Which of the following steps should you try next?
A. Update the PowerBook G4’s firmware.
B. Replace the PowerBook G4 logic board.
C. Replace the PowerBook G4 LCD display.
D. Connect a known-good external display.

Correct Answer: D
QUESTION 20
You have replaced the optical drive in an iBook G4 (Late 2004). In what THREE ways should you test the repair before returning the system to the customer?
A. Leave the computer on overnight.
B. Verify that the original symptom is resolved.
C. Verify that no new symptoms have occurred.
D. Run all Apple Service Diagnostic tests for the iBook G4 (Late 2004).
E. Run Apple Service Diagnostic optical drive tests for the iBook G4 (Late 2004).
F. Start up the computer in Target Disk Mode to test the internal hard drive.

Correct Answer: BCD

Flydumps Free Apple 9L0-207 exam dumps are audited by our certified subject matter experts and published authors for development. Passtcert Apple 9L0-207 exam dumps are one of the highest quality Apple 9L0-207 Q&As in the world.It covers nearly 96% real questions and answers, including the entire testing scope. Passtcert guarantees you pass Apple 9L0-207 exam at first attempt.

Continue Reading

ACTC, Apple

Apple 9L0-060 Certification Material Provider, Buy Latest Apple 9L0-060 Exam Practice PDF Is Your Best Choice

No Comments

Where to free download the new Apple 9L0-060 exam questions to pass the exam easily? Now,Flydumps has publised the new version of Apple 9L0-060 exam dumps with new added exam questions.you can also get free VCE and PDF, and the new Apple 9L0-060 practice tests ensure your exam 100% pass. Visit Flydumps.com to get the 100% pass ensure!

QUESTION 11
In Mac OS X v10.4 the default Group and Others permissions for the Drop Box folder in a users Public folder are__________
A. Read only
B. Write only
C. Read & Write
D. No Access

Correct Answer: B
QUESTION 12
When an administrator attempts o drag an application to the Applications folder, a message reports that the file was not moved because the folder, “Applications”, cannot be modified. Which step will correct this issue?
A. Log in with the Master Password.
B. Restart the computer and log in again.
C. Click the Repair Permissions button in Disk Utility
D. Add the administrator to the wheel group on the computer.

Correct Answer: C
QUESTION 13
You connect a USB DEVICE TO YOUR Macintosh keyboard, and see a error message that there is not enough poser available for this device. Which TWO steps could each resolve this problem?
A. Plug the device into a different USB port on the keyboard.
B. Restart the computer with the USB device still connected.
C. Plug the device into a USB port on the back of the computer.
D. Open System Profiler and search for a corrupted device driver.
E. Connect the device to external power rather than using bus power.

Correct Answer: CE
QUESTION 14
What is required when initially configuring a Bluetooth device, such as a cell phone, to pair with a computer running Mac OS X v10.4?
A. The computer or the device must be set to be Discoverable.
B. The computer and the device must have the sleep function disabled.
C. The computer and the device must be within line of sight of each other.
D. The computer or the device must be set to Require Network Authentication
Correct Answer: A
QUESTION 15
What application includes synchronization software for Bluetooth-enabled cellular phones?
A. iSync
B. Setup Assistant
C. Bluetooth
D. Bluetooth Serial Utility
Correct Answer: A
QUESTION 16
You are troubleshooting a volume connected via target disk mode. What could present a problem?
A. Target disk mode volumes are locked by default.
B. Target disk mode volumes have no files system journal.
C. Keychains and preferences must be unencrypted before they can be viewed.
D. Standard Mac OS X file ownership can be ignored, so files can be deleted accidentally.
Correct Answer: D QUESTION 17
In Mac OS X v10.4 a non-administrator user Lind, can sore her files in _________________
A. /System
B. /User/Linda
C. /Home/Linda
D. /Applications

Correct Answer: B
QUESTION 18
Disk Utility can display ______________ (Select all that apply)
A. a disk drive’s capacity
B. a list of partitions on a disk drive
C. the number of files in the system folder
D. the volume format of a mounted partition
E. the number of files on an unmounted partiion
F. a graphic with the locations of file fragments on a RAID volume

Correct Answer: ABCD
QUESTION 19
Your iMac G5 should be able to connect to a network via a built-in Ethernet connection when it starts up in Safe Mode in Mac OS X 10.4?
A. True
B. False

Correct Answer: A
QUESTION 20
Your Macintosh has been exhibiting system problems, so you need to perform troubleshooting and maintenance. Which TWO tasks can you execute from another Macintosh after booting your sysem in Firewire Target Disk Mode?
A. Repair permissions.
B. Partition drive (non-destructive)
C. Enable System Administrator (root) login.
D. Run secure erase to defragment the drive.
E. Use the Repair Disk command in Disk Utility
Correct Answer: AE

All our Cisco products are up to date! When you buy any Apple 9L0-060 product from Certpaper, as “Apple 9L0-060 Questions & Answers with explanations”, you are automatically offered the Apple 9L0-060 updates for a total of 90 days from the day you bought it. If you want to renew your Apple 9L0-060 purchase during the period of these 90 days, your Apple 9L0-060 product is renewed and you are further enabled to enjoy the free Cisco updates.

Continue Reading

ACTC, Apple

Apple 9L0-060 Guide Provider, Prompt Updates Apple 9L0-060 Study Material With 100% Pass Rate

No Comments

[The Newest Dumps] Real Apple 9L0-060 exam dumps revised by experts, they were updated with the change of the Apple 9L0-060,covering all the whole aspects of Apple 9L0-060 exam. Just have a training of Flydumps Apple 9L0-060 exam questions to guarantee your 100% pass

QUESTION 30
Which two options should be used when Disk Utility cant repair a disk in Mac OS X 10.4?
A. Back up the data, and erase and install Mac OS X
B. Archive and install Mac OS X preserving user and network settings
C. Click Repair Disk one more time to see if a second attempt resolves the issue
D. Archive and Install Mac OS X WITHOUT preserving user and network settings
E. Back up the data and use a Mac OS X 10.4 compatible third-party utility to repair the disk

Correct Answer: AE QUESTION 31
How do you force a Macintosh computer to start up from a disc in the optical drive?
A. Press and hold the V key while the computer starts up, and enter boot cd at the prompt.
B. Press and hold the C key while the computer starts up.
C. Choose “Restart from Disc”from the Apple menu.
D. Press and hold the button for 5 seconds

Correct Answer: B QUESTION 32
When Maria logs in on her Mac OS X v10.4 computer, a utility she recently installed launches and disables the mouse and keyboard.
How can Maria prevent the utility from automatically launching when she logs in?
A. Hold down the V key while the computer start up.
B. Hold down the Shift key immediately after logging in.
C. Hold down the option key while the computer starts up.
D. Log in as another user and use Disk Utility to fix permissions on the boot volume

Correct Answer: B QUESTION 33
How do you start up a Mac OS X computer in single-user mode?
A. Restart while holding down Command -S
B. Restart while holding down command-option-S
C. Choose “Restart in single -user mode” from the Apple menu
D. Select Single-User Mode in the Startup Disk preference and restart

Correct Answer: A
QUESTION 34
Starting up a Mac OS X v10.4 computer in verbose mode is a useful FIRST troubleshooting step when___________
A. applications are crashing frequently
B. you suspect a font might be corrupted
C. the system repeatedly crashes during startup
D. System Profiler cannot identify the startup device

Correct Answer: C
QUESTION 35
After pressing the power button on your Macintosh you hear three beeps instead of a startup chime. What does this indicate?
A. The monitor is not properly connected
B. There is a hardware problem such as bad RAM.
C. The computer was not shut down properly the last time it was used.
D. The computer was unable to locate a disk with a bootable system folder.

Correct Answer: B
QUESTION 36
The Universal Access preferences allow you to ____________
A. create new keyboard shortcuts
B. apply interface themes the Finder
C. configure your computer as wireless access point
D. enable the use of assistive input and output devices

Correct Answer: D
QUESTION 37
You have just completed a default installation of Mac OS v 10.4 (an “easy install”).Which THREE types of applications can run without requiring additional software installations?
A. BSD
B. DOS
C. Java
D. Windows
E. Mac OS 9
F. Native Carbon and Cocoa
Correct Answer: ABC
QUESTION 38
Which application provides the most detail about system processes in Mac OS X v10.4?
A. System Profiler
B. Activity Monitor
C. Process Manager
D. CPU Monitor Expanded Window

Correct Answer: B
QUESTION 39
Which statement is true of protected memory in Mac OS X v10.4?
A. Protected memory is configured in System Preferences
B. Protected Memory is installed in a unique RAM slot on the motherboard.
C. Protected memory safeguard against native application errors impacting other running applications
D. Protected memory uses a temporary file to ensure there is sufficient RAM available for open application.

Correct Answer: C
QUESTION 40
A user is unable to open a document from within an application. Which is not a recommended troubleshooting procedure?
A. Try to open a different document with the same application
B. Double-click the document icon in the Finder while holding down the option key
C. Try to open the document from another application that support the same document type
D. Copy the document to the Shared folder then log in as another user and try to open the document

Correct Answer: B
QUESTION 41
The default network protocol in Mac OS X 10.4 is___
A. IPX
B. SMB
C. TCP/IP
D. Netbios
E. Apple Talk
Correct Answer: C
QUESTION 42
The Lookup tool in Network Utility____________
A. finds the complete route between your computer and another computer on an IP network
B. determines which ports are open on a remote computer
C. resolve host names to IP addresses
D. resolve IP addresses to host names
E. looks up routing table information
Correct Answer: CD
QUESTION 43
What printing system is used by Mac OS X v10.4?
A. Unified Printing Manager
B. Macunosh Printing MANAGER
C. Common UNIX printing System
D. Portable Document Printing System

Correct Answer: C QUESTION 44
An older network printer is not appearing in the list of discovered printers in Printer Setup Utility’s Default Browser pane in Mac OS X v10.4. What is a possible remedy?
A. Select the Apple Talk plugin in Directory Access.
B. Enable the Discover Printers option in Apple Talk preferences
C. Enable the Apple Talk option in the Printing pane of print & Fax preferences
D. Enable the Make Apple Talk Active option in the Apple Talk pane of Network preferences.

Correct Answer: D QUESTION 45
How can you identify who is talking during a multi-way audio conference in Mac OS X 10.4?
A. The buddy’s icon is highlighted
B. By watching the sound-level meter
C. All other participants are dimmed
D. The buddy’s line marked with a “speaking” flag

Correct Answer: B QUESTION 46
What requirements must be met orderto participate in a multti-way video conference in Mac OS X 10.4 iCha?
A. Broadband internet connection, Mac OS X 10.4 iChat and Cinema Display
B. Any internet connection, iChatt AV 2.5 higher, iSigh, and Mac OS X 10.4
C. Any Internet connection. Mac OS X 10.4 iChat, AND COMPATIBLE VIDEO DEVICE
D. Broadband Internet connection, Mac OS X 10.4 iChat, and a compatible video device Correct Answer: D

Worried about Apple 9L0-060 pass results? Adopt most reliable way of exam preparation that is Apple 9L0-060 Questions & Answers with explanations to get reliable high Apple 9L0-060 pass result.Flydumps definitely guarantees it!

Continue Reading