Apple - Page 3 of 5 - IT Certification Success Guaranteed, The Easy Way!

Apple 9L0-207 Braindumps, Offer Apple 9L0-207 Actual Questions With The Knowledge And Skills

June 24, 2016 No Comments

Because Apple 9L0-207 exam has changed recently,Flydumps presents the new version of Apple 9L0-207 practice test, which helps candidates to pass the Apple 9L0-207 exam easily.The exam dumps covers all aspect of Apple 9L0-207 exam.You can visit our website to free Apple 9L0-207 download the New Version VCE Player.

QUESTION 11
In the component isolation technique, if you do not get a startup chime and/or a flashing question mark, you check the components of the minimal system by _____.
A. visually inspecting them for damage
B. replacing them with known-good parts in any order
C. adding more known-good parts in a specified order
D. replacing them with known-good parts in a specified order
Correct Answer: D
QUESTION 12
When practicing component isolation, which ONE of the following components would NOT be a part of a minimal system configuration for a PowerBook G4 (12-inch 1.5GHz)?
A. SDRAM
B. Speaker
C. Hard Drive
D. DC-in Board
E. Backup battery
F. Power adapter
Correct Answer: C
QUESTION 13
A customer is experiencing intermittent battery drain while using her PowerBook G4 (17-inch 1.67 GHz) connected to a working power adapter. You have reset the PMU and the problem persists. What is the most likely cause of the problem?
A. Corrupt OS
B. Faulty PMU
C. Faulty logic board
D. Incompatible power adapter
Correct Answer: D
QUESTION 14
To isolate a video problem to hardware or software on a PowerBook G4 (17-inch 1.67GHz), which of the following steps should you try FIRST?
A. Replace the built-in display.
B. Reinstall the appropriate Mac OS.
C. Verify the hard disk with Disk First Aid.
D. Start up from a known-good startup disc.
Correct Answer: D
QUESTION 15
Which one of the following troubleshooting steps is NOT appropriate when troubleshooting an iBook or PowerBook with no video on its built-in display?
A. Hold a bright light against the screen.
B. Check if brightness settings are all the way down.
C. Connect an external display to the iBook or PowerBook.
D. Check the network settings on the iBook or PowerBook.
E. Check the internal video cables & connectors for damage.
Correct Answer: D
QUESTION 16
A customer’s iBook G4 (Late 2004) is freezing intermittently. Which of the following steps should you try FIRST to identify the problem?
A. Try quick fixes.
B. Repair the iBook.
C. Perform a split-half search.
D. Run appropriate diagnostics.
E. Escalate the problem to Apple.
F. Gather information about the problem.

Correct Answer: F
QUESTION 17
Which of the following is ALMOST CERTAINLY a software-related problem?
A. No video on display
B. Single beep at startup
C. No Internet connectivity
D. iPhoto quits when launched

Correct Answer: D
QUESTION 18
A customer states that he cannot open an AppleWorks file. What is the most productive question to ask him FIRST?
A. Can you open any files?
B. Can you open other AppleWorks files?
C. What version of AppleWorks are you using?
D. Is your Mac connected to a network?

Correct Answer: B
QUESTION 19
A PowerBook G4 has no video, but powers on with a normal startup chime, and normal startup sounds from the hard drive. Which of the following steps should you try next?
A. Update the PowerBook G4’s firmware.
B. Replace the PowerBook G4 logic board.
C. Replace the PowerBook G4 LCD display.
D. Connect a known-good external display.

Correct Answer: D
QUESTION 20
You have replaced the optical drive in an iBook G4 (Late 2004). In what THREE ways should you test the repair before returning the system to the customer?
A. Leave the computer on overnight.
B. Verify that the original symptom is resolved.
C. Verify that no new symptoms have occurred.
D. Run all Apple Service Diagnostic tests for the iBook G4 (Late 2004).
E. Run Apple Service Diagnostic optical drive tests for the iBook G4 (Late 2004).
F. Start up the computer in Target Disk Mode to test the internal hard drive.

Correct Answer: BCD

Flydumps Free Apple 9L0-207 exam dumps are audited by our certified subject matter experts and published authors for development. Passtcert Apple 9L0-207 exam dumps are one of the highest quality Apple 9L0-207 Q&As in the world.It covers nearly 96% real questions and answers, including the entire testing scope. Passtcert guarantees you pass Apple 9L0-207 exam at first attempt.

ACTC, Apple

Apple 9L0-060 Certification Material Provider, Buy Latest Apple 9L0-060 Exam Practice PDF Is Your Best Choice

June 24, 2016 No Comments

Where to free download the new Apple 9L0-060 exam questions to pass the exam easily? Now,Flydumps has publised the new version of Apple 9L0-060 exam dumps with new added exam questions.you can also get free VCE and PDF, and the new Apple 9L0-060 practice tests ensure your exam 100% pass. Visit Flydumps.com to get the 100% pass ensure!

QUESTION 11
In Mac OS X v10.4 the default Group and Others permissions for the Drop Box folder in a users Public folder are__________
A. Read only
B. Write only
C. Read & Write
D. No Access

Correct Answer: B
QUESTION 12
When an administrator attempts o drag an application to the Applications folder, a message reports that the file was not moved because the folder, “Applications”, cannot be modified. Which step will correct this issue?
A. Log in with the Master Password.
B. Restart the computer and log in again.
C. Click the Repair Permissions button in Disk Utility
D. Add the administrator to the wheel group on the computer.

Correct Answer: C
QUESTION 13
You connect a USB DEVICE TO YOUR Macintosh keyboard, and see a error message that there is not enough poser available for this device. Which TWO steps could each resolve this problem?
A. Plug the device into a different USB port on the keyboard.
B. Restart the computer with the USB device still connected.
C. Plug the device into a USB port on the back of the computer.
D. Open System Profiler and search for a corrupted device driver.
E. Connect the device to external power rather than using bus power.

Correct Answer: CE
QUESTION 14
What is required when initially configuring a Bluetooth device, such as a cell phone, to pair with a computer running Mac OS X v10.4?
A. The computer or the device must be set to be Discoverable.
B. The computer and the device must have the sleep function disabled.
C. The computer and the device must be within line of sight of each other.
D. The computer or the device must be set to Require Network Authentication
Correct Answer: A
QUESTION 15
What application includes synchronization software for Bluetooth-enabled cellular phones?
A. iSync
B. Setup Assistant
C. Bluetooth
D. Bluetooth Serial Utility
Correct Answer: A
QUESTION 16
You are troubleshooting a volume connected via target disk mode. What could present a problem?
A. Target disk mode volumes are locked by default.
B. Target disk mode volumes have no files system journal.
C. Keychains and preferences must be unencrypted before they can be viewed.
D. Standard Mac OS X file ownership can be ignored, so files can be deleted accidentally.
Correct Answer: D QUESTION 17
In Mac OS X v10.4 a non-administrator user Lind, can sore her files in _________________
A. /System
B. /User/Linda
C. /Home/Linda
D. /Applications

Correct Answer: B
QUESTION 18
Disk Utility can display ______________ (Select all that apply)
A. a disk drive’s capacity
B. a list of partitions on a disk drive
C. the number of files in the system folder
D. the volume format of a mounted partition
E. the number of files on an unmounted partiion
F. a graphic with the locations of file fragments on a RAID volume

Correct Answer: ABCD
QUESTION 19
Your iMac G5 should be able to connect to a network via a built-in Ethernet connection when it starts up in Safe Mode in Mac OS X 10.4?
A. True
B. False

Correct Answer: A
QUESTION 20
Your Macintosh has been exhibiting system problems, so you need to perform troubleshooting and maintenance. Which TWO tasks can you execute from another Macintosh after booting your sysem in Firewire Target Disk Mode?
A. Repair permissions.
B. Partition drive (non-destructive)
C. Enable System Administrator (root) login.
D. Run secure erase to defragment the drive.
E. Use the Repair Disk command in Disk Utility
Correct Answer: AE

All our Cisco products are up to date! When you buy any Apple 9L0-060 product from Certpaper, as “Apple 9L0-060 Questions & Answers with explanations”, you are automatically offered the Apple 9L0-060 updates for a total of 90 days from the day you bought it. If you want to renew your Apple 9L0-060 purchase during the period of these 90 days, your Apple 9L0-060 product is renewed and you are further enabled to enjoy the free Cisco updates.

ACTC, Apple

Apple 9L0-060 Guide Provider, Prompt Updates Apple 9L0-060 Study Material With 100% Pass Rate

June 24, 2016 No Comments

[The Newest Dumps] Real Apple 9L0-060 exam dumps revised by experts, they were updated with the change of the Apple 9L0-060,covering all the whole aspects of Apple 9L0-060 exam. Just have a training of Flydumps Apple 9L0-060 exam questions to guarantee your 100% pass

QUESTION 30
Which two options should be used when Disk Utility cant repair a disk in Mac OS X 10.4?
A. Back up the data, and erase and install Mac OS X
B. Archive and install Mac OS X preserving user and network settings
C. Click Repair Disk one more time to see if a second attempt resolves the issue
D. Archive and Install Mac OS X WITHOUT preserving user and network settings
E. Back up the data and use a Mac OS X 10.4 compatible third-party utility to repair the disk

Correct Answer: AE QUESTION 31
How do you force a Macintosh computer to start up from a disc in the optical drive?
A. Press and hold the V key while the computer starts up, and enter boot cd at the prompt.
B. Press and hold the C key while the computer starts up.
C. Choose “Restart from Disc”from the Apple menu.
D. Press and hold the button for 5 seconds

Correct Answer: B QUESTION 32
When Maria logs in on her Mac OS X v10.4 computer, a utility she recently installed launches and disables the mouse and keyboard.
How can Maria prevent the utility from automatically launching when she logs in?
A. Hold down the V key while the computer start up.
B. Hold down the Shift key immediately after logging in.
C. Hold down the option key while the computer starts up.
D. Log in as another user and use Disk Utility to fix permissions on the boot volume

Correct Answer: B QUESTION 33
How do you start up a Mac OS X computer in single-user mode?
A. Restart while holding down Command -S
B. Restart while holding down command-option-S
C. Choose “Restart in single -user mode” from the Apple menu
D. Select Single-User Mode in the Startup Disk preference and restart

Correct Answer: A
QUESTION 34
Starting up a Mac OS X v10.4 computer in verbose mode is a useful FIRST troubleshooting step when___________
A. applications are crashing frequently
B. you suspect a font might be corrupted
C. the system repeatedly crashes during startup
D. System Profiler cannot identify the startup device

Correct Answer: C
QUESTION 35
After pressing the power button on your Macintosh you hear three beeps instead of a startup chime. What does this indicate?
A. The monitor is not properly connected
B. There is a hardware problem such as bad RAM.
C. The computer was not shut down properly the last time it was used.
D. The computer was unable to locate a disk with a bootable system folder.

Correct Answer: B
QUESTION 36
The Universal Access preferences allow you to ____________
A. create new keyboard shortcuts
B. apply interface themes the Finder
C. configure your computer as wireless access point
D. enable the use of assistive input and output devices

Correct Answer: D
QUESTION 37
You have just completed a default installation of Mac OS v 10.4 (an “easy install”).Which THREE types of applications can run without requiring additional software installations?
A. BSD
B. DOS
C. Java
D. Windows
E. Mac OS 9
F. Native Carbon and Cocoa
Correct Answer: ABC
QUESTION 38
Which application provides the most detail about system processes in Mac OS X v10.4?
A. System Profiler
B. Activity Monitor
C. Process Manager
D. CPU Monitor Expanded Window

Correct Answer: B
QUESTION 39
Which statement is true of protected memory in Mac OS X v10.4?
A. Protected memory is configured in System Preferences
B. Protected Memory is installed in a unique RAM slot on the motherboard.
C. Protected memory safeguard against native application errors impacting other running applications
D. Protected memory uses a temporary file to ensure there is sufficient RAM available for open application.

Correct Answer: C
QUESTION 40
A user is unable to open a document from within an application. Which is not a recommended troubleshooting procedure?
A. Try to open a different document with the same application
B. Double-click the document icon in the Finder while holding down the option key
C. Try to open the document from another application that support the same document type
D. Copy the document to the Shared folder then log in as another user and try to open the document

Correct Answer: B
QUESTION 41
The default network protocol in Mac OS X 10.4 is___
A. IPX
B. SMB
C. TCP/IP
D. Netbios
E. Apple Talk
Correct Answer: C
QUESTION 42
The Lookup tool in Network Utility____________
A. finds the complete route between your computer and another computer on an IP network
B. determines which ports are open on a remote computer
C. resolve host names to IP addresses
D. resolve IP addresses to host names
E. looks up routing table information
Correct Answer: CD
QUESTION 43
What printing system is used by Mac OS X v10.4?
A. Unified Printing Manager
B. Macunosh Printing MANAGER
C. Common UNIX printing System
D. Portable Document Printing System

Correct Answer: C QUESTION 44
An older network printer is not appearing in the list of discovered printers in Printer Setup Utility’s Default Browser pane in Mac OS X v10.4. What is a possible remedy?
A. Select the Apple Talk plugin in Directory Access.
B. Enable the Discover Printers option in Apple Talk preferences
C. Enable the Apple Talk option in the Printing pane of print & Fax preferences
D. Enable the Make Apple Talk Active option in the Apple Talk pane of Network preferences.

Correct Answer: D QUESTION 45
How can you identify who is talking during a multi-way audio conference in Mac OS X 10.4?
A. The buddy’s icon is highlighted
B. By watching the sound-level meter
C. All other participants are dimmed
D. The buddy’s line marked with a “speaking” flag

Correct Answer: B QUESTION 46
What requirements must be met orderto participate in a multti-way video conference in Mac OS X 10.4 iCha?
A. Broadband internet connection, Mac OS X 10.4 iChat and Cinema Display
B. Any internet connection, iChatt AV 2.5 higher, iSigh, and Mac OS X 10.4
C. Any Internet connection. Mac OS X 10.4 iChat, AND COMPATIBLE VIDEO DEVICE
D. Broadband Internet connection, Mac OS X 10.4 iChat, and a compatible video device Correct Answer: D

Worried about Apple 9L0-060 pass results? Adopt most reliable way of exam preparation that is Apple 9L0-060 Questions & Answers with explanations to get reliable high Apple 9L0-060 pass result.Flydumps definitely guarantees it!

ACMT, Apple

Apple 9L0-010 Braindumps, New Release Apple 9L0-010 Dumps PDF For Download

June 20, 2016 No Comments

Flydumps is the best place for preparing IT Certifications as we are providing latest and guaranteed questions for all certifications. We offer you the ultimate preparation resource of Apple 9L0-010 exam question. Wondering what could be this effective? It is our training material which serves as a guide to achieving your dream as a certified professional.

QUESTION 11
When replacing a MacBook Air (Late 2010) embedded battery, it is acceptable to flex or twist the battery pack to aid in removal.
A. True
B. False

Correct Answer: A QUESTION 12
How should you handle an embedded battery once it has been removed from a Mac Book Air (Late 2010)? SELECT TWO:
A. By the edges.
B. Use both hands.
C. Grasping the cells packs.
D. Compressing the top and bottom.
E. Use either needle-nose pliers or metal tongs.

Correct Answer: AB QUESTION 13
If the embedded battery with exposed cell packs from a MacBook Air (Late 2010) is dropped during service, it should always be replaced.
A. True
B. False

Correct Answer: A QUESTION 14
Where is the best place for a customer to look for information about locating her Mac’s serial number?
A. Downloads
B. Discussions
C. Service News
D. User’s manual

Correct Answer: D QUESTION 15
Which piece of information is best used to determine any Mac’s correct AppleCare name?
A. the EMC number
B. the serial number
C. the MAC address
D. the model number

Correct Answer: B QUESTION 16
You are attempting to power a Mac mini (Late 2009) with an 85 Watt power adapter. Will this work?
A. Yes

B. No Correct Answer: B QUESTION 17
A customer brings a Mac Pro to your service center for repair. After finding the serial number, which TWO of the following sources will display the proper AppleCare name for that Mac Pro? SELECT TWO
A. MRI
B. GSX
C. Console
D. Terminal
E. System Profiler
F. Apple Name Tool
G. Apple Hardware Test

Correct Answer: AB
QUESTION 18
A customer brings his MacBook Pro (17-inch Mid-2010) in for servicing. It is not functioning correctly and you suspect the machine has been damaged by the customer. As you inspect for accidental damage, you should open the lid and confirm that the hinges are working smoothly and inspect the LCD for scratches on the display coatings or cracks in the glass. You should also ____________________ and __________________. SELECT TWO
A. open the hard disk drive to check for scratches or dust inside
B. look for cracks, dents or scratches on the exterior of the system
C. connect the system to external speakers to check for sound output
D. check for any unusual odors coming from the system, which might indicate spill damage
E. ask the customer to describe in detail how he abused his computer to the point that it no longer functions

Correct Answer: AD
QUESTION 19
After identifying some accidental damage and pointing it out to the customer, the customer says “Apple’s warranty should cover this kind of problem.” How should you respond?
A. Apple will only cover the internal damage, not the cosmetic damage, so the charge will be less.
B. You’re right, Apple’s warranty does cover this kind of accidental damage, so the repair will be free.
C. Apple’s warranty does not cover this, but the AppleCare Protection Plan might, but only if you buy it now.
D. Apple’s warranty specifically calls out accidental damage as an instance where system failures are not covered.
Correct Answer: D
QUESTION 20
What is the function of the SMC in an Intel Mac?
A. The SMC controls all aspects of power flow.
B. The SMC controls the speed of the hard drive.
C. The SMC manages the amount of virtual memory used.
D. The SMC manages all communication with attached peripherals.

Correct Answer: A
QUESTION 21
Which THREE of the following symptoms would most likely be resolved by performing an SMC reset as a first step? SELECT THREE
A. Computer does not turn on
B. Cursor is unresponsive in Finder
C. Network / Internet connectivity issues
D. USB and/or FireWire port(s) do not function
E. Computer does not sleep / wake from sleep

Correct Answer: ADE
QUESTION 22
Which THREE troubleshooting steps should be attempted if the SD card slot does not appear in System Profiler on MacBook Pro (13-inch, Mid 2009)? SELECT THREE
A. Reset PRAM.
B. Reset the SMC.
C. Force the card into the slot.
D. Back up user data, then erase and reinstall Mac OS X.
E. Remove and reinsert the card with a third party SD card adapter.
F. Start up from the Mac OS X Installer DVD or external disk and check System Profiler.

Correct Answer: ABF
QUESTION 23
Which of the following can permanently damage an LCD display?
A. Rubbing the display.
B. Using a screen saver.
C. Not using a screen saver.
D. Turning brightness up too high.

Correct Answer: A
QUESTION 24
Examine the exhibit.

What is the correct name for this type of pixel anomaly?
A. Dark dot defect
B. Stuck sub-pixel
C. Bright dot defect
D. Vertical TAB fault

Correct Answer: D
QUESTION 25
Which of the following statements describes how CCFL backlighting is similar to LED backlighting when troubleshooting backlighting issues in Apple displays?
A. Both types of displays use fluorescent lights.
B. Both types of displays use light emitting diodes.
C. Both types of displays are diagnosed identically.
D. Both types of displays have components that are individually replaceable.

Correct Answer: C QUESTION 26
The LED on a MacBook (13-inch Late 2009) MagSafe power adapter does not illuminate at all when it is plugged into the MacBook and you know the adapter is connected to a known good power source. What is the most likely cause of this symptom?
A. The MacBook has a faulty backup battery.
B. The MagSafe adapter needs to be reset first.
C. The MacBook has a faulty magnetic sleep sensor.
D. A MagSafe adapter connector pin is stuck down or dirty.

Correct Answer: D QUESTION 27
If an AirPort Extreme Base Station stopped responding, has network accessibility issues, or needs to be reverted back to default factory configuration, you should perform a _______.
A. Soft reset
B. Hard reset

Correct Answer: B QUESTION 28
If you are unable to find the password for an AirPort Extreme or Express Base Station, you should perform a _______.
A. Soft reset
B. Hard reset

Correct Answer: A QUESTION 29
Which THREE of the following probing questions are most appropriate to ask the customer when troubleshooting AirPort issues? SELECT THREE
A. Are wired computers affected as well?
B. Are just wireless computers affected?
C. How much RAM do you have installed?
D. What is the computer’s processor speed?
E. What is the resolution of the computer’s display?
F. Are any hubs, routers, or other computers connected to the network?

Correct Answer: ABF QUESTION 30
Examine the exhibit.

What AirPort Extreme port does the number 3 identify?
A. USB
B. LAN
C. WAN
D. Power
E. FireWire

Correct Answer: C
QUESTION 31
Which of the following is NOT a valid Bluetooth troubleshooting tip for Macs?
A. Check for signal interference.
B. Make sure Bluetooth is turned on.
C. Update Bluetooth software on the Mac.
D. Verify Bluetooth peripheral hardware batteries are charged.
E. Make sure the Bluetooth peripheral is at least 20 meters away from the Mac.

Correct Answer: E
QUESTION 32
You are troubleshooting an iMac (Early 2008) that does not power on. You notice that all diagnostic LEDs remain off when a known-good power cord is connected to the iMac and to a known-good power outlet. What is most likely the cause of these symptoms?
A. Faulty power supply
B. Faulty optical drive
C. Faulty LCD panel
D. Faulty video card
Correct Answer: A
QUESTION 33
Examine the exhibit.

What is this message?
A. Kernel Panic
B. Software Update
C. Firmware Update
D. Power-On Self-Test

Correct Answer: A
QUESTION 34
What is the indication that a Mac has completed a successful power-on self test (POST)?
A. Startup Chime.
B. A series of beeps.
C. The Login Window starts.
D. The Desktop, Dock, and menu bar load.

Correct Answer: A
QUESTION 35
You can use a higher wattage power adapter with an Apple portable computer, but you cannot use one with less wattage without potential operating issues.
A. True
B. False

Correct Answer: A

With the products Apple 9L0-010 for training and preparation of testing you would not only significantly reduce your fees, but pass your exam. We obtain our products from Authorities experts from test center.We give you the best path to successful completion of your exam to the real and original exam questions and answers for Apple 9L0-010.

Acpt, Apple

Apple 9L0-009 Preparation Materials, Up To Date Apple 9L0-009 Exam Tests Online Sale

June 20, 2016 No Comments

Flydumps guarantee your Apple 9L0-009 exam success with our Exam Resources. Apple 9L0-009 braindumps are the latest and developed by experience’s IT certification Professionals working in today’s prospering companies and data centers.All our Apple 9L0-009 brain dumps including Apple 9L0-009 exam questions which guarantee you can 100% success Apple 9L0-009 exam in your first try exam.

QUESTION 35
. Which THREE of the following are clues that may indicate a ‘no power’ condition? SELECT THREE
A. You do not hear a startup chime.
B. You cannot connect to the Internet.
C. You do not hear any fan or drive noise.
D. The cursor is frozen and the system is unresponsive.
E. The power button or power indicator does not light up at all.

Correct Answer: ACE QUESTION 36
. Which TWO of the following are clues that may indicate a ‘no video’ condition? SELECT TWO
A. You do not hear a startup chime.
B. You may hear fan or drive noise.
C. You cannot connect to the Internet.
D. The power button or power indicator lights up.
E. The cursor is frozen and the system is unresponsive.

Correct Answer: BD QUESTION 37
.
Which of the following is ALMOST CERTAINLY a software-related problem?

A. No video on display
B. Single beep at startup
C. No Internet connectivity
D. iPhoto quits when launched

Correct Answer: D QUESTION 38
.
To isolate a video problem as hardware or software on a Mac, which of the following steps should you try FIRST?
A. Replace the built-in display.
B. Reinstall the appropriate Mac OS.
C. Verify the hard disk with Disk First Aid.
D. Start up from a known-good startup volume.

Correct Answer: D QUESTION 39
.
Verifying that a computer functions properly after you repair it ensures that _____. SELECT THREE
A. third-party software is working
B. the original issue has been resolved
C. the computer falls under service warranty
D. the computer will continue to function after the repair
E. no new problems have been introduced during the repair

Correct Answer: BDE
QUESTION 40
.
ESD causes damage to circuits by ________.
A. slowing the circuit down
B. blasting a hole in the circuit
C. cooling the circuit too quickly
D. increasing the circuit’s clock speed

Correct Answer: B
QUESTION 41
.
You are preparing to service a MacBook. To reduce the risk of damage from ESD, you clear the area of plastic, vinyl, or foamed polystyrene, and have static-shielding storage bags available for ESD- sensitive components. While you are working you should also remember to ________________ and _______________. SELECT TWO
A. ground yourself and the equipment you are working on
B. always place ESD-sensitive components on metal surfaces
C. discharge the display to protect the other ESD-sensitive components
D. handle any ESD-sensitive components by the connectors, rather than by the edges
E. ask other technicians to avoid touching you when you are working on ESD-sensitive components

Correct Answer: AE
QUESTION 42
.
Before you leave your bench to take a logic board to a storage place, you should put the board _____.
A. on top of an ESD shielding bag
B. inside an ESD shielding bag
C. inside a cardboard box
D. on a metal table
Correct Answer: B
QUESTION 43
.
You want to follow ESD prevention rules, but your work area is too small for you to be tethered with a wired wrist strap. What is one acceptable alternative solution to this issue?
A. Use a wireless wrist strap.
B. Use a grounded ESD heel strap.
C. Do not practice ESD prevention.
D. Work on the floor instead of a table.

Correct Answer: B QUESTION 44
.
A computer service technician says “I don’t use ESD precautions and have never had a problem.” What (if anything) is wrong with this statement?
A. Nothing is wrong with this statement.
B. ESD damage may not appear immediately.
C. ESD happens only to inexperienced technicians.
D. ESD damage is really not as bad as everyone thinks.

Correct Answer: B QUESTION 45
. Which THREE of the following items are appropriate to use for ESD prevention? SELECT THREE
A. Metal work surface
B. CRT discharge tool
C. Grounded work mat
D. Wrist strap and cord
E. Wireless wrist strap
F. Static-shielding bags

Correct Answer: CDF QUESTION 46
.
You should periodically _____ your ESD mats.

A. clean
B. replace
C. turn over
D. disconnect

Correct Answer: A QUESTION 47
.
Which of the following is NOT a good step to take when working onsite on a computer?

A. Place parts on the floor.
B. Use a grounded ESD mat.
C. Wear a grounded ESD wrist strap.
D. Check the polarity of the grounded power outlet.

Correct Answer: A QUESTION 48
.
When you work at a customer site, you do not need to take any precautions to avoid ESD damage.

A. True
B. False

Correct Answer: B
QUESTION 49
.
You are replacing a logic board in a Mac Pro. You should handle the board by its _____.
A. edges
B. heat sinks
C. connectors
D. components

Correct Answer: A
QUESTION 50
.
Which part or parts of a CRT display should NOT be touched until after the display is disconnected from its power source and the CRT is properly discharged? SELECT ALL THAT APPLY
A. Yoke assembly
B. Anode aperture
C. High voltage cable
D. Front of CRT display
E. Flyback transformer
F. Outer plastic housing

Correct Answer: ABCE
QUESTION 51
.
Which THREE of the following are valid CRT safety rules? SELECT THREE
A. Touch the computer’s metal chassis.
B. Wear a grounded ESD wrist strap.
C. Connect the AC power cord.
D. Remove any metal jewelry.
E. Wear safety goggles.
F. Don’t work alone.
Correct Answer: DEF
QUESTION 52
.
Why do you need to take precautions when disposing of CRT displays? SELECT TWO
A. CRT displays may leak cooling fluid.
B. CRT displays may present a fire hazard.
C. CRT displays may implode if mishandled.
D. CRT displays may present a radiation hazard.
E. CRT displays may contain hazardous materials.

Correct Answer: CE
QUESTION 53
.
Which of the following is a valid precaution you should take when you begin working inside a MacBook Pro (13-inch, Mid 2010)?
A. Reset the SMC.
B. Remove the hard drive.
C. Disconnect the optical drive.
D. Disconnect the main battery.

Correct Answer: D QUESTION 54
.
Which safety issue applies to newer Apple portable models?

A. Fragile bottom case
B. High voltage display
C. Heavy internal frame
D. Soft battery enclosure
E. Sharp logic board edges

Correct Answer: D QUESTION 55
.
Which safety issue applies to the iMac (Mid 2010)?

A. Liquid coolant spillage
B. Thermal grease toxicity
C. High voltage CRT discharge
D. Fragile glass panel breakage

Correct Answer: D QUESTION 56
.
You are removing the main battery from a MacBook Pro (17-inch, Early 2009). Which of the following is a best practice when handling this battery?
A. Handle the battery with one hand, pressing between the soft side and the hard side.
B. Re-cover any punctures or tears in the soft mylar covering with Kapton tape.
C. Handle the battery any way; it does not matter.
D. Hold the battery carefully by its edges only.

Correct Answer: D QUESTION 57
.
When discharging a CRT, what part do you touch with the tip of the discharge tool?

A. Anode aperture
B. High voltage cable
C. Flyback transformer
D. Yoke connector/cable

Correct Answer: A QUESTION 58
.
What precautions should be taken if a discharged CRT must remain exposed for any length of time?

A. You should reset the Power Manager Unit on the logic board.
B. You should perform a full set of video adjustments on the CRT.
C. You should remove the CRT from the computer or display assembly.
D. You should establish an ongoing lead between the CRT anode and ground.

Correct Answer: D QUESTION 59
.
Which of the following most accurately describes what happens during Safe Sleep activation in Mac portables?
A. The contents of RAM are written to NVRAM before sleep.
B. The contents of the hard disk are encrypted before sleep.
C. The contents of RAM are written to hard disk before sleep.
D. The contents of the hard disk are read into RAM before sleep.

Correct Answer: C QUESTION 60
.
Which of the following is NOT a valid power saving technique in recent Mac computers?

A. Disconnect all peripherals.
B. Activate automatic display sleep.
C. Activate automatic hard disk sleep.
D. Use wireless networks instead of wired networks.
E. Set up locations optimized for different environments.

Correct Answer: D QUESTION 61
.
What is the proper way to calibrate the main battery in a MacBook?

A. Charge the battery while running the Battery Calibration Utility.
B. The battery is calibrated out of the box; no further steps are needed.
C. Charge the battery overnight. Make sure battery status indicates 100% before disconnecting AC adapter.
D. Charge the battery fully. Wait 2 hours. Run the MacBook on battery until it goes to sleep. Wait 5 hours. Charge it fully again.
E. Charge the battery halfway. Wait 2 hours. Finish charging the battery. Run the MacBook on battery until it goes to sleep. Charge it fully again.

Correct Answer: D
QUESTION 62
.
You can use a higher wattage power adapter with an Apple portable computer, but you cannot use one with less wattage without potential operating issues.
A. True
B. False

Correct Answer: A QUESTION 63
.
MacBook Air comes with a _____ MagSafe power adapter.

A. 45 Watt
B. 60 Watt
C. 65 Watt
D. 80 Watt
E. 85 Watt

Correct Answer: A QUESTION 64
.
Which of the following can permanently damage an LCD display?

A. Rubbing the display.
B. Using a screen saver.
C. Not using a screen saver.
D. Turning brightness up too high.

Correct Answer: A QUESTION 65
.
Examine the exhibit. What is the correct name for this type of pixel anomaly?
A. Dark dot defect
B. Stuck sub-pixel
C. Bright dot defect
D. Vertical TAB fault

Correct Answer: D

Flydumps offers the most comprehensive Training exam with full of wonderful concepts and learning skills. The training tools on the site Flydumps.com prepares you with the same questions and answers for Apple 9L0-009 from the test center.You may have seen our products.Without hesitate to procure our products. Because it is the best choice for you and even for your career in the future.We promise you 100% pass guarantee.

Acpt, Apple

Apple 9L0-009 Real Exam Questions And Answers, Discount Apple 9L0-009 Test Software On Sale

June 20, 2016 No Comments

Flydumps guarantee your Apple 9L0-009 exam success with our Exam Resources.Our Apple 9L0-009 Flydumps are the latest and developed by experience’s IT certification Professionals working in today’s prospering companies and data centers.All our Apple 9L0-009 Flydumps including Apple 9L0-009 exam questions which guarantee you can 100% success Apple 9L0-009 exam in your first try exam.

QUESTION 11
You are about to replace a MacBook Air (13-inch, Late 2010) logic board. Which of the following is the most important step you should take immediately after removing the bottom case?
A. Remove the thermal module.
B. Install the battery cover.
C. Remove the hard drive.
D. Remove the battery.

Correct Answer: B
QUESTION 12
A MacBook Pro (17-inch Mid-2010) powers on with no image on the built-in display. You connect an external display and restart the MacBook Pro, yet you still see no image on either display. Which of the following is most likely the cause of this symptom?
A. Dead battery
B. Not enough RAM
C. Faulty optical drive
D. RAM not completely seated

Correct Answer: D
QUESTION 13
Examine the exhibit. What is this message?

A. Kernel Panic
B. Software Update
C. Firmware Update
D. Power-On Self-Test

Correct Answer: A
QUESTION 14
What is the indication that a Mac has completed a successful power-on self test (POST)?
A. Startup Chime.
B. A series of beeps.
C. The Login Window starts.
D. The Desktop, Dock, and menu bar load.

Correct Answer: A
QUESTION 15
What is the function of the SMC in an Intel Mac?
A. The SMC controls all aspects of power flow.
B. The SMC controls the speed of the hard drive.
C. The SMC manages the amount of virtual memory used.
D. The SMC manages all communication with attached peripherals.

Correct Answer: A
QUESTION 16
Which THREE of the following symptoms would most likely be resolved by performing an SMC reset as a first step? SELECT THREE
A. Computer does not turn on
B. Cursor is unresponsive in Finder
C. Network / Internet connectivity issues
D. USB and/or FireWire port(s) do not function
E. Computer does not sleep / wake from sleep

Correct Answer: ADE
QUESTION 17
Which THREE troubleshooting steps should be attempted if the SD card slot does not appear in System Profiler on MacBook Pro (13-inch, Mid 2009)? SELECT THREE
A. Reset PRAM.
B. Reset the SMC.
C. Force the card into the slot.
D. Back up user data, then erase and reinstall Mac OS X.
E. Remove and reinsert the card with a third party SD card adapter.
F. Start up from the Mac OS X Installer DVD and check System Profiler.

Correct Answer: ABF
QUESTION 18
Which TWO details are derived from entering an Apple product’s serial number into the Online Service Assistant section of the Apple Support web page? SELECT TWO
A. Mac OS version
B. Warranty status
C. AppleCare name
D. Installed memory
E. Number of USB ports

Correct Answer: BC
QUESTION 19
According to Apple Technician Guides, what should be completed before performing any take-apart steps when replacing a part in any Apple product?
A. Disconnect and reconnect all internal cables.
B. Lay the product on its side so it will not fall over.
C. Discharge the CRT and establish an ongoing ground.
D. Gather all necessary tools and perform all preliminary steps.
E. Order all available service parts for the appropriate configuration of the product.
Correct Answer: D QUESTION 20
Which section of any Apple Technician Guide is the BEST place to look for instructions for replacing an internal component?
A. Views
B. Basics
C. Take Apart
D. Troubleshooting

Correct Answer: C QUESTION 21
A customer asks about RAM speed requirements to upgrade his Mac. To which Apple support site resource should you refer this customer?
A. Downloads
B. Discussions
C. Specifications
D. Technician Guide

Correct Answer: C QUESTION 22
Which of the following scenarios would be most appropriate to use Apple Service Diagnostic?
A. You want to check a Mac for accidental damage.
B. You want to verify product functionality after a repair.
C. Your customer wants to run diagnostics on his Mac Pro.
D. You need to verify that all installed applications have been updated.

Correct Answer: B QUESTION 23
A customer asks if there is a diagnostic that he can use to help troubleshoot a hardware problem with his MacBook Pro. Which of the following solutions should you suggest?
A. Apple Service Diagnostic
B. Apple Hardware Test
C. Terminal
D. Console

Correct Answer: B QUESTION 24
Apple Service Toolkit uses ____ to check Macs with Mac Resource Inspector and other diagnostic utilities.
A. NetBoot
B. Open Firmware
C. Target Disk Mode
D. Apple Remote Desktop

Correct Answer: A QUESTION 25
You are preparing to replace faulty RAM inside a Mac mini (Mid 2010). What should be used to open the bottom cover?
A. Putty knife
B. Philips #00 screwdriver
C. Mac mini (Mid 2010) Logic Board Removal Tool
D. Your hands, no tools are required for this procedure

Correct Answer: D
QUESTION 26
Examine the exhibit. This specialized tool is required for the removal of which component from the Mac mini (Mid 2010)?

A. Fan
B. Memory
C. Bottom Cover
D. Antenna Plate
E. Logic Board Assembly

Correct Answer: E
QUESTION 27
You are about to begin disassembly of an iMac (27-inch, Mid 2010) to replace the LCD display. Which TWO of the following tools are required to do this? SELECT TWO
A. Multimeter
B. Suction cups
C. Service stand
D. Anti-static, lint-free gloves
E. Torx T-15 driver with 5 inch shaft

Correct Answer: BD
QUESTION 28
Examine the exhibit. Why is it necessary to use this Service Fixture when replacing the left fan or heat sink in a MacBook Pro (15-inch, Mid 2009)?

A. This tool is used to avoid flexing the logic board.
B. This tool is used to avoid ESD damage to the logic board.
C. It is impossible to remove these components without this tool.
D. This tool is used to properly align the processor with its socket.

Correct Answer: A
QUESTION 29
What does Apple recommend you do before replacing or installing any internal parts in an Xserve?
A. Remove all drive modules from the Xserve.
B. Remove the Xserve from its rack.
C. Press the System Identifier button.
D. Unlock all drive module bays.

Correct Answer: B
QUESTION 30
Which of the following measurements is an example of an appropriate use of a multimeter when troubleshooting a Mac?
A. Measure logic board battery voltage.
B. Measure high voltage going to a CRT.
C. Measure AC current going to an optical drive.
D. Measure digital signals on the main processor.

Correct Answer: A

Flydumps.com is the absolute way to pass your Apple 9L0-009 exam within no time. An authentic and comprehensive Apple 9L0-009 exam solution is available at Flydumps.com. With our exclusive online Apple 9L0-009 braindump you will pass Apple 9L0-009 exam easily.Flydumps.com guarantees 100% success rate

ACMA, Apple

Apple 9L0-964 Exam Guide, Buy Best Apple 9L0-964 Real Testing Latest Version PDF&VCE

June 18, 2016 No Comments

Completed the Apple 9L0-964 test and passed with high scores.New Apple 9L0-964 test have been changed with many questions last month ago,and now new exam questions and answers have been added on Apple 9L0-964,which is realiable according to my real test.

QUESTION 36
Which keyboard shortcut allows you to view the entire edited sequence in the Timeline?(Select the best answer.)
A. Command-Z
B. Control-Z
C. Option-Z
D. Shift-Z

Correct Answer: D QUESTION 37
Your sequence contains a video gap of 00:00:12;11 that you need to fill with B-Roll footage. Which method completes the edit without overwriting existing video clips?(Select all that apply.)

A. In the Viewer, set an In point on the B-Roll clip at 00:00:12;11. Position the Timeline playhead to the gap’s last frame and set an Out point. Perform an Overwrite edit.
B. In the Viewer, set the duration of the B-Roll clip to 00:00:12;11. Position the Timeline playhead to the gap’s last frame and set an Out point. Perform an Overwrite edit.
C. In the Viewer, set the duration of the B-Roll clip to 00:00:12;11. Position the Timeline playhead to the gap’s first frame. Perform an Overwrite edit.
D. In the Viewer, set the In point of the B-Roll clip to 00:00:12;11. Position the Timeline playhead to the gap’s first frame. Perform an Overwrite edit.

Correct Answer: ABC QUESTION 38
Where in the file system does Final Cut Pro save custom window layouts?(Select the best answer.)
A. Macintosh HD > Library > Application Support > Apple > Final Cut Pro Data
B. Macintosh HD > Library > Application Support > Window Layouts
C. Macintosh HD > Users > [user name] > Library > Preferences > Final Cut Pro User Data > Window Layouts
D. Macintosh HD > Users > [user name] > Library > Application Support > Window Layouts

Correct Answer: C QUESTION 39
Click the image to add the Shot/Take field contents to the Name of the clip.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 40
What is the correct keyboard/mouse order that lets you create a copy of a clip in the Timeline?(Select the best answer.)
A. Command-Click-Drag
B. Click-Drag-Command
C. Option-Click-Drag
D. Click-Drag-Option

Correct Answer: C
QUESTION 41
What is the default for levels of undo?(Select the best answer.)
A. 10
B. 24
C. 32
D. 99

Correct Answer: A QUESTION 42
Click the item that limits the setup options by frames per second.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 43
Which overlay indicates the maximum luma values for a clip are between 90-100 percent?(Select the best answer.)

A. C Correct Answer: A QUESTION 44
Which display option(s) would be needed to manipulate a clip’s position in the Canvas?(Select all that apply.)
A. Image
B. Image + Wireframe
C. Wireframe

Correct Answer: BC
QUESTION 45
You want to edit an imported narration clip at the playhead without erasing or moving the existing audio clips shown in the image. Click the destination patch panel control that will let you do this.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 46
Click the pop-up menu to sync the Viewer and Timeline playheads for real-time multiclip editing.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 47
In the Timeline shown above, you press the M key once. What type of marker is created?(Select the best answer.)

A. Clip
B. Sequence
C. Chapter
D. Compression

Correct Answer: B
QUESTION 48
Click the clip whose playback speed has been adjusted.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 49
Click the icon that allows you to save a transition as a favorite via dragging.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 50
Which QuickTime movie file type copies all media files required to play the movie into one media file? (Select the best answer.)
A. Alias
B. Duplicate
C. Reference
D. Self-Contained

Correct Answer: D
QUESTION 51
Which menu allows you to open and close projects?(Select the best answer.)
A. File
B. Edit
C. Tools
D. Window

Correct Answer: A
QUESTION 52
Which modifier key allows you to drag a clip from V1 to V2 without moving the clip left or right?(Select the best answer.)
A. Control
B. Option
C. Command
D. Shift
Correct Answer: D
QUESTION 53
This clip resides in a conformed sequence. Which parameters have been adjusted on this clip?(Select all that apply.)

A. Scale
B. Rotation
C. Center
D. Anchor Point
E. Crop

Correct Answer: ACE
QUESTION 54
Click the button that will hide the A3 track in the current Audio Mixer view.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 55
Click the Solo control for track A1.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 56
Click the Generator pop-up menu.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 57
Which tool is being used in the edit shown above?(Select the best answer.)

A. Ripple Tool
B. Roll Tool
C. Slide Tool
D. Slip Tool

Correct Answer: D QUESTION 58
Which action allows you to feather an Edge Wipe applied to a Timeline edit point?(Select all that apply.)
A. Double-click the Edge Wipe in the Effects tab.
B. Double-click the Edge Wipe in the Timeline.
C. Choose Edge Wipe from the Effects menu.
D. Control-click the Edge Wipe in the Timeline and choose Open ‘Edge Wipe’.

Correct Answer: BD QUESTION 59
Which button performs an Insert edit?(Select the best answer.)

A. A

Correct Answer: A QUESTION 60
Which tool will let you perform the edit shown above with a single mouse drag?(Select the best answer.)

A. Ripple Tool
B. Roll Tool
C. Slide Tool
D. Slip Tool

Correct Answer: B
QUESTION 61
Which modifier key lets you modify the arrangement of multiclip angles in the Viewer?(Select the best answer.)
A. Control
B. Option
C. Command
D. Shift

Correct Answer: C QUESTION 62
Which icon represents a freeze frame?(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 63
Which image represents the above sequence after clicking with the razor blade?(Select the best answer.)

A. A Correct Answer: A QUESTION 64
Click the location that allows you to trim the outgoing clip with the Selection Tool.(Select the best answer.)

A.
B.
C.
D.

Correct Answer:
QUESTION 65
What does the visual indicator (overlay) along the right side of the Canvas represent?(Select the best answer.)

A. The first frame of an edited clip in the Timeline.
B. The last frame of an edited clip in the Timeline.
C. The end of a sequence.

Correct Answer: C

We provide thoroughly reviewed Apple 9L0-964 using the training resources which are the best for Apple 9L0-964,and to get certified by Microsoft Windows Store apps.It is a best choice to accelerate your career as a professional in the Information Technology industry. Now we add the latest Apple 9L0-964 content and to print and share content.

ACSA, Apple

Apple 9L0-615 Demo Download, Free Download Real Apple 9L0-615 PDF-Answers Latest Version PDF&VCE

June 17, 2016 No Comments

[New Updated Questions ] Where to find the newest Apple https://www.pass4itsure.com/9l0-615.html exam dumps? if you want to pass exam Apple 9L0-615 without the second try, you should download the latest updated Apple 9L0-615 braindump for preparing. Now visit Flydumps.com to get free pdf study guide with valid Apple 9L0-615 exam dumps and free vce dumps, which will help you passing quickly!

QUESTION 35
You want to assign several network users to a group and give them Apple Remote Desktop access authorization to observe and control computers, but not to generate reports. What name should you assign to this group in Workgroup Manager in order to automatically give its members this level of ARD access privileges?
A. ard_admin
B. ard_control
C. ard_manage
D. ard_interact

Correct Answer: D
QUESTION 36
You are configuring accounts in Workgroup Manager. For which type of account can you set a custom login shell?
A. User account
B. Group account
C. Computer account
D. Computer List account

Correct Answer: A
QUESTION 37
You want to use Apple Remote Desktop to manage a group of networked computers. Instead of configuring local user accounts on each machine, you want to use accounts stored on a directory server to specify ARD access privileges. Which of these is a key that you can add to the MCXSettings attribute in a Computers List record to accomplish this goal?
A. ard_list
B. ard_view
C. ard_control
D. ard_interact

Correct Answer: D
QUESTION 38
Review the chart above showing the managed Dock preference identifying the Dock’s position on screen for a user, computer list, and workgroup, then answer the question below.

Where will the Dock be displayed when a user logs in on a managed computer, as a member of this managed workgroup?
A. at the bottom of the screen
B. at the right side of the screen
C. at the left side of the screen

Correct Answer: A
QUESTION 39
How can you designate an Apple Remote Desktop Task Server?
A. Open the Apple Task Server application, click Start Service, and select “Allow remote connections to this server.”
B. Open Remote Desktop, run the Task Server utility from the Task Server menu, and select “Allow remote connections to this server.”
C. Open Remote Desktop, select Use Task Server in the Remote Desktop pane of System Preferences, and select “Allow remote connections to this server.”
D. Open Remote Desktop, then select “Use Task Server on this computer” and “Allow remote connections to this server” in the Task Server pane of Remote Desktop preferences.

Correct Answer: D QUESTION 40
You want to prevent a list of user names from being displayed in the login window. Using the
managed Login Window preferences in Workgroup Manager, how can you require that people type a user name and password to log in?
A. Select the “Secure Login” option.
B. Deselect the “Show all users” option.
C. Select the “Kerberos authentication” option.
D. Select the “Name and password text fields” option.

Correct Answer: D QUESTION 41
Which option can you set in Workgroup Manager for an SMB share point?
A. Mount path
B. Network mounting
C. Access Control Lists
D. Default file permissions

Correct Answer: D QUESTION 42
The managed Dock Display preference for Mary’s user account is set to Never. This means that no managed Dock Display preference
A. will apply at Mary’s next login
B. will ever apply when Mary logs in
C. that depends upon precedence will apply when Mary logs in
D. that is managed at the user account level will apply at Mary’s next login

Correct Answer: D QUESTION 43
Which of these is a feature of an Apple Remote Desktop Task Server?
A. Reviewing reports about a client.
B. Scanning the local network for ARD computers.
C. Scheduling tasks for clients that are currently offline.
D. Turning on powered-down clients using the Lights Out Management protocol.

Correct Answer: C QUESTION 44
You would like to give instructors the ability to perform the Apple Remote Desktop functions of locking and unlocking the screens on computers in a classroom, but you do not want to have the instructors learn to use the Remote Desktop utility. Which of these steps could help you accomplish this goal?
A. Distribute an ARD installation package that includes the tasks and is configured with “sudo” as the default user.
B. Create a Computer List in Remote Desktop and provide an Automator application that contains an ARD workflow to perform the tasks.
C. Use Workgroup Manager to manage the preferences of Remote Desktop for the instructor’s user account, so that only Lock and Unlock are available.
D. Use the Create Admin Installer function in Remote Desktop to create a package that installs on the instructor’s computer a simplified version of Remote Desktop that only performs the Lock and Unlock functions.

Correct Answer: A
QUESTION 45
You are configuring security policies in Mac OS X Server for your Windows user accounts. What password type must you set in Workgroup Manager for these accounts?
A. SASL
B. Crypt
C. clear text
D. Open Directory
E. Active Directory

Correct Answer: D
QUESTION 46
In Workgroup Manager, views in the Views pane of managed Finder preferences are organized under what three headings?
A. Disk View, File View, Folder View
B. User View, Group View, Computer View
C. Finder View, Window View, Network View
D. Desktop View, Default View, Computer View

Correct Answer: D
QUESTION 47
For which account type(s) can you manage the Login Window behavior and message using Workgroup Manager?
A. for user accounts only
B. for group accounts only
C. for computer list accounts only
D. for user and group accounts
Correct Answer: C
QUESTION 48
Which statement describes a difference between parental controls and preference manifests?
A. Preference manifests can be applied by any user, but parental controls can be assigned only by an administrative user.
B. Preference manifests can be applied to any file on the computer, but parental controls cannot be assigned to all applications.
C. Preference manifests can be applied to any managed account, but parental controls are assigned only to local accounts.
D. Preference manifests can be applied to any group1 but parental controls can be assigned only to the user’s group and the “Everyone” group on your server.
Correct Answer: C
QUESTION 49
You want a further measure of control over when user management settings apply. Which setting is available only from the Details pane of Preferences in Workgroup Manager?
A. Once
B. Often
C. Always
D. Never

Correct Answer: B QUESTION 50
In Workgroup Manager, which pane of the Login preferences has settings that can be managed for users, groups, and computer lists?
A. Scripts
B. Options
C. Login Items
D. Login Window

Correct Answer: C QUESTION 51
You want to manage users’ access to the Restart and Shut Down commands in the Apple menu. Which preferences pane in Workgroup Manager lets you control this feature?
A. Dock
B. Login
C. Finder
D. Media Access
E. System Preferences

Correct Answer: C QUESTION 52
You have automated the creation of an “Assignments” folder in each of your students home folders. Before you can manage your students’ Docks so they include this Assignments folder, you must _________
A. use hdiutil to bless the folders
B. enable synchronization for ~/Assignments
C. create an “Assignments” folder in your own home folder
D. configure the Mobility preference to Always apply for each of the students

Correct Answer: C QUESTION 53
What statement is true of the Default network view?
A. The Default network view allows administrators to add FTP servers to users’ /Network.
B. The Default network view is seen by all computers that are not bound to a directory server.
C. If you install Mac OS X in the directory where the Default network view resides, client computers can NetBoot from E
D. You can use the Default network view to assign managed preferences to computers on your network that have no managed preferences, such as guest computers.

Correct Answer: A QUESTION 54
In Workgroup Manager, which managed preference pane includes a setting that allows UNIX tools to run?
A. Login
B. Mobility
C. Applications
D. System Preferences

Correct Answer: C

The Apple 9L0-615 certification can make you a competent person.It may enable a technician to know about the Apple https://www.pass4itsure.com/9l0-615.html configurations,get information about the Apple 9L0-615 data center products and hardware and knowledge about Apple 9L0-615 united computing systems.

Acpt, Apple

Apple 9L0-207 Demo Free Download, Latest Upload Apple 9L0-207 New Questions With Accurate Answers

June 17, 2016 No Comments

100% Valid And Pass With latest Apple https://www.pass4itsure.com/9l0-207.html exam dumps, you will never fail your Apple 9L0-207 exam.All the questions and answers are updated and added to the new version timely by our experts.Also now Flydumps is offering free Apple 9L0-207 exam VCE player and PDF files for free on their website.

QUESTION 70
Exhibit:

In the exhibit, what is item number 3?
A. USB port
B. FireWire 400 port
C. FireWire 800 port
D. 10/100/1000Base-T Ethernet port

Correct Answer: C QUESTION 71
What is the function of the inverter board inside a PowerBook or iBook?
A. The inverter board inverts the speaker signal phase.
B. The inverter board powers the LCD display backlight.
C. The inverter board controls the flow of power to the logic board.
D. The inverter board inverts the image that is displayed on the LCD.

Correct Answer: B QUESTION 72
Exhibit:

What is the module shown in the exhibit?
A. Zip drive
B. Hard drive
C. Optical drive
D. Blower assembly
E. Lithium Ion battery

Correct Answer: C
QUESTION 73
Which of the following items are appropriate to use for ESD prevention?
A. Metal work surface
B. CRT discharge tool
C. Wrist strap and cord
D. Static-shielding bags
E. Static-shielding bags

Correct Answer: CDE
QUESTION 74
Which FOUR of the following actions help reduce the risk of damage from ESD?
A. Ground yourself and the equipment you are working on.
B. Always place ESD-sensitive components on metal surfaces.
C. Handle all ESD-sensitive boards by the connectors, not the edges.
D. Use static-shielding storage bags for ESD-sensitive components.
E. Do not touch anyone who is working on ESD-sensitive components.
F. Do not bring plastic, vinyl, or foamed polystyrene near ESD-sensitive components.

Correct Answer: ADEF
QUESTION 75
Which of the following is the most common example of electrostatic discharge?
A. You touch an object and feel a brief spark.
B. You see a bright flash on the LCD display of an iBook.
C. You plug a power cord into an outlet and you see a spark.
D. You hear a crackling noise coming from inside the computer.

Correct Answer: A
QUESTION 76
What humidity level should be maintained to ensure an ESD-safe environment?
A. 25%-40%
B. 50%-75%
C. 70%-90%
D. 90%-100%

Correct Answer: C
QUESTION 77
What is the BEST way to properly ground an ESD workbench mat?
A. Attach the mat to the unit being serviced.
B. Connect the mat to a grounded electrical outlet.
C. Connect only the wrist strap and cord to a grounded electrical outlet.
D. Connect the wrist strap and cord only to the mat.

Correct Answer: B
QUESTION 78
Which TWO of the following features are available in the Aluminum PowerBook G4 models but not in the Titanium PowerBook G4 models?
A. USB ports
B. PCMCIA slot
C. Built-in modem
D. FireWire 800 port
E. Built-in Bluetooth
F. Built-in wireless networking
Correct Answer: DE
QUESTION 79
Which of the following iBook or PowerBook models requires the use of the 65 watt AC power adapter?
A. iBook G4
B. iBook G4 (14-inch)
C. PowerBook G4 (DVI)
D. PowerBook G4 (15-inch FW800)

Correct Answer: D
QUESTION 80
Identify the correct procedure for starting up a PowerBook in Target Disk Mode?
A. Press the D key during startup.
B. Press the T key during startup.
C. Press the Control and D keys during startup.
D. Press the Control and T keys during startup.
E. Press the Command and D keys during startup.
F. Press the Command and T keys during startup.

Correct Answer: B
QUESTION 81
Which THREE of the following features are available in the Aluminum PowerBook G4 models but not in the iBook G4 models?
A. USB ports
B. Audio input
C. PCMCIA slot
D. Built-in modem
E. Built-in Ethernet
F. FireWire 800 port

Correct Answer: BCF
QUESTION 82
Which of the following iBook or PowerBook models requires the use of the 65 watt AC power adapter?
A. iBook (14-inch)
B. iBook G4 (Early 2004)
C. PowerBook G4 (12-inch)
D. PowerBook G4 (1 GHz/867 MHz)
Correct Answer: D
QUESTION 83
What function does Target Disk Mode perform?
A. It enables direct connectivity with a remote Macintosh over the Internet.
B. It converts a PC-formatted hard disk for use when connected to a Macintosh.
C. It allows access to a Macintosh’s internal hard disk from the Finder of a connected Macintosh via FireWire.
D. It allows two external FireWire hard disk to be connected and transfer data directly between them without need of a computer.

Correct Answer: C
QUESTION 84
A customer needs to transfer data from her PowerBook G4 (17-inch 1.5 GHz) for use on her Power Mac G5, but the PowerBook G4 (17-inch 1.5 GHz) fails to start up completely due to a video issue. Which of the following would most easily accomplish the data transfer?
A. Remove the hard drive the PowerBook G4 (17-inch 1.5 GHz) and install it into the Power Mac G5.
B. The PowerBook G4 (17-inch 1.5 GHz) will need to be repaired before any data can be recovered from it.
C. Boot the PowerBook G4 (17-inch 1.5 GHz) into Mac OS X Safe Mode and connect the PowerBook G4 (17-inch 1.5 GHz) and Power Mac G5 with an Ethernet cable.
D. Boot the PowerBook G4 (17-inch 1.5 GHz) into Target Disk Mode and connect the PowerBook G4 (17-inch 1.5 GHz) and Power MacG5 with a FireWire cable.

Correct Answer: D
QUESTION 85
A Macintosh can startup from Mac OS X, but not from Mac OS 9. If you select the Mac OS 9 System Folder in the Startup Disk preference pane of Mac OS X, a flashing question mark appears on the screen when you restart the computer. What is one possible cause of this condition?
A. The disk was reformatted using Disk Utility for Mac OS X, using the HFS Plus (extended) format instead of HFS format.
B. The disk was reformatted using Disk Utility for Mac OS X, and option to install the Mac OS 9 drivers was not selected.
C. The disk was reformatted using Disk Utility for Mac OS X, using the HFS format instead of HFS Plus (extended) format.
D. This Macintosh does not support booting into Mac OS 9.

Correct Answer: B
QUESTION 86
An iBook (G4) displays a flashing question mark at startup. Which step does Apple recommend you take FIRST?
A. Reset Parameter RAM
B. Try to startup from a bootable CD or DVD
C. Reinitialize the hard disk rein stall the Mac OS
D. Replace the internet hard drive with a known-good hard drive.

Correct Answer: B
QUESTION 87
You are replacing the logical board in a PowerBook G4 (12-inch 1 GHz). Which of the following special tools is recommended during disassembly?
A. Torque screwdriver
B. Nylon probe tool
C. Spring tensioning tool
D. Jumper adjustment tool

Correct Answer: B
QUESTION 88
Which of the following Apple diagnostic utilities is the most appropriate for a service technician to test an iBook (G4)?
A. Mac Test Pro
B. Tech Tool Deluxe
C. Apple Hardware Test
D. Apple Service Diagnostic
Correct Answer: D QUESTION 89
A customer reports that her PowerBook G4 (DVI) shuts down intermittently – sometime immediately after startup. Which of the following is the FIRST step you should take to correct the issue?
A. Reset PRAM.
B. Rest the PMU.
C. Disconnect all external peripherals.
D. Check battery connection to the logic board

Correct Answer: C
QUESTION 90
You are troubleshooting an PowerBook G4 system that has Mac OS X. The icon of a connected external FireWire drive is not appearing on the Finder Desktop. Which of the following would be MOST useful in troubleshooting this issue?
A. Terminal
B. Network Utility
C. Process Viewer
D. System Profiler
E. Apple Hardware Test

Correct Answer: D
QUESTION 91
Which of the following diagnostic utilities can be used by all customers to verify functionality of their own PowerBook and iBook?
A. Mac Test Pro
B. Apple Display Utility
C. Apple Hardware Test
D. Apple Service Diagnostic

Correct Answer: C
QUESTION 92
A customer states that he cannot access the Internet on his iBook G4 using a dialup modem connection. Which of the following is most likely to be the problem?
A. Apple Talk is not enabled on the iBook’s modem port.
B. The customer’s iBook is not configured with a modem.
C. The iBook is not running the latest version of Mac OS X.
D. The telephone cable is plugged into the Ethernet jack.

Correct Answer: D
QUESTION 93
You are attempting to share between your iBook (Early 2004) and a friend’s PC running Windows XP Professional. You have connected the two computers with an Ethernet cable, created a Mac OS X account to allow your friend still cannot access files on your iBook. Which of the following is most likely to be the problem?
A. File Sharing must be enabled on the PC first.
B. The file on your iBook must be converted to PC format first.
C. The IP address settings on your iBook and the PC are not on the same network.
D. You need to use an Ethernet crossover cable to connect the iBook and the PC.

Correct Answer: C
QUESTION 94
A customer states that when an external antenna is connected to her AirPort Extreme Base Station, the external antenna does not appear in the Show Summary screen of AirPort Admin Utility. What is most likely the problem?
A. The base station’s firmware needs to be updated.
B. The base station is malfunctioning and requires service.
C. The base station needs to be powered down and restarted.
D. The base station needs to be reconfigured to use the external antenna.

Correct Answer: C
QUESTION 95
Which of the following are potential sources of interference with an AirPort Extreme network? (Select three)
A. Wood
B. Metal
C. Microwave, oven
D. Cellular telephone
E. 2.4 GHz cordless telephone

Correct Answer: BCE
QUESTION 96
AirPort Extreme operates under which of the following IEEE standards? (Select two.)
A. 802.11a
B. 802.11b
C. 802.11c
D. 802.11g
E. 802.11h
F. 802.11i
Correct Answer: BD
QUESTION 97
To utilize Gigabit Ethernet, you must use an Ethernet cable with.
A. tow wires (one pair) present.
B. four wires (two pairs) present.
C. six wires (three pairs) present.
D. all eight wires (four pairs) present.
Correct Answer: D
QUESTION 98
Which THREE of the following are symptoms of an incorrectly install AirPort Extreme Card?
A. Computer freezes during startup.
B. Computer beeps three times during startup.
C. AirPort operating range is severely reduced.
D. Computer has no network access from any port.
E. Computer reports required AirPort hardware not found?

Correct Answer: ACE QUESTION 99
Basic computer-to-computer wireless networking with AirPort requires ________.
A. two or more AirPort clients
B. two ore more AirPort Base Stations
C. version 2.0.4 or later of the AirPort software
D. an AirPort Base Station and AirPort client

Correct Answer: A QUESTION 100
Which of the following AirPort Extreme ports should be used to connect to a DSLor Cable modem for Internet access?
A. LAN
B. WAN
C. Modem
D. Antenna

Correct Answer: B

Get certified Apple https://www.pass4itsure.com/9l0-207.html is a guaranteed way to succeed with IT careers.We help you do exactly that with our high quality Apple 9L0-207 Certification Certified Information Systems Security Professional training materials.

Acpt, Apple

Apple 9L0-206 Online Exam, Buy Best Apple 9L0-206 Real Questions Answers Online

June 17, 2016 No Comments

Passed Apple https://www.pass4itsure.com/9l0-206.html yesterday on first attempt only using the Exampass premium vce and one corrected answers.Thanks a lot for your valuable update reagding premium dump.It will definitely help me for preparing for the exam before to write.

QUESTION 45
What does recalibrating a Lithium Ion battery inside a PowerBook or iBook actually do?
A. Reconditions the battery to overcome the memory effect.
B. Keeps the onscreen battery time and percent display accurate.
C. Extends the number of full discharge cycles available in the battery.
D. Readjusts the Energy Saver preferences to correspond to the battery’s performance.

Correct Answer: B QUESTION 46
How often should you calibrate a PowerBook G4’s Lithium Ion battery?
A. Never
B. Just once when you first use the PowerBook
C. Whenever the PowerBook is forced into sleep mode
D. When you first use the PowerBook and then every couple of months thereafter

Correct Answer: D QUESTION 47
A customer asks about RAM speed requirements to upgrade his iBook G4 (Late 2004). What Apple resource should you refer this customer to?
A. Downloads
B. Discussions
C. User’s manual
D. Service manual

Correct Answer: C QUESTION 48
You require additional information about a specific problem with a customer’s iBook G4.
Which one of the following resources is the Apple-recommended choice for researching the problem?

A. Downloads
B. Discussions
C. User’s manual
D. Knowledge Base

Correct Answer: D QUESTION 49
According to Apple service manuals, what steps should you take before performing any take-apart steps when replacing a part in any Apple product?
A. Lay the product on its side so it will not fall over.
B. Update the product’s firmware to the latest version.
C. Discharge the CRT and establish an ongoing ground.
D. Gather all necessary tools and perform all preliminary steps.
E. Order all available service parts for the appropriate configuration of the product.

Correct Answer: D QUESTION 50
Which section of the PowerBook G4 (12-inch 1.5 GHz) Service manual is the BEST place to look for instructions for replacing a DC-In board?
A. Views
B. Basics
C. Take Apart
D. Troubleshooting

Correct Answer: C QUESTION 51
Where is the BEST place to look for information regarding special take-apart tools for an Apple product?
A. Discussions
B. Service News
C. User’s manual
D. Service manual

Correct Answer: D
QUESTION 52
Which of the following can permanently damage an LCD display?
A. Rubbing the display.
B. Using a screen saver.
C. Not using a screen saver.
D. Turning brightness up too high.

Correct Answer: A
QUESTION 53
Identify the correct procedure to reset the Power Manager on a PowerBook G4 (12-inch 1.5GHz).
A. Press the PMU Reset button on the main logic board.
B. Shut the computer down and press the reset button for 10 to 15 seconds.
C. Shut the computer down and press Shift-Control-Option-Power on the keyboard.
D. Remove the AC power adapter and battery, and let the computer sit for a minimum of 15 minutes.

Correct Answer: C
QUESTION 54
An iBook operating on battery power is in sleep mode and cannot be awakened. Which of the following is most likely the cause of this problem?
A. The iBook is malfunctioning.
B. The iBook has a crashed PMU.
C. The iBook’s battery is too low to operate the iBook.
D. The iBook’s security features have been activated.

Correct Answer: C
QUESTION 55
Which THREE of the following symptoms would be best resolved by performing a PMU reset as a first step?
A. Computer does not turn on
B. Fans run too loudly after startup
C. Network / Internet connectivity issues
D. USB and/or FireWire port(s) do not function
E. Computer does not sleep / wake from sleep
Correct Answer: ADE
QUESTION 56
What is the function of the PMU in an Apple portable computer?
A. The PMU controls all aspects of power flow.
B. The PMU controls the speed of the hard drive.
C. The PMU manages the amount of virtual memory used.
D. The PMU manages all communication with attached peripherals.

Correct Answer: A QUESTION 57
An iBook G4 is running from the AC adapter, and has a battery installed which is charging. Which TWO of the following indicate that the battery is fully charged?
A. The iBook backlight will return to full intensity.
B. All lights on the battery will illuminate when the button on the battery is pressed.
C. The sleep light will blink three times, indicating that the iBook is no longer charging.
D. The lighted ring on the power adapter connector will change from amber to green.
E. The sleep light will solidly illuminate, indicating that the iBook can be powered on or awakened from sleep.

Correct Answer: BD QUESTION 58
Which THREE of the following actions can put a PowerBook to sleep?
A. Close the PowerBook lid.
B. Press Command-Option-S.
C. Select Sleep from the Apple menu.
D. Select Sleep from the Location Manager.
E. Select Sleep in the Energy Saver pane of System Preferences.
F. Press the Power button and select Sleep from the dialog box.

Correct Answer: ACF QUESTION 59
A customer needs to transfer data from her PowerBook G4 (17-inch 1.67 GHz) for use on her Power Mac G5, but the PowerBook fails to start up completely due to a video issue.
Which of the following would most easily accomplish the data transfer?
A. Remove the hard drive from the PowerBook and install it into the Power Mac G5.
B. The PowerBook will need to be repaired before any data can be recovered from it.
C. Boot the PowerBook into Mac OS X Safe Mode and connect the PowerBook and Power Mac G5 with an Ethernet cable.
D. Boot the PowerBook into Target Disk Mode and connect the PowerBook and Power Mac G5 with a FireWire cable.

Correct Answer: D QUESTION 60
Which of the following Apple diagnostic utilities is the most appropriate for a service technician to test an iBook (G4)?
A. Mac Test Pro
B. Tech Tool Deluxe
C. Apple Hardware Test
D. Apple Service Diagnostic

Correct Answer: D QUESTION 61
What is the first step to take if you have an iBook G4 that constantly ejects any CD / DVD that is inserted?
A. Replace the logic board.
B. Replace the optical drive.
C. Replace the optical drive cable.
D. Disconnect all peripheral devices, especially the mouse.

Correct Answer: D
QUESTION 62
You are replacing the logic board in a PowerBook G4 (12-inch 1.5 GHz). Which of the following special tools is recommended during disassembly?
A. Nylon probe tool
B. Torque screwdriver
C. Spring tensioning tool
D. Jumper adjustment tool

Correct Answer: A
QUESTION 63
Which of the following diagnostic utilities can be used by all customers to verify functionality of their own PowerBooks and iBooks?
A. Mac Test Pro
B. Apple Display Utility
C. Apple Hardware Test
D. Apple Service Diagnostic

Correct Answer: C
QUESTION 64
An iBook (G4) displays a flashing question mark at startup. Which step does Apple recommend you take FIRST?
A. Replace the logic board.
B. Try to start up from a bootable CD or DVD.
C. Reinitialize the hard disk and reinstall the Mac OS.
D. Replace the internal hard drive with a known-good hard drive.

Correct Answer: B
QUESTION 65
You are troubleshooting an PowerBook G4 system that has Mac OS X. The icon of a connected external FireWire drive is not appearing on the Finder Desktop. Which of the following would be MOST useful in troubleshooting this issue?
A. Terminal
B. Network Utility
C. Process Viewer
D. System Profiler
E. Apple Hardware Test
Correct Answer: D
QUESTION 66
You can start up a Macintosh from either Software Restore or Software Install discs.
A. True
B. False

Correct Answer: A QUESTION 67
A customer brings her iBook G4 (Late 2004) in with severely distorted sound. You boot to a known-good disc to rule out software, but the issue persists. Which of the following parts is most likely to be causing the problem and should be replaced?
A. Top Case
B. Logic board
C. Sound board
D. Inverter board

Correct Answer: A QUESTION 68
What is the purpose of Sudden Motion Sensor technology used in the newer PowerBook G4 models?
A. It physically locks the PowerBook down while it is activated.
B. It helps prevent hard drive failures if the computer is dropped.
C. It helps conserve energy by sensing when the hard disk spins up too often.
D. It Changes all Mac OS X location settings based upon your current GPS location.

Correct Answer: B QUESTION 69
A customer’s iBook G4 (Late 2004) will not charge when the AC adapter is plugged in.
You test the iBook with a known good battery and known good A.C. adapter, but the issue persists. What part is the most likely to have failed?
A. DC board
B. Logic board
C. Reed switch
D. Inverter board

Correct Answer: A QUESTION 70
Exhibit: