The actual Cisco https://www.pass4itsure.com/642-188.html exam questions and answers will sharpen your skills and expand your knowledge to obtain a definite success.save your money and time on your preparation for your Cisco 642-188 certification exam. You will find we are a trustful partner if you choose us as your assistance on your Cisco 642-188 certification exam. Now we add the latest Cisco 642-188 content and to print and share content.
Exam A
QUESTION 1
What is the valid range of gain for the correct white color balance?
A. greater than 1 and less than 5
B. greater than 2 and less than 5
C. greater than 1 and less than 7
D. greater than 2 and less than 7
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 2
Given the following:
Cisco Telepresence endpoint A:
-Phone field Disable Speakerphone and Headset is checked
-DN configuration Auto answer is enabled
Cisco Telepresence endpoint B:
-Phone field Disable Speakerphone and Headset is unchecked
-DN configuration Auto answer is enabled
What happens when Cisco Telepresence endpoint A calls Cisco Telepresence endpoint B?
A. Cisco Telepresence endpoint A gets a fast busy
B. Cisco Telepresence endpoint B gets a ring and the call will establish as an audio-only call out of the Cisco IP-Phone
C. Cisco Telepresence endpoint B gets a ring and the cal will establish as a video-only call
D. Cisco Telepresence endpoint B gets a ring and the call will establish, but there is no audio or video
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 3
How should directory number of the phone and the Cisco Telepresence endpoint be configured in the Cisco Unified CallManager?
A. As a shared line where the codec and IP Phone share the same directory number
B. As a single line for the codec and a single line for the phone using the same directory number
C. As an overlay line using the same directory number
D. As a single line for the phone and it only has a directory phone number. The codec uses the IP address of the phone
Correct Answer: A Section: (none) Explanation
Explanation/Reference: QUESTION 4
What is not a feature of the Cisco Telepresence System 500?
A. The system has a built-in empedded microphone array
B. The system supports life-size images on the display
C. The system has a built-in facade lighting control
D. The system has two embedded speakers to support wideband audio
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 5
Which two statements describe the design goals for the Cisco Telepresence system? (choose two)
A. Creating a uniform feeling across all installations helps to create the illusion of participants being in the same room
B. Cisco does not recommend colors so that customers can choose a palette that best complements their corporate standards, while creating an environment that is both warm and inviting
C. Customers should use different colors in each of the Cisco Telepresence rooms to help identify the diffrent locations
D. Textures and adornments on the walls should not be similar to those of the walls in the other rooms
E. Repeatability strengthens the feeling of a common seamless environment which enhances the overall experience
Correct Answer: AE Section: (none) Explanation
Explanation/Reference:
QUESTION 6
Which statement is correct when focusing the camera on the Cisco Telepresence System 500? (Choose two)
A. The green rectangle on the display is aligned with the small target
B. The green rectangle on the display is aligned with the large target
C. The red rectangle on the display is aligned with the small target
D. The red and green bars must be the exact same length for prober calibration
E. It does not matter which target is aligned with which rectangle as long as each rectangle is aligned with one of the targets
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 7
Which statement is correct when discussing the Cisco TelePresence System 1100?
A. The system is designed for one to two participants on camera in Cisco Telepresence meetings
B. The system is designed for two or six participants to be displayed on camera at one time
C. The system incorporates the design of the Cisco Telepresence System 1300. However, it has a single 37 inch plasma
D. Video integration with digital signage is supported during a Cisco Telepresence call
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 8
The Cisco TelePresence System 1100 and 1300 left and right speakers are connected to which component?
A. codec
B. audio extension box
C. POU
D. light control box
Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 9
Which two statements are correct when connecting a laptop direct to a codec to issue commands from the CLI? (Choose two)
A. Connect a PC to the secondary Ethernet camera port of the Cisco TelePresence codec
B. The Cisco TelePresence codec has two internal subnets (10.0.2.x / 24 and 172.16.2.x / 24) that are reserved for the secondary camera port
C. By default the username is Admin with a password of Cisco
D. Cisco TelePresence System IP address on the secondary camera port is the first address in the subnet that is assigned to your laptop by DHCP
Correct Answer: AD Section: (none) Explanation
Explanation/Reference:
QUESTION 10
What is the command path and action on the Cisco TelePresence codec WebGUI to place the camera in loopback mode?
A. Configuration > Hardware Setup > Cameras and click Start
B. Hardware Setup > Configuration > Cameras and click Start
C. Troubleshooting > Hardware Setup > Cameras and click Start
D. Configuration > Troubleshooting > Cameras and click Start
Correct Answer: C Section: (none) Explanation
Explanation/Reference: QUESTION 11
Which would be considered the best environment to house a dedicated Cisco TelePresence system?
A. a conference room in the corner of a building with the best view
B. a conference room next to the elevator for easy accesibility
C. a conference room along an interior corridor
D. an open space in the demonstration area of a briefing center
E. a large meeting room used for events
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 12
The customer decides to use static IP addressing for the codec. Which three parameters must be configured? (Choose three)
A. IP address
B. IP address subnet mask
C. gateway IP address
D. NTP server IP address
E. DNS server IP address
Correct Answer: ABC Section: (none) Explanation
Explanation/Reference:
QUESTION 13
Refer to the exhibit.
Identify the port number where the A/V expansion box should connect
A. 4
B. 5
C. 6
D. 7
E. 8
F. 9
G. 10
H. 11
I. 12
J. 13
Correct Answer: I Section: (none) Explanation
Explanation/Reference:
QUESTION 14
Which two statements are correct when calibrating the Cisco Telepresence cameras? (Choose two)
A. If the room uses fixed artificial lighting, click the Disable radio button for the Camera Auto Brightness and Camera Auto Color Balance
B. If the Auto Adjust test to automatically adjust lighting and color balance fails, you may need to add more light
C. If the room uses fixed artificial lighting, click the Enable radio button for the Camera Auto Brightness and Camera Auto Color Balance
D. If the room uses outside lighting, click the Disable radio button for the Camera Auto Brightness and Camera Auto Color Balance
Correct Answer: AB Section: (none) Explanation
Explanation/Reference:
QUESTION 15
When booting Cisco TelePresence 500, how do you determine which IP address is used by the codec before connecting to the codec via WebGUI?
A. The codec uses 10.1.1.1 as its default IP setting
B. The IP address is displayed on the phone user interface
C. The IP address is displayed during the boot process on the plasma
D. The codec uses 192.168.200.2 as its default IP setting
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 16
Drag the CTS 1000 quick assembly functions from the left and place on the right from start to finish order
Select and Place: Correct Answer:
Section: (none) Explanation
Explanation/Reference:
QUESTION 17
Using a supported browser, where must you navigate to test each component from the WebGUI of the Cisco Telepresence codec?
A. Configuration > Hardware Setup
B. Troubleshooting > Configuration issues
C. Configuration > System Settings
D. Troubleshooting > Hardware Setup
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 18
Which statement is correct when discussing room materials for a Cisco Telepresence room?
A. The audio subsystem is not designed to deliver excellent performance to normal drywall room surfaces
B. Standard drywall walls with a smooth finish are preferred
C. Walls and wall coverings with a heavy texture are encouraged
D. Cinder block and brick can be highly reverberant and therefore will likely require a coat of paint
E. Thin walls and doors should be enough to block unwanted sound from leaking into the room
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 19
Which device will cause a Cisco TelePresence call to drop if not plugged in?
A. Auto-Collaborate cable
B. camera HDMI
C. microphone
D. speaker
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 20
Refer to the exhibit.
Identify the port number where the HFR (Presentation) Codec Ethernet should connect.
A. 4
B. 5
C. 6
D. 7
E. 9 F. 10
G. 11
H. 12
I. 13
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 21
Given the following: Cisco TelePresence endpoint A: In the Cisco Unified Communications Manager, Quality is set to High Detail, Good Motion: 720p Cisco TelePresence endpoint B In the Unified CM, Quality is set to High Detail, Best Motion:1080p What happens when Cisco TelePresence endpoint A calls Cisco TelePresence endpoint B?
A. Cisco TelePresence endpoint A gets a fast busy.
B. The call connectsbut it drops with a Configuration mismatch error on Cisco TelePresence endpoint B.
C. Cisco TelePresence endpoint B quality upgrades to 1080p and the call goes through at 1080p.
D. Cisco TelePresence endpoint B quality drops down to 720p and the call goes through at 720p.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 22
What is the most effective way to way improve the continuity of a Cisco TelePresence room?
A. lighting fixtures
B. adornments
C. room color
D. artwork
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 23
Which two wall treatments does Cisco recommend for a Cisco TelePresence room? (Choose two)
A. Use a glass wall.
B. Place a whiteboard on the wall.
C. Use flat paint with neutral color.
D. Use wallpaper with neutral color.
E. Use a wood paneled wall.
F. Use a cinder block wall with neutral color.
G. Use glossy paint with neutral color.
Correct Answer: CE Section: (none) Explanation
Explanation/Reference:
QUESTION 24
Which measurement is performed on the Acoustilyzer AL 1 that filers out low frequency sound to approximate the response of the human ear?
A. A-weighted SPL
B. C- weighted SPL
C. RTA SPL
D. RT-60 SPL
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 25
Which is a design requirement for Cisco TelePresence room aesthetics?
A. Every room should be identical.
B. Maintain continuity in appearance among rooms.
C. Carpet patterns and textures match from room to room.
D. All rooms should be painted brown.
E. The only wall treatment should be paint.
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 26
When performing the Auto White Balance Adjustment on a Cisco TelePresence 3000, which three statements are correct? (Choose three)
A. Lights must be set as they would be during a Cisco TelePresence meeting.
B. The RJ-45 cables must be unplugged from the cameras not being configured to ensure that each camera is set up independently.
C. Ensure that no movement in the room might cross in front of the camera or create shadows on the target board.
D. Target boards should be set up on each table segment at the same time. The adjustment runs on all segments at the same time to capture the exact lighting for a consistent configuration.
E. The adjustment must be run on eachsegment and can be run only one segment at a time.
F. The adjustment needs to be run only on the center camera. The settings are duplicated on the left and right segments.
Correct Answer: ACE Section: (none) Explanation
Explanation/Reference: QUESTION 27
During the RRA, how should you hold the light sensor when taking the majority of light measurements?
A. Horizontally, so it gets the direct lighting from ceiling light fixtures.
B. Vertically, toward the displays to measure the light they put off.
C. Horizontally, toward and untreated windows to measure light coming in.
D. Vertically, so it is reading light as if it were hitting the participant’s face.
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 28
What is the additional bandwidth consumption for the High Frame Rate codec to do 30 fps data collaboration?
A. 2 Mbps
B. 4 Mbps
C. 5 Mbps
D. 6 Mbps
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 29
Which is correct when determining a background color for a Cisco TelePresence room?
A. select a bright color that draws attention
B. select white so everything stands out in front of it
C. select the darkest colors so the plasmas will render other colors more accurately
D. select neutral tones to give the appearance of warmth without too much distraction
Correct Answer: D Section: (none) Explanation
Explanation/Reference:
Our material on our site Cisco https://www.pass4itsure.com/642-188.html is exam-oriented, keeping in view the candidates requirements and level of understanding.Cisco 642-188 materials are in the most popular and easy-to-use PDF version. You can use it on any devices with you anywhere.