What is Cisco 400-101 dumps? The CCIE Routing and Switching Written Exam (400-101 CCIE Routing and Switching) exam is a 120 Minutes (90 – 110 questions) assessment in pass4itsure that is associated with the CCIE Routing and Switching certification.”CCIE Routing and Switching Written Exam” is the exam name of Pass4itsure Cisco 400-101 dumps test which designed to help candidates prepare for and pass the Cisco 400-101 exam. Helpful Cisco 400-101 dumps vce CCIE Routing and Switching exam V5.1 video training online. It is famous for the most comprehensive and updated by the highest rate https://www.pass4itsure.com/400-101.html dumps. It also can save time and effort.
[2017 New Updated Pass4itsure 400-101 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWczJDVzl1SUJLWms
[2017 New Updated Pass4itsure 70-696 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWkMxQnU0WEtjbXM
Pass4itsure Latest and Most Accurate Cisco 400-101 Dumps Exam Q&As:
7.Which technology does OSPFv3 use to authenticate packets
A. SHA256
B. 3DES
C. AES
D. IPsec
400-101 exam Correct Answer: D
Explanation
Explanation/Reference:
8.Which two statements about the OSPF two-way neighbor state are true? (Choose two)
A. It is valid only on NBMA networks.
B. Each neighbor receives its own router ID in a hello packet from the other neighbor.
C. Each neighbor receives an acknowledgement of its own hello packet from the other neighbor.
D. Each neighbor receives the router ID of the other neighbor in a hello packet from the other neighbor
E. It is valid only on point-to-point networks.
F. Each neighbor receives a hello message from the other neighbor.
Correct Answer: BC
Explanation
9.Which statement is true about LLDP?
A. LLDP provides VTP support.
B. LLDP does not use a multicast address to communicate.
C. LLDP can indicate only the duplex setting of a link, and not the speed capabilities.
D. LLDP does not support native VLAN indication.
400-101 dumps Correct Answer: D
Explanation
10.Which data plane protocol does EIGRP Over the Top use
A. GRE
B. MPLS
C. LISP
D. IP-in-IP
Correct Answer: C
Explanation
Explanation/Reference:
11.Which three configuration settings must match for switchs to be in the same MST region?(Choose three)
A. VLAN names
B. Revision number
C. Region name
D. Domain name
E. Password
F. VLAN-to-instance assignment
400-101 pdf Correct Answer: BCF
Explanation
Explanation/Reference:
12.Which two statements about static routing are true?(Choose two)
A. It is highly scalable as networks grow.
B. It provides better security than dynamic routing.
C. It reduces configuration errors.
D. It requires less bandwidcth and fewer CPU cycles than dynamic routing protocols.
E. It can be implemented more quickly than dynamic routing.
Correct Answer: BD
Explanation
Explanation/Reference:
13. To recover a file from a snapshot using a Windows client, what directory will a user look for?
A. snapshot
B. .snapshot
C. snap
D. ~snapshot
400-101 vce Answer: D
14. To recover a file from a snapshot using a UNIX client, what directory will a user look for?
A. snapshot
B. .snapshot
C. snap
D. ~snapshot
Answer: B
15. Which volume option will disable automatic snapshot creation?
A. Setting the nosnap volume option to on
B. Turning off access to the .snapshot directory
C. Setting the nosnapdir option to on
D. Setting snap reserve to 0%
400-101 exam Answer: A
16. Choose the best way to minimize backup time.
A. Tape backup over the WAN connection
B. Utilizing a larger tape capacity
C. Organizing data in volumes and qtrees
D. Using multiple local tape drives
Answer: D
17. What two conditions should be verified prior to performing remote backups? (Choose 2)
A. The trust relationships between the source and the destination
B. That clustered failover is disabled
C. That rsh is enabled for remote access
D. That remote backup is enabled
400-101 dumps Answer: AC
18. Which line describes a 50M tree quota for a qtree named “mydata” on volume “vol1”? Target Type Disk Files Thold Sdisk Sfiles A. /vol/vol1/mydata tree 50M –
B. /vol/vol1 steve@tree 50M –
C. steve tree@/vol/vol1 50M –
D. /vol/vol1 qtree/steve 50M –
Answer: A
19. If there are problems with user quotas being misapplied, the following two files should be checked:
A. /etc/quotas and /etc/rc
B. /etc/quotas and /etc/usermap.cfg
C. /etc/rc and /etc/usermap.cfg
D. /etc/quotas and /etc/quotarules
400-101 vce Answer: B
20. Which three actions can be performed with the restore command? (Choose 3)
A. View a list of files on tape.
B. Restore individual files and directories.
C. Restart a failed restore process.
D. Enter a number to specify how many filemarks should be skipped.
Answer: ABC
21.CORRECT TEXT
Create the partition having 100MB size and mount it on /mnt/neo
400-101 exam Answer and Explanation:
1. Use fdisk /dev/hda ¨¤ To create new partition.
2. Type n ¨¤ For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ¨¤ You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda? Where ? is your partition number
10. Or
11. mke2fs -j /dev/hda? ¨¤ To create ext3 filesystem.
12. mkdir /mnt/neo
13. vi /etc/fstab
14. Write:
15. /dev/hda? /mnt/neo ext3 defaults 1 2
16. Verify by mounting on current Sessions also:
17. mount /dev/hda? /mnt/neo
22. CORRECT TEXT
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP Forwarding.
Answer and Explanation:
1. echo “1” >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf
net.ipv4.ip_forward=1
/proc is the virtual filesystem, containing the information about the running kernel. To change the parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the value from /etc/sysctl.conf.
23.CORRECT TEXT
Some users home directory is shared from your system. Using showmount -e localhost command, the shared directory is not shown. Make access the shared users home directory.
400-101 dumps Answer and Explanation:
1. Verify the File whether Shared or not ? : cat /etc/exports
2. Start the nfs service: service nfs start
3. Start the portmap service: service portmap start
4. Make automatically start the nfs service on next reboot: chkconfig nfs on
5. Make automatically start the portmap service on next reboot: chkconfig portmap on
6. Verify either sharing or not: showmount -e localhost
7. Check that default firewall is running on system ? if running flush the iptables using iptables -F and stop the iptables service.
24.CORRECT TEXT
neo user tried by:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
files created successfully. Again neo tried to create file having 70K using following command:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
But he is unable to create the file. Make the user can create the file less then 70K.
Answer and Explanation:
Very Tricky question from redhat. Actually question is giving scenario to you to implement quota toneo user. You should apply the quota to neo user on /home that neo user shouldn’t occupied space more than 70K.
1. vi /etc/fstab
LABEL=/home /home ext3 defaults,usrquota 0 0 ¨¤ To enable th quota on filesystem you should mount the filesystem with usrquota for user quota and grpquota for group quota.
2. touch /home/aquota.user ¨¤Creating blank quota database file.
3. mount -o remount /home ¨¤ Remounting the /home with updated mount options. ou can verify that/home is mounted with usrquota options or not using mount command.
4. quotacheck -u /home ¨¤ Initialization the quota on /home
5. edquota -u neo /home ¨¤ Quota Policy editor See the snapshot
Disk quotas for user neo (uid 500):
Filesystem blocks soft hard inodes soft hard
/dev/mapper/vo-myvol 2 30 70 1 0 0
Can you set the hard limit 70 and soft limit as you think like 30.
Verify using the repquota /home command.
25.CORRECT TEXT
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size of that Logical Volume is 124MB. Make successfully that the size of Logical Volume 245MB without losing any data. The size of logical volume 240MB to 255MB will be acceptable.
400-101 pdf Answer and Explanation:
1. First check the size of Logical Volume: lvdisplay /dev/vo/myvol
2. Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol
3. Make Available the size on online: resize2fs /dev/vo/myvol
4. Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
5. Verify that the size comes in online or not: df -h
We can extend the size of logical Volume using the lvextend command. As well as to decrease the size of Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical Volume without unmount as well as we can bring the actual size of Logical Volume on online using ext2online command.
26.CORRECT TEXT
Quota is implemented on /data but not working properly. Find out the Problem and implement the quota to user1 to have a soft limit 60 inodes (files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user’s or a group of users’ ability to consume disk space. This prevents a small group of users from monopolizing disk capacity and potentially interfering with other users or the entire system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on corporate file servers to ensure continued availability of their systems. Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem. Once the affected partition is full, other users are effectively denied upload access to the disk. This is also a reason to mount different filesystem directories on different partitions. For example, if you only had partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all of the space in your root directory (/). Without at least a little free space in the root directory (/), your system could become unstable or even crash. You have two ways to set quotas for users. You can limit users by inodes or by kilobyte-sized disk blocks. Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute space. You can set up different quotas for different filesystems. For example, you can set different quotas or users on the /home and /tmp directories if they are mounted on their own partitions. Limits on disk blocks restrict the amount of disk space available to a user on your system. Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas. As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure quotas on RHEL only through the command line interface.
1. vi /etc/fstab
/dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition. Mount -o remount /dev/hda11 /data
3. touch /data/aquota.user
4. quotacheck -ufm /data
5. quotaon -u /data
6. edquota -u user1 /data and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can’t cross by the user. Use the quota command or repquota command to monitor the quota information.
With it, you will pass the exam easily. If you pass the exam, you will have the self-confidence, with the confidence you will succeed.Related Cisco 400-101 dumps CCIE questions and answers proved that to pass the Cisco https://www.pass4itsure.com/400-101.html dumps exam certification is very difficult. But do not be afraid, Pass4itsure have many IT experts who have plentiful experience.